Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Frame

Shop Oval Track Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ race car bodies and chassis components are second to none! Speedway has chassis and parts for IMCA Modifieds and other modifieds from top names like Jet Racing, Dirtworks/Harris and Speedway. With a wide selection of nose pieces and steel or aluminum body panels, it’s easy to get your race car looking sharp again. Don't forget about our huge selection of roll cages and bumpers for metric or mid-size chassis, too!

Featured Products
  • Extra 1-3/4 Inch Tubing for Roll Cage
    Extra 1-3/4 Inch Tubing for Roll Cage
    (Part #91673050)
    x
                

    All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. Tubing is pre-notched where needed for easy assembly. Some notching is still required.

    We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage!

    The kit also includes: 

    • 1-3/4" diameter .104 wall HREW 1020 mild steel tubing
    • Some notching is required
    • Instructions

     

  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    (Part #91025820)
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    (Part #91080250)
    x
                

    These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Single-sided aluminum backing
    • 4' x 6' sheet
  • Steel Body Tab, 1/4 Inch Hole, 1.45 L x 1.48 W
    Steel Body Tab, 1/4 Inch Hole, 1.45 L x 1.48 W
    (Part #91091010)
    x
                Body mount tab made from .080" steel with 1/4" hole.
            
  • Standard Roll Bar Gussets with Holes - Pack of 25
    Standard Roll Bar Gussets with Holes - Pack of 25
    (Part #91073056)
    x
                These standard roll bar gussets have holes. 1-3/4" x 1-3/4". Thickness: 12 ga. (.105)


  • Moroso Performance 62600 Solid Transmission Mount
    Moroso Performance 62600 Solid Transmission Mount
    (Part #54562600)
    x
                

    This solid transmission mount from Moroso Performance must be used in conjunction with Solid Motor Mounts to prevent breakage of engine block and transmission case to torsional stress. This sturdy mount is made from 3/16" steel and features slotted holes on top for transmission mounting and threaded nuts welded to bottom for cross member mounting.

    • Replaces stock OEM-style soft rubber mount to eliminate linkage binding, driveline misalignment, and unwanted transmission movement
    • Black Zinc Finish
    • Steel Construction
    • Sold Each

    Fits:

    • 1958-'88 Chevy with Powerglide
    • TH-350 and TH-400
    • All Borg-Warner, Muncie, Saginaw, Chrysler 4-speed and Doug Nash 5-speed Transmissions, except 1982-'92 Camaro and Firebird

     

  • 25 Lb. Lead Ballast
    $79.99
    Product Rating: 5.00 Stars
    25 Lb. Lead Ballast
    (Part #91045002)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • Ballast Weight Mount Tube Clamp
    Ballast Weight Mount Tube Clamp
    (Part #91045)
    x
                

    Weight mount is used to hang weight from race car. Precision machined aluminum with 1/2" bolt. Available for round tubing sizes: 1-1/4", 1-1/2", 1-3/4"; or 2" square tubing.

Filter

"Oval Track, Frame" Page 1 of 3

Page 1 of 3

  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    (Part #35610393)
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • 25 Lb. Lead Ballast
    $79.99
    Product Rating: 5.00 Stars
    25 Lb. Lead Ballast
    (Part #91045002)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    (Part #91025820)
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • Ballast Weight Clamps
    $11.99
    Product Rating: 4.00 Stars
    Ballast Weight Clamps
    (Part #91047)
    x
                Used for mounting weight or other components to frame. Aluminum brackets are anodized black and tapped for a 1/2"-13 bolt (not included). Options of 1 1/4", 1 1/2", 1 3/4" round or 1-1/2" and 2" square.
            
  • Lead Ballast, Two 13 Lb Pieces
    Lead Ballast, Two 13 Lb Pieces
    (Part #91045003)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. 
    • 1 ½” tall x 2 ½” wide x 8 ½” long
    • Pieces are approximately 13 lbs. each
    • Sold in pairs

    Ships anywhere in the US lower 48 states via USPS Flat Rate for only $5.80 per pair ordered! To take advantage of this shipping offer, please place your order for any other items that you may require on a second or separate order as the lead ballasts must ship alone

    At check out, please place the following "USPS Flate Rate Shipping" in the comments box.  We will then modify your order when processing for shipment at our facility to see that the flat rate shipping cost is applied and reflected on your order.

  • Extra 1-3/4 Inch Tubing for Roll Cage
    Extra 1-3/4 Inch Tubing for Roll Cage
    (Part #91673050)
    x
                

    All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. Tubing is pre-notched where needed for easy assembly. Some notching is still required.

    We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage!

    The kit also includes: 

    • 1-3/4" diameter .104 wall HREW 1020 mild steel tubing
    • Some notching is required
    • Instructions

     

  • Truck Street Stock Roll Cage Kit
    Truck Street Stock Roll Cage Kit
    (Part #91673070)
    x
                All truck roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage! Tubing is pre-notched where needed for easy assembly. Some notching is required. 

