Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 2

Products

Front Panel

Shop Oval Track Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ race car bodies and chassis components are second to none! Speedway has chassis and parts for IMCA Modifieds and other modifieds from top names like Jet Racing, Dirtworks/Harris and Speedway. With a wide selection of nose pieces and steel or aluminum body panels, it’s easy to get your race car looking sharp again. Don't forget about our huge selection of roll cages and bumpers for metric or mid-size chassis, too!

Featured Products
  • Monte Carlo SS Stock Car Nose
    $99.99
    $114.99
    Product Rating: 4.50 Stars
    Monte Carlo SS Stock Car Nose
    (Part #91054211)
    x
                

    Two-piece nose for your Monte Carlo SS.  Just the ticket for IMCA type stock cars.  Nose pieces available in black, white, yellow, red, Chevron (dark) blue, or orange. Sold in sets.

    • Length:  66"
    • Width:  10"
    • Height:  22"
  • 2 Piece Lower Motor Panel - RH
    2 Piece Lower Motor Panel - RH
    (Part #9405611)
    x
                Eagle Motorsports/Schnee Chassis factory-built component. This lower panel is made from durable aluminum and is intended to   protect engine from debris and damage.  Its two-piece design overlaps for a seamless look and allows for easy access   when you need it. Includes pre-cut holes for spuds. Plain finish. Fits on new Eagle Motorsports/Schnee Chassis. 
            
  • D2 Dominator Front Nose Panel Supports
    New
    D2 Dominator Front Nose Panel Supports
    (Part #91054635)
    x
                

    This optional two piece lower front nose support works to strengthen and support your nose panels for an added reinforcement on your Dirt Late Model or Modified race car.  Installation is quick and easy, with assembly done off the car before fitting onto the chassis.

    • Plastic Construction
    • Sold as pair
    • Quick and easy installation
    • Approved in all racing series
    • Extremely durable with unmatched quality
  • D2 Dominator Complete Late Model Dirt Body Nose and Flares
    New
    D2 Dominator Complete Late Model Dirt Body Nose and Flares
    (Part #91054615)
    x
                

    These new D2 Dominator dirt nose and flares are truly cutting-edge, setting a new standard for your Dirt Late Model or Modified race car! Not only do they look intimidating, but the integrated air-flow tunnel maximizes down force by directing air over the nose and across the hood and deck of your race car.

    Dominator flares tuck under the nosepiece for a seamless fit and triangular braces molded into the lower nose add strength for those nights when there’s a big cushion. The nose is a two-piece design with an overlapping center flange for smooth fit and easy mounting. Dominators D2 nose kit has built in rake for better ground clearance along with a 3” air dam for front-end down-force.

    The D2 flares feature a formed fitted overlapping design and are fully adjustable allowing movement front/back & side/side so your team can adjust the flares as needed - both flares feature a unique 3” high formed top edge that directs air onto the deck. The flare sides feature the new “Air-Ramps” that add more down-force than ever before, along with added strength.

    • "Aero-Slick" Nose to smooth air onto deck
    • 3" lower air dam for extreme downforce
    • Overlapping center flanges for easy mounting
    • Aero-designed flares or "Air Ramps"
    • Fully adjustable flares for fine-tune fit
    • Integraded lowers and lower valance
    • Approved in all racing series
    • Extremely durable with unmatched quality
    • Choose from 8 different colors
    • Match with Dominator Graphics to finish off your front end
  • Steel 1/2 Inch Raised Rail Sprint Car Air Box
    Steel 1/2 Inch Raised Rail Sprint Car Air Box
    (Part #9402077)
    x
                

    This half-inch raised rail box is built for strength and durability with its 16 gauge steel body. Its sleek design gives it a longer life compared to its competition. This product fits 1/2 inch raised rail cars like GF1.

    • .06 inch material thickness
    • natural finish
    • sold individually 
  • 1970-81 Upper Camaro Nose, Plastic
    1970-81 Upper Camaro Nose, Plastic
    (Part #91054722)
    x
                1970-1981 Camaro racing nose.  For street stocks and sportsman-type chassis.  Upper piece.  Black only. This nose piece is made of plastic.
            
  • 2 Piece Lower Motor Panel - LH Raised Rail
    2 Piece Lower Motor Panel - LH Raised Rail
    (Part #9405612)
    x
                Eagle Motorsports/Schnee Chassis factory-built component. This lower panel is made from durable aluminum and is intended to protect your engine from debris and damage.  Its two-piece design overlaps for a seamless look and allows for easy access when you need it. Holes pre-cut for spuds. Comes in plain finish. Works with new Eagle Motorsports and Schnee Chassis. 
            
