Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Flywheels

Your flywheel helps you hook up all that horsepower by transfering power from the crankshaft to the transmission.  When it comes to putting the ponies to the pavement, we take that very serious which is why we carry the best names in drivetrain technology like McLeod, Brinn, Quarter Master and Bert Transmission.  When you're ready to get serious about your flywheel, trust the pros at Speedway Motors to get you the right parts at the right price.

"Oval Track, Flywheels" Page 1 of 1

  • Bert Transmission 320-NC-EXT Crate Motor Flywheel w/HTD Drive
    Bert Transmission 320-NC-EXT Crate Motor Flywheel w/HTD Drive
    (Part #736320100)
    x
                
    • Fits chev crate motor or one piece rear main seal engines
    • Externally balanced
    • W/HTD pulley with 22 teeth
  • Brinn 79150 CT525 Aluminum Flywheel
    Brinn 79150 CT525 Aluminum Flywheel
    (Part #22079150)
    x
                

    Aluminum Flywheel for CT525 Engine. Includes bolts & two shims. Weighs 2.82 pounds.

    •  Aluminum flywheels and drive flanges are made from aircraft grade 7075 aluminum
    • Aluminum flywheels are hard anodized
    • All flywheels and drive flanges have a SAE 10 tooth internal spline
    • All flywheels feature an integral pulley for 8M-20 HTD timing belts
    • All flywheels have 65 teeth 
    • Brinn flywheels only work with Brinn bellhousings
  • Ram Clutches 1535 2.3 Ford Steel Flywheel, 11.3 lbs
    Ram Clutches 1535 2.3 Ford Steel Flywheel, 11.3 lbs
    (Part #6051535)
    x
                

    This bulletproof steel flywheel from Ram Clutches is drilled for both the 2000cc or 2300cc engines.

    Does not include pressure plate bolts. Use ARP 101-1302201 bolt.

  • Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    (Part #60515121)
    x
                

    These Ram 11 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    New
    Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    (Part #605151212)
    x
                

    Every billet flywheel from Ram Clutches is engineered from SFI certified material. These flywheels are digitally balanced to the proper factory specifications.

    • Lightweight
    • 153 tooth
    • External balance 12.1 lbs
    • 1986-Up Small Block Chevy
    • Steel Material
    • Made in the USA
  • Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    New
    Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    (Part #605151012)
    x
                

    This lightweight flywheel is for your early Small and Big Block Chevy using 10.5" solid or 'unsprung' clutch disk. These flywheels use segmented friction inserts that provide durability as well as resistance to warpage or distortion.

    • Steel Material
    • 12.1 pounds
    • Internal Engine Balance
    • Small and Big Block Chevy
    • 153-Tooth
    • Must be used with Ram flywheel bolts set # 605-530
  • Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    (Part #6051510)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. For 1955-1985 internally balanced 153 tooth small block Chevy applications.

    • 16.8 lbs
    • Typically used with 10-1/2" Ram solid hub clutch disc 605-351 and pressure plate 605-401
    • Will also work with a Ram 605-301M sprung hub or 605-1021 6-pad clutch disc
  • Ford 302 Lightweight Steel Flywheel, 50 oz. 24.6 lbs.
    Ford 302 Lightweight Steel Flywheel, 50 oz. 24.6 lbs.
    (Part #6051525)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. Has 157 tooth count for 302 Ford applications. 

    Will work with a stock clutch with sprung hub.

  • Garage Sale - Quarter Master Button Flywheel, V-Drive/Pro-Series/Optimum-V, 7.25 Inch
    Garage Sale
    Garage Sale - Quarter Master Button Flywheel, V-Drive/Pro-Series/Optimum-V, 7.25 Inch
    (Part #UP42518)
    x
                Please view the product's page for more information
            
  • 1955-1985 Chevy 168 Tooth Aluminum Flywheel
    1955-1985 Chevy 168 Tooth Aluminum Flywheel
    (Part #890603201)
    x
                

    By installing a lightweight aluminum flywheel for your SBC, you automatically bolt on up to 15 horsepower to the wheels. Your engine will reach higher RPMs quicker, due to lighter rotating mass.

