Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors stocks all the best names in circle track racing carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and aFe Power. Whether you run alcohol or gas, Speedway can fuel your need for speed!

"Oval Track, Fuel Pumps and Accessories" Page 1 of 3

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • AN6 Fuel Shut Off Valve
    $49.99
    Product Rating: 4.67 Stars
    AN6 Fuel Shut Off Valve
    x
                

    Stainless steel ball with Teflon™ packings in machined aluminum housing, fittings and handle.  Straight through installs inline, on and off high flow valve.

     

    Fuel Tank Assembly

     

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
    Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    x
                

    Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.

    • AN 10 inlet fitting, AN 8 outlet fitting
    • Rated 172 GPH flow
    • 6-8 PSI (no regulator required)
    • Viton check valves
    • SOTO diaphrams
    • Gas only! Not for use with alcohol
  • Corner Fuel Pick-Up Assembly, 1/2 Inch
    Corner Fuel Pick-Up Assembly, 1/2 Inch
    x
                1/2" fuel line. Designed for use where maximum fuel pick-up is required. Its unique design allows the fuel line to pick-up the last drop of fuel. A must in limited gallon classes. 
            
  • Fuel Pump/Fuel Filter Housing Tube Clamp
    Fuel Pump/Fuel Filter Housing Tube Clamp
    x
                
    • Holds any 2.075" diameter pump or a 2" diameter fuel filter housing securely to frame
    • Clamps to 1.25" and 1.375" tubing sizes
    • Perfect for Carter or Walbro style pumps and 2" diameter fuel filters
    • Billet aluminum construction
  • Small Block Chevy Fuel Pump Seals
    Small Block Chevy Fuel Pump Seals
    x
                

    This seal was originally developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm, but it also allows the pump to deliver cooler fuel to the carburetor. Uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature. 

    • 91011853-Hol
      • Fits old style Holley/Edelbrock pumps w/ 1/2" NPT ports on opposite end
    • 91011853-Car
      • Fits new style Holley/Carter fuel pumps
  • Seals-It SFP-105 Seal for Billet Fuel Pumps
    Seals-It SFP-105 Seal for Billet Fuel Pumps
    x
                  Keeps hot oil off your billet fuel pump which increases performance, but also will keep fuel out of your oil pan should a failure occur.   
            
  • Holley 12-806 Blue Electric Fuel Pump Check Valve Rebuild Kit
    Holley 12-806 Blue Electric Fuel Pump Check Valve Rebuild Kit
    x
                

    For servicing of Holley Blue electric fuel pump check valve and filter screen.

    425-12806 Instructions (PDF)

  • Pro/Cam Racing 9351 Chevy 6-Valve 7.5 PSI Mechanical Fuel Pump-130 GPH
    Pro/Cam Racing 9351 Chevy 6-Valve 7.5 PSI Mechanical Fuel Pump-130 GPH
    x
                This pump may look similar to others on the outside, but the internal components of the ProCam fuel pump have been re-engineered to reduce leaks and maintain pressure. It is completely reworked to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster. Maintains more constant pressure at high rpms. Blueprinted for longevity and quality. 
    • Re-engineered to reduce leaks and maintain pressure
    • Completely reworked to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster
    • Small Block Chevy applications rated up to 1200 HP on gas; up to 600 HP on alcohol or E85
    • 6 valve, 130 GPH
    • Use of a regulator is recommended for 15 psi fuel pumps

    Changing the Spring Illustration (GIF)

  • Holley 12-811 Rotor and Vane Repair Kit
    Holley 12-811 Rotor and Vane Repair Kit
    x
                This adjustable rotor and vane kit is a must at the track.  Fits both standard and max pressure Holley electric fuel pumps.
            
  • Small Block Chevy Fuel Pump Block Off Plate, Chrome
    Small Block Chevy Fuel Pump Block Off Plate, Chrome
    x
                Chrome plated steel fuel pump block off plate for 1955-83 S/B Chevy.
            