  • Steel 1 Inch Raised Rail Sprint Car Air Box
    Steel 1 Inch Raised Rail Sprint Car Air Box
    (Part #9402078)
    x
                

    This one-inch raised rail box is built for strength and durability with its 16 gauge steel body. Its sleek design gives it a longer life compared to its competition. This product fits most 1" raised rail cars like Eagle, Maxim, and J&J.

    • .06 inch material thickness
    • Natural finish
    • Sold individually 

Filter

"Oval Track, Front Panel" Page 1 of 2

Page 1 of 2

  • Maximum Downforce MD3 Late Model Nose Only
    Maximum Downforce MD3 Late Model Nose Only
    (Part #91054708)
    x
                

    The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Black, Red, Chevron Blue, Yellow or Orange.

    Graphics for Monte Carlo, GTO, Fusion or Charger sold separately.

  • Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Nose
    Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Nose
    (Part #9009252)
    x
                Speedway Motors offers a complete selection of classic Edmumds & Trosel Spring Sprint Car fiberglass body pieces.  All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • Edmunds Modified Style and Trosel Spring Fiberglass Nose
    Edmunds Modified Style and Trosel Spring Fiberglass Nose
    (Part #9009291)
    x
                

    Speedway Motors offers a complete selection of classic Edmumds Modified Style & Trosel Spring Sprint Car fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • Monte Carlo SS Stock Car Nose
    $99.99
    $114.99
    Product Rating: 4.50 Stars
    Monte Carlo SS Stock Car Nose
    (Part #91054211)
    x
                

    Two-piece nose for your Monte Carlo SS.  Just the ticket for IMCA type stock cars.  Nose pieces available in black, white, yellow, red, Chevron (dark) blue, or orange. Sold in sets.

    • Length:  66"
    • Width:  10"
    • Height:  22"
  • D2 Dominator Front Nose Panels, Dirt Late Model
    New
    D2 Dominator Front Nose Panels, Dirt Late Model
    (Part #91054665)
    x
                

    Dominator Race Products did it again and has broke new ground with another cutting-edge design for your Dirt Late Model or Modified race car. The new D2 front nose panel kit will set a new standard in the racing industry!

    • Sold as set
    • Cutting edge design
    • Plastic construction
    • "Aero-Slick" Nose to smooth air onto deck
    • 3" lower air dam for extreme downforce
    • Overlapping center flanges for easy mounting
    • Approved in all racing series
    • Extremely durable with unmatched quality
    • Choose from 7 different colors

     

     

  • Vintage C.A.E. Sprint Car Fiberglass Nose
    Vintage C.A.E. Sprint Car Fiberglass Nose
    (Part #9009271)
    x
                Speedway Motors offers a complete selection of classic C.A.E. Sprint Car fiberglass body pieces.  All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • D2 Dominator Complete Late Model Dirt Body Nose and Flares
    New
    D2 Dominator Complete Late Model Dirt Body Nose and Flares
    (Part #91054615)
    x
                Please view the product's page for more information
            
  • Vintage Ward Watson (4-Bar Style) Sprint Car Fiberglass Nose
    Vintage Ward Watson (4-Bar Style) Sprint Car Fiberglass Nose
    (Part #9009281)
    x
                Speedway Motors offers a complete selection of classic Ward Watson (4-Bar Style) Sprint Car fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow three to four weeks lead time.  

  • Edmunds Style Midget Fiberglass Nose
    Edmunds Style Midget Fiberglass Nose
    (Part #9009321)
    x
                

    Speedway Motors offers a complete selection of classic Edmumds Midget fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time. 