    The kit also includes one package of 25 gussets. Instructions are also included with the kit.

    We Pay the Freight! 
    Complete frame kits are shipped freight paid with a common carrier within the 48 states (not in Alaska or Hawaii). They have to be shipped to a business address to receive free freight. It can be shipped to a residential address for a $60 fee. Please be sure to provide a business name and address in the shipping field if going to a business.

    Cage kits will ship within approximately 2-3 days. 

    Please specify in the "Comments" Section of your order the year, make and model of your truck. Full size trucks only.

    916-73070 Instructions (PDF)

  • Tempered Spring Steel, 100 Ft.
    $149.99
    Tempered Spring Steel, 100 Ft.
    (Part #91006220)
    x
                
    • Hardened and tempered
    • 100' roll
    • 1" Wide
    • .062" Thick
    • Great for making body braces
  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

  • Universal Modified Body Mounting Kit
    Universal Modified Body Mounting Kit
    (Part #91054020)
    x
                Consists of 6 pieces of 1" x 1/8" x 36" flat aluminum strap  AND 4 pieces of 1/8" thick 1" x 1" x 60" angle aluminum.

     

  • DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    (Part #35610408)
    x
                

    Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

    • Withstands direct heat up to 400°F and 2000°F radiant heat
    • Protects lines, hoses, cables, and more
    • Aluminized and bonded to fiberglass
    • Flexible and easy to apply
    • Strong self-adhesive backing
    • Use to secure panels, seal air boxes, wrap wiring & more

    Cool Tape Frequently Asked Questions (PDF)

  • AFCO 50323 Ballast Bracket, 1-3/4 Inch Round
    AFCO 50323 Ballast Bracket, 1-3/4 Inch Round
    (Part #10650323)
    x
                

    AFCO Ballast Brackets

    • 1-3/4 Inch Round
  • Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    (Part #91076005)
    x
                Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
            
  • Thermo Tec 13500 Adhesive-Backed Aluminized Heat Barrier, 12 x 12 Inch
    Thermo Tec 13500 Adhesive-Backed Aluminized Heat Barrier, 12 x 12 Inch
    (Part #70413500)
    x
                

    Protect parts and components from radiant heat. This special adhesive-backed material can be used to protect painted surfaces, plastic  parts and more. This heat barrier is composed of woven silica with a flexible aluminized finish and a strong adhesive. The reflective surface of the material is capable of withstanding   radiant temperatures of up to 2000ºF. Material can be easily applied to any surface or wrapped around hoses and wires for a clean professional appearance.

  • Thermo Tec 17062 Thermo-Flex Insulation, 5/8 Inch I.D. x 3 Ft.
    Thermo Tec 17062 Thermo-Flex Insulation, 5/8 Inch I.D. x 3 Ft.
    (Part #70417062)
    x
                

    Thermo-Flex heat shield is a composite material with unlimited uses. The material is manufactured to provide abrasion resistance, thermal insulation and physical containment of hoses and wiring. The combination of aluminum and silica produces a sleeving that is flexible, lightweight and strong. Thermo-Flex can be slit for applications such as wire looms or hosecovering without disconnecting the ends of the wire or hose.

    Thermo-Flex will withstand temperatures in excess of 750º F in radiant heat.

  • AFCO 50321 Ballast Bracket, 1-1/2 Inch Round
    AFCO 50321 Ballast Bracket, 1-1/2 Inch Round
    (Part #10650321)
    x
                

    AFCO Ballast Brackets

    •  1-1/2 Inch Round
  • Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    (Part #91080250)
    x
                

    These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Single-sided aluminum backing
    • 4' x 6' sheet
  • Gusset Kit/Tab Kit, 60 Piece
    $49.99
    $51.99
    Product Rating: 5.00 Stars
    Gusset Kit/Tab Kit, 60 Piece
    (Part #91091025)
    x
                

    This Gusset Kit / Tab Kit includes:

    • (10) - Standard gussets with 1/2" hole
    • (10) - Standard 3 hole gussets
    • (10) - Chassis tab, 3/16" steel with 1/2" hole
    • (10) - Trick tab, 1/8" steel with 1/4" hole
    • (10) - Body tabs, .085" steel with 1/4" hole
    • (10) - seat belt tabs, 3/16" steel with 1/2" hole
  • Stainless Steel Tube Weight Clamp
    $4.99
    $5.99
    Stainless Steel Tube Weight Clamp
    (Part #910471)
    x
                

    This stainless steel "U" clamp is designed to fit around 1.25" or 1.375" diameter tubing.  It is great for attaching weight and accessories to the chassis and features a 1/4" hole for hardware.

    • "U"-shaped clamp
    • Fits 1.25" or 1.375" diameter tubing
    • 1/4" hole for hardware
    • Attaches accessories to racing chassis
  • 1978-1987 GM Metric Midsize Car Roll Cage Kit
    1978-1987 GM Metric Midsize Car Roll Cage Kit
    (Part #91673010)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3