  • Walbro GSL392 Inline Racing Fuel Pump
    Walbro GSL392 Inline Racing Fuel Pump
    x
                These aluminum racing Walbro GL392 inline fuel pumps feature a 255 LPH free flow rate and 60 psi maximum pressure.  They have a lightweight, compact design for durability and simplicity.
    • Overall Length: 6.44"
    • Outside Diameter: 1.70"
    • Aluminum material
    • Natural finish
    • 255 LPH free flow rate
    • 60 psi maximum pressure
    • 10mm X 1.0 inlet size
    • One inlet, female threads
    • 10mm X 1.0 outlet size
    • One outlet, female threads
    • Lightweight, compact design
    • Hardware NOT included

    Be sure to include our hardware installation kit and AN 8 fitting for these Walbro GL392 inline fuel pumps before purchasing. (960929 and 9603040)

  • Speedway Small Block Chevy 110 GPH Racing Fuel Pumps
    Speedway Small Block Chevy 110 GPH Racing Fuel Pumps
    x
                Why pay more when our 6-Valve Racing Pumps will get the job done? These 110 GPH fuel pumps are race tested and proven. The inlet and 3/8" NPT outlet are spaced 180° apart, and the pump head can be clocked for more clearance, if needed.  

    Fits Small Block Chevy 283-400 engines.

    • 3/8" NPT
    • Heavy-duty, fiber-reinforced diaphragm
    • Color-coded springs – matched to O.E. specifications
    • Zinc-plated valves for corrosion-resistance
    • Zamak alloy casting for durability and corrosion-resistance
    • Zytel® spring retainer for smoother, quieter operation
    • Heavy-duty rubber seals protect against leaks
    • Heat-treated rocker arms
    • 100% factory tested for assurance of quality
    • Made in the USA
    • 3/8" NPT Outlets
    • 7 PSI Gas ONLY
  • Speedway Red Electric Fuel Pump
    Speedway Red Electric Fuel Pump
    x
                

    Speedway Electric fuel pump is a standard pressure street pump for gasoline only. It has a maximum pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. 

    • Internally regulated at 7 psi
    • Gravity fed fuel "pusher" design
    • Mount below lowest point of fuel tank
    • 3-1/2" from mounting bracket surface to the very front of the pump
    • Fittings with pump are for 3/8" hose
  • Speedway Dash Mount Fuel Shut-off
    Speedway Dash Mount Fuel Shut-off
    x
                

    Features 3/8" NPT female inlet, AN 6 bulkhead, and Teflon® lined valve. On/off lever turns CCW from closed position to fully open position without interference at bulkhead mounting point.

    Fuel Tank Assembly (GIF)

     

  • Moroso 65750 Lightweight Fuel Pump Pushrod
    Moroso 65750 Lightweight Fuel Pump Pushrod
    x
                

    This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

    • For use in Drag, Oval Track and Street-Performance applications

     

  • Fragola 495022 Pressure Gauge Fitting, 1/8 Female to -3 AN Male 90
    Fragola 495022 Pressure Gauge Fitting, 1/8 Female to -3 AN Male 90
    x
                

    This 1/8" female to -3 AN male 90° elbow adapter fitting is useful when plumbing any pressure gauge. Blue anodized finish.

  • Holley 12-801-1 97 GPH Red Electric Fuel Pump
    Holley 12-801-1 97 GPH Red Electric Fuel Pump
    x
                

    Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

    • Tumble polished billet look
    • Improved design for street/strip applications
    • Distinctive "Red" logo
    • Flows 97 GPH (free flow)
    • Flows 71 GPH at 4 PSI
    • Regulator is not required
    • Motor draws only 2 amps current
    • 7-1/2 Amp fuse recommended
    • Provides constant fuel flow with no pulsation
    • Has externally accessible pressure relief valve (max 7 PSI)
    • Rotor/Vane pump design is more tolerant of contaminated fuels
    • New lower housing casting for enhanced fuel flow and quieter operation
    • Weighs only 2.88 lbs.
    • Includes mounting bracket
    • Repair kits are readily available
    • NOT compatible with alcohol or methanol fuels
    • Use of safety shut-off switch strongly recommended
    • Not designed or recommended for use with fuel injection systems
    • 3/8 NPT inlet/outlet

    425-12801 Instruction Sheet (PDF)

    Fuel Pump Tech Info (PDF) 

  • Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    x
                

    These Super Street Racing mechanical fuel pumps from Carter feature high speed anti-float springs, a heavy duty diaphragm with special springs and rugged lightweight aluminum castings. It also has large, full-flow valves and a tough heat-treated lever.

    • For gasoline only
    • 8 PSI shutoff
    • High speed anti-float springs
    • Heavy duty diaphragm w/ special springs
    • Rugged lightweight aluminum castings
    • Large full-flow valves
    • Tough heat-treated lever arm
    • Has 1/4" NPT inlet & outlet
  • Fuel Safe FP182S Fuel Pick Up, -10 AN
    Fuel Safe FP182S Fuel Pick Up, -10 AN
    x
                Fuel Safe has long been the leader in Sprint car tanks and bladders. For use with alcohol fuel only.
            