  • MD3 1988 Monte Carlo SS Nose Halves, Pair
    MD3 1988 Monte Carlo SS Nose Halves, Pair
    (Part #91054235)
    x
                These high-impact plastic nose halves for circle track racing feature a 2-piece design with large 1” overlap for easy assembly and added strength with increased front angle for maximum downforce. Just the ticket for IMCA type stock cars.
    • NEW and improved
    • Made with high-impact plastic
    • 2-piece design with large 1” overlap for easy assembly and added strength
    • Increased front angle for maximum downforce
    • Available White, Black, Red, Yellow, Orange, and Blue
    • Stock or mesh appearing grill decals or true upper and lower grill inserts sold separately
  • Eagle Micro Sprint Car Nose Panel, Smooth Center
    Eagle Micro Sprint Car Nose Panel, Smooth Center
    (Part #9601518)
    x
                These micro sprint car nose panels from Eagle Motorsports feature a smooth center while increasing air flow with its unique scoop design.  These panels look and fit great on your micro sprint chassis. 
    • Scoop like shape directs air flow
    • Smooth contours hug chassis
    • Fiberglass construction
    • Choose from black or white finish
  • 2 Piece Motor Panel - LH Standard
    2 Piece Motor Panel - LH Standard
    (Part #9405610)
    x
                Eagle Motorsports/Schnee Chassis factory-built component. This standard panel is made from durable aluminum and is intended to  protect engine from debris and damage.  Its two-piece  design overlaps for a seamless look and allows for easy access  when you need it. Pre cut for spuds. Plain finish. Works with new Eagle Motorsports/Schnee Chassis. 
            
  • Dominator Late Model Dirt Nose and Flare Sets
    Dominator Late Model Dirt Nose and Flare Sets
    (Part #91054610)
    x
                

    The innovative new Dominator dirt nose and flares is truly cutting-edge and sets a new standard for the racing industry! Not only do they look intimidating, but the integrated air-flow tunnel maximizes down force by directing air over the nose and across the hood and deck of your race car.

    Dominator flares tuck under the nosepiece for a seamless fit and triangular braces molded into the lower nose add strength for those nights when there’s a big cushion. The optional two piece lower nose support strengthens things even more. Installation is quick and easy, with assembly done off the car before fitting onto the chassis. Available in red, white, black, blue, yellow, orange or purple.

    Dominator Graphics (GIF)

  • ABC Style Nose Piece
    $134.99
    ABC Style Nose Piece
    (Part #91054702)
    x
                

    Some sanctioning bodies require everyone run the 'ABC' style nose to keep a level playing field, but even though they don't "have" to run them, more and more people are. Choose Grand Prix, Monte Carlo, Impala SS, Camry, Fusion, or Charger.

    Two piece design available in black or white. Graphics and screens sold separately. Mounting hardware not included.

  • 1970-81 Lower Camaro Nose, Plastic
    1970-81 Lower Camaro Nose, Plastic
    (Part #91054824)
    x
                

    1970-81 Camaro racing nose. For street stocks and sportsman-type chassis. Lower piece. Black only. This nose piece is made of plastic.

  • MD3 Modified Nose
    $169.99
    MD3 Modified Nose
    (Part #91064705)
    x
                
    • Approved for use in 2012 by IMCA
    • Contoured fins guide more air over the nose to increase downforce
    • 3 piece design is a universal fit for most modified applications
    • Adjustable front overhang from 35" to 42"
    • High-impact plastic is available in 6 colors

    NOTE: This nose does NOT comply with the 2012 UMP rules.

    910-64705 Instructions (PDF)

  • MD3 Nose/Fenders New Style
    From: $234.99
    Product Rating: 5.00 Stars
    MD3 Nose/Fenders New Style
    (Part #91054719)
    x
                The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
            
  • Vintage Edmunds & Trosel Sprint Car Fiberglass Nose, 4-Bar Style
    Vintage Edmunds & Trosel Sprint Car Fiberglass Nose, 4-Bar Style
    (Part #9009253)
    x
                Speedway Motors offers a complete selection of classic Edmumds & Trosel Sprint Car fiberglass body pieces.  All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • Steel 1 Inch Raised Rail Sprint Car Air Box
    Steel 1 Inch Raised Rail Sprint Car Air Box
    (Part #9402078)
    x
                

    This one-inch raised rail box is built for strength and durability with its 16 gauge steel body. Its sleek design gives it a longer life compared to its competition. This product fits most 1" raised rail cars like Eagle, Maxim, and J&J.

    • .06 inch material thickness
    • Natural finish
    • Sold individually 
  • D2 Dominator Front Nose Panel Supports
    New
    D2 Dominator Front Nose Panel Supports
    (Part #91054635)
    x
                

    This optional two piece lower front nose support works to strengthen and support your nose panels for an added reinforcement on your Dirt Late Model or Modified race car.  Installation is quick and easy, with assembly done off the car before fitting onto the chassis.

    • Plastic Construction
    • Sold as pair
    • Quick and easy installation
    • Approved in all racing series
    • Extremely durable with unmatched quality
Goto Previous PagePrevious Page
1 2