    • Made from 6061-T6 billet aluminum
    • Can be used with any type of clutch material
    • Locked locating dowel pins
    • SFI approved
    • Works with 10-1/2" (10.4") and 11" Diaphragm or Borg & Beck pressure plates
    • Inside hole dimension is 2.488 I.D.
    • 14 1/8" in diameter
  • Chevy 1955-1985 Aluminum 153 Tooth Flywheel
    Chevy 1955-1985 Aluminum 153 Tooth Flywheel
    (Part #890603209)
    x
                

    By installing a lightweight aluminum flywheel, you automatically bolt on up to 15 horsepower to the wheels. Your engine will reach higher RPMs quicker, due to lighter rotating mass.

    • Manufactured from 6061-T6 billet aluminum
    • Can be used with any type of clutch friction material
    • Locked locating dowel pins
    • SFI approved
    • Works with 10-1/2" (10.4") Diaphragm or Borg & Beck pressure plates
    • Weighs 10.84 lbs
    • 12 7/8" in diameter
  • Brinn 79130 Small Block Chevy Steel Flywheel, 1 Piece Main, 1986-Up
    Brinn 79130 Small Block Chevy Steel Flywheel, 1 Piece Main, 1986-Up
    (Part #22079130)
    x
                

    Steel flywheel for use with Brinn Racing Transmission.

  • Ford 302/351W Lightweight Steel Flywheel, 28 oz., 24.6 Lbs.
    Ford 302/351W Lightweight Steel Flywheel, 28 oz., 24.6 Lbs.
    (Part #6051520)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. Has 157 tooth count for 302/351W Ford applications.

    Will work with stock clutch disc.

  • Garage Sale - Tilton Small Block Chevy 5.5 Inch Button Flywheel
    Garage Sale
    Garage Sale - Tilton Small Block Chevy 5.5 Inch Button Flywheel
    (Part #70150342)
    x
                

    Tilton 5-1/2 Inch two piece rear main seal button for small block Chevy.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Ford 302 Lightweight Steel Flywheel, 50 OZ, 24.6 LBS.
    Garage Sale
    Garage Sale - Ford 302 Lightweight Steel Flywheel, 50 OZ, 24.6 LBS.
    (Part #UP26800)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. Has 157 tooth count for 302 Ford applications.

    Note: Not for use with stock clutch disc as springs on friction disc hub will not clear flywheel bolts.

     

    This flywheel is garage sale priced because it has been bolted on and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Brinn 79084 Small Block Chevy Aluminum Flywheel, 2 Piece Main, 1955-85
    Brinn 79084 Small Block Chevy Aluminum Flywheel, 2 Piece Main, 1955-85
    (Part #22079084)
    x
                

    Aluminum flywheel for use with Brinn Racing Transmission.

  • Quarter Master 509113SC Button Flywheel for 7.25 Inch Clutch, Chevy
    Quarter Master 509113SC Button Flywheel for 7.25 Inch Clutch, Chevy
    (Part #910105404)
    x
                

    These button-style flywheels from Quarter Master are engineered for use with rear mount bellhousings and flexplate assemblies. They are designed and manufactured in-house, using stringent quality control methods to ensure excellent product performance and availability.

    • Late Chevy externally balanced, one-piece rear main seal
    • For V-Drive, Optimum-V, and Pro-Series
    • 7.25" Clutch Unit
    • Use with rear mount bellhousings and flexplate assemblies

    Quarter Master Engineering & Design (PDF)

    Note: This is for use with Race applications only - not intended for Street use.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

  • McLeod 563300 Flathead Ford Aluminum Flywheel with Steel Insert
    McLeod 563300 Flathead Ford Aluminum Flywheel with Steel Insert
    (Part #91015624)
    x
                

    A lightweight aluminum flywheel robs less horsepower from your flathead and will allow it to rev and respond more quickly. This high quality flywheel is machined from aluminum and has a steel insert friction surface. It's best suited for high performance, supercharged or race oriented flatheads.