  • Pro/Cam Racing 9350 Chevy 6-Valve Mechanical Fuel Pump-130 GPH, 15 PSI
    Pro/Cam Racing 9350 Chevy 6-Valve Mechanical Fuel Pump-130 GPH, 15 PSI
    x
                This pump may look similar to others on the outside, but the internal components of the ProCam fuel pump have been re-engineered to reduce leaks and maintain pressure. It is completely reworked to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster. Maintains more constant pressure at high rpms. Blueprinted for longevity and quality. 
    • Re-engineered to reduce leaks and maintain pressure
    • Completely reworked to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster
    • Small Block Chevy applications rated up to 1200 HP on gas; up to 600 HP on alcohol or E85
    • 6 valve, 130 GPH
    • Use of a regulator is recommended for 15 psi fuel pumps
  • Small Block Chevy Chrome Finned Aluminum Fuel Pump Block Off Plate
    Small Block Chevy Chrome Finned Aluminum Fuel Pump Block Off Plate
    x
                

    Chrome finned aluminum fuel pump block off plate for 1955-83 S/B Chevy.

  • Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    x
                Specially designed for IMCA Modified type motors. Only 3 1/4" diameter and works with gas or alcohol. 100 gph. Includes AN 10 inlet and AN 8 outlet. Includes pump, pulleys, mount bracket, drive mandrel and Gilmer drive belt. Mounts to Small Block Chevy block. Block pump mount.
            
  • Carter M60565 2.3 Ford Gas Fuel Pump
    Carter M60565 2.3 Ford Gas Fuel Pump
    x
                

    This high volume fuel pump for the 2.3L Ford 4 cylinder engine has all the desireable features you would want in a racing mechanical fuel pump. Delivers 4-1/2 to 6-1/2 psi with a 40 gph flow rating. Compatible with GASOLINE only. Has ¼ npt ports for both inlet and outlet.

    • Heavy-duty diaphragm
    • High-speed “anti-float” springs
    • Large “full-flow” valves
    • Lightweight, all-aluminum castings
    • Tough, heat-treated lever
  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    x
                Waterman's latest design Ultralight 2000 Sprint fuel pump incorporates a non-corrosive gear housing to maintain critical tolerances and control heat transfer.  Pump includes a -12 AN inlet and is ready for a three or four way manifold with -6 AN outlets.
            
  • Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    x
                

    The Hilborn direct drive fuel pump has a new billet style rotatable mount. Direct drive and flow-tested. Gives long-lasting, rugged dependability. Convenient quick disconnect. For use with injection or alky carbs. Features hard annodized, aluminum construction. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings.

    All pumps rated at 1800rpm with 50psi. Has one -10 AN inlet and two -6 AN outlets.

  • Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    x
                Fittings  are an integral part of any  racing fuel system. Simplicity within a  fuel system is the idea behind  WRC's "Sure Seal" fittings. These  fittings are reverse flared  for maximum fuel flow and the hose end is  O-ringed for a "Sure Seal!" Eliminate the chance for leakage with the  use of these aluminum fittings.
            
  • Full Flow 90 Degree Socketless Reusable Fittings
    Full Flow 90 Degree Socketless Reusable Fittings
    x
                

    Full flow 90° elbow, AN male/female, steel.

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Chrome B/B Chevy Fuel Pump Blockoff
    Chrome B/B Chevy Fuel Pump Blockoff
    x
                

    Chrome plated steel fuel pump block off plate for 396-454 Big Block Chevy V-8. Includes gasket.

  • Chevy Fuel Pump Push Rod for Flat Tappet Cams
    Chevy Fuel Pump Push Rod for Flat Tappet Cams
    x
                

    This tubular steel fuel pump pushrod is for hydraulic and mechanical "cast" type flat tappet camshafts. Both ends of this pushrod are steel tipped for the best wear characteristics.

    Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990).

    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods
  • Speedway High Performance Black 140 GPH Electric Fuel Pump
    Speedway High Performance Black 140 GPH Electric Fuel Pump
    x
                

    Speedway fuel pumps are designed for street/strip application. Externally accessible pressure relief valves and repair kits are readily available. Not for use with fuel injection systems. Compatible with alcohol or methanol fuels. Flows 140 GPH (free flow). Pressure is pre-set at 9 PSI. A regulator is required.

     

Goto Previous PagePrevious Page
1 2 3