    Will accept 10.5" and 11" Ford pressure plates, and 10.5" Borg & Beck Diaphram pressure plates.

    T-5 and Adapter Tech Tips (Link)

  • Chevy Lightweight Steel Flywheel, 168 Tooth
    Chevy Lightweight Steel Flywheel, 168 Tooth
    (Part #6051515)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. For 1955-1985 internally balanced small block Chevy applications.

    • Made of 1045 billet steel
    • 168 tooth
    • 21.7 Lbs.
    • Use 11" clutch

    Note: Not for use with stock clutch disc as springs on friction disc hub will not clear flywheel bolts.

  • Ram Clutches 1511 Pre-1986 S/B Chevy Billet Steel Flywheel, 153 Tooth
    Ram Clutches 1511 Pre-1986 S/B Chevy Billet Steel Flywheel, 153 Tooth
    (Part #6051511)
    x
                RAM billet steel flywheels are recommended as replacements for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. RAM billet steel flywheels are CNC machined from certified materials and exceed SFI specifications. After machining, the flywheels are blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc. Use steel flywheels in heavier drag race cars or for the best driveability in street driven vehicles.
    • Will fit 5 or 6 spring clutch disc hubs
    • Chevrolet 8 cylinder internally balanced  
    • 153 tooth    
    • 12-3/4" diameter        
    • 26 pounds    
    • 10.5 B&B Diaph, 11 Long clutch bolt patterns
  • RAM Clutches 1550  Billet Steel Flywheel, 1997-2004 GM LS1, 168 Tooth
    New
    RAM Clutches 1550 Billet Steel Flywheel, 1997-2004 GM LS1, 168 Tooth
    (Part #6051550)
    x
                

    RAM billet steel flywheels are recommended as replacements for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. RAM billet steel flywheels are CNC machined from certified materials and exceed SFI specifications. After machining, the flywheels are blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc. Use steel flywheels in heavier drag race cars or for the best driveability in street driven vehicles.

    • SFI Rated
    • Steel Material
    • Sold Individually
    • 1997-2004 GM LS1
  • Ram Clutches 1514-10 1986-UP Chevy Light Flywheel 153-Tooth Intern Bal
    Ram Clutches 1514-10 1986-UP Chevy Light Flywheel 153-Tooth Intern Bal
    (Part #60515141)
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • Bert Transmission 370-NYM Flywheel Ring Offset
    Bert Transmission 370-NYM Flywheel Ring Offset
    (Part #7363701)
    x
                Bert Racing Transmission Replacement Parts
            
  • Brinn 79151 CT525 Steel Flywheel
    Brinn 79151 CT525 Steel Flywheel
    (Part #22079151)
    x
                

    Steel Flywheel for CT525 Engine. Includes bolts & two shims. Weighs 5.18 pounds.

    • Steel flywheels are made from through-hardened, 4140 steel for increased strength and durability
    • All flywheels and drive flanges have a SAE 10 tooth internal spline
    • All flywheels feature an integral pulley for 8M-20 HTD timing belts
    • All flywheels have 65 teeth 
    • Brinn flywheels only work with Brinn bellhousings
  • Ram Clutches 1558F Steel Flywheel GM LSA/LSX, 8 Bolt
    New
    Ram Clutches 1558F Steel Flywheel GM LSA/LSX, 8 Bolt
    (Part #6051558)
    x
                

    RAM Billet flywheels are precision machined in house, surface ground, and match balanced for your application. RAM flywheels feature 1/4 inch thick inserts for maximum heat dissipation and long service life.

    • SFI Rated
    • For GM LSA/LSX engines
    • Steel Material
    • Sold Individually
    • Hardware NOT included

    Note:  This is a flat flywheel (not a stepped LS2 or LS7 flywheel).  LS2 and LS7 applications use a stepped flywheel and clutch package.  If you are using this flywheel on an LS2 or LS7 application you must use a clutch designed for a flat flywheel and not the stock stepped style clutch.

     

     

  • Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    (Part #60515101)
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002902. 

  • Small Block Chevy Steel Flywheel, 153 Tooth, 1-Piece Main
    Small Block Chevy Steel Flywheel, 153 Tooth, 1-Piece Main
    (Part #6051530)
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. 

    • Works with 10-1/2" Borg & Beck and diaphragm style pressure assemblies
    • Externally balanced
    • For 1986-up GM 5.0 & 5.7 V-8 with manual transmission applications
  • Brinn 79070 Small Block Chevy Steel Flywheel, 2 Piece Main, 1955-1985
    Brinn 79070 Small Block Chevy Steel Flywheel, 2 Piece Main, 1955-1985
    (Part #22079070)
    x
                

    Steel flywheel for use with Brinn Racing Transmission.

  • Zoom 5.5 Inch Flywheel
    $134.99
    $174.99
    Garage Sale
    Zoom 5.5 Inch Flywheel
    (Part #89095513)
    x
                

    A full line of replacement parts for your 5.5" Zoom Circle Track Racing clutch. Put the proven performance of Zoom clutches in your race car! Speedway offers Zoom 5.5" and 7.5" clutch packs in dual- and triple-disc setups. Clutches are available for small-block Chevy and Ford applications and are serviceable with a full line of Zoom replacement parts.

    • forged 7075 T6 aluminum covers
    • high-strength 4130 steel floater plates
    • premium friction discs for optimum performance and durability

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Ram Clutches 8530 2.3 Ford 135 Tooth Flexplate
    Ram Clutches 8530 2.3 Ford 135 Tooth Flexplate
    (Part #6058530)
    x
                Required for use with Ram 7.25 Single Disc Clutch # 605-8730.
            
  • Ram Clutches 1501 Pre-1986 S/B Chevy Billet Steel Flywheel, 168 Tooth
    Ram Clutches 1501 Pre-1986 S/B Chevy Billet Steel Flywheel, 168 Tooth
    (Part #6051501)
    x
                RAM billet steel flywheels are recommended as replacements for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. RAM billet steel flywheels are CNC machined from certified materials and exceed SFI specifications. After machining, the flywheels are blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc. Use steel flywheels in heavier drag race cars or for the best driveability in street driven vehicles.
    • Will fit 5 or 6 spring clutch disc hubs
    • Chevrolet 8 cylinder internally balanced  
    • 168 tooth    
    • 14" diameter        
    • 33 pounds    
    • 10.5, 11 B&B, Diaph, 11 Long clutch bolt patterns
  • SFI-Rated Steel Flywheel for 1986-1992 Chevrolet 305-350 V8 SB
    SFI-Rated Steel Flywheel for 1986-1992 Chevrolet 305-350 V8 SB
    (Part #890630581)
    x
                These  SFI-Rated Flywheels are engineered to handle extreme duty applications  and designed to take the punishment of today's high horsepower engines. These billet steel flywheels are CAD engineered and precision CNC machined  to strict tolerances. The choice of 5 out of 6 winning engine builders  at the Engine Master Challenge four years running, these billet steel  flywheels were awarded "Best New Product of the Year" at the 2006 Hotrod  & Restoration Show.                                
    • SFI 1.1 approved
    • High carbon steel ring gear
    • 1 piece rear seal
    • 29 lbs
    • External balance
    • Removable counterweight
    • 153 teeth
    • SFI certified
    • Clutch Application Notes:
      • Fits 10″, 10.5″, 10.95″ B & B Diaph
      • 10″ & 10.5″ Long
      • 10″ Diaph
    • Engine Applications:
      • Chevrolet
      • 305-350 (1986-1992)