Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Headers & Exhaust At Speedway Motors

Speedway Motors has racing headers to fit many different chassis, from late models to IMCA Modifieds. We also stock a great selection of header kits, collectors and tubing so you can repair your damaged headers or fabricate a custom set for your application. Speedway can also help you reduce heat and noise with header wraps and racing mufflers.

"Oval Track, Exhaust Headers" Page 1 of 15

  • Header Collector, 1 3/4 Inch Primaries
    Header Collector, 1 3/4 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-3/4" tube size. 
            
  • Big Block Chevy Header Kit
    $145.99
    Product Rating: 5.00 Stars
    Big Block Chevy Header Kit
    x
                These B/B Chevy (BBC) headers feature 18 gauge mild steel designed for many racing and rodding applications. Cutting, fitting and welding required.  Has a 2" tube and 3-1/2" collector.

    Kit includes eight mandrel-bent primary tubes,  two pre-formed collectors, two extra-thick oval port flanges, two gaskets and twelve header bolts.
  • DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    x
                DEI Pipe Wrap is used in many types of  applications for reducing  unwanted and harmful heat under the hood and  from entering the driver  compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • Tight-Fit Small Block Chevy Block Hugger Headers, Black
    Tight-Fit Small Block Chevy Block Hugger Headers, Black
    x
                

    These small block Chevy tight-fit headers are the most universal steel tube shorty headers available. They even fit difficult applications where space is limited. The block hugger headers are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • 1-5/8" primary tubes
    • 2-1/2" collector
    • Head Flange Thickness:  0.35"

    Header Dimensions (JPG)

  • Small Block Chevy Header Kit, 1-7/8 Standard Port, 3-1/2 Collector
    Small Block Chevy Header Kit, 1-7/8 Standard Port, 3-1/2 Collector
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiasts, this kit will require some cutting, fitting and welding.

    • Thick 1/4" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flange to the bend
  • Header Collector, 2 Inch Primaries
    Header Collector, 2 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 2" tube size. 
            
  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Cast Iron
    Tru-Ram Small Block Chevy Exhaust Manifolds, Cast Iron
    x
                

    If you're looking for the power of headers, a distinctive look and the dependability of cast iron, we have the hot setup for small-block Chevys: the Tru-Ram® exhaust manifold. We started with a clean slate and designed an exhaust manifold that will give you looks and performance never before available in cast iron.

    • Provides a tight-fit for steering and clearance issues
    • Flows better than original Corvette manifolds
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • 2-1/2" collector uses standard reducers or tight tube extensions
    • Includes mounting hardware and gaskets
    • Tru-Ram Dimension Chart (GIF)

    Header Dimension Chart

    Note: The exhaust port size is square and large enough for most round port heads. It measures 1.375" x 1.375" and should be sufficient for most small block cylinder heads. Variation in location of spark plugs on aftermarket heads makes it impossible to verify that the Tru-Ram® will fit all heads on the market, but it will clear most straight and angle plug heads.

  • Header Collector, 1 5/8 Inch Primaries
    Header Collector, 1 5/8 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-5/8" tube size.
            
  • Small Block Chevy Hugger Headers for Angle Plug Heads, AHC Coated
    Small Block Chevy Hugger Headers for Angle Plug Heads, AHC Coated
    x
                

    These tight-fit headers are designed to be used with standard exhaust port Small Block Chevy heads that have angle spark plugs. Features 1-5/8" primary tubes and 2-1/2" collectors with 2-1/4" outlets. Comes with bolts, gaskets and reducers. The port openings on the header are round and work fine on heads with round or rectangle ports.

    These shorty headers feature our unique AHC ceramic coating. Armor Hot Coating (AHC) is a heat resistant, ceramic coating applied to the outside of the header. This coating will reflect heat, which helps retain more heat within the header tube while simultaneously speeding up the exhaust flow. Not only will this coating help you make more horsepower, it also keeps your headers rust-free, looking great, and lasting longer (when properly maintained). If you are looking for a show-quality finish for your headers, this is it! Our AHC  ceramic coated headers will withstand exhaust temperatures of up to 1300° F.

    Header Dimensions (GIF)

  • Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, this kit will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
    • 1-5/8” primary tubes
    • 3” collectors
  • Header Collector, 1 7/8 Inch Primaries
    Header Collector, 1 7/8 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-7/8" tube size.
            
  • Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    x
                

    To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

    The coating also works excellent as a paint directy on metal surfaces.                 

    CANNOT BE SHIPPED BY AIR!

  • 429-460 Big Block Ford Header Kit
    429-460 Big Block Ford Header Kit
    x
                

    Save money by welding and assembling your own headers! This B/B Ford V8 header kit will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers.

    • 2" primaries
    • 3-1/2" collectors
    • (8) 18-gauge mild steel 2" mandrel-bent primary tubes
    • (2) Pre-formed 3-1/2" collectors
    • (2) Extra-thick standard-port 5/16" flanges
    • (2) Gaskets
    • Header bolts

    Designed for the seasoned, hands-on enthusiast, the kit will require some cutting, fitting and welding.

  • Header Collector, 1 1/2 Inch Primaries
    Header Collector, 1 1/2 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-1/2" tube size.
            
  • Left Side Crash Replacement Dirt Late Model Header, Spread Port Flange
    Left Side Crash Replacement Dirt Late Model Header, Spread Port Flange
    x
                

    Left hand side crash replacement Dirt Late Model Headers with Spread Port Flange for American Made, Barry Wright, Bullitt, Morris, Rocket, Swartz and others with 2 5/8" offset & 6" setback.

    Tube Size: 1.750"-1.875"

  • Left Side Crash Replacement IMCA Mod. Header, 1-3/4 Inch, Small Block Chevy
    Left Side Crash Replacement IMCA Mod. Header, 1-3/4 Inch, Small Block Chevy
    x
                

    Left hand side crash replacement headers for Modified design for GRT, Kosiski, Smileys and TRE.

    Tube Size: 1.75"

    Application: Small Block Chevy  

  • Dynatech   790-00100 Ceramic Coating Option for Headers
    Dynatech 790-00100 Ceramic Coating Option for Headers
    x
                

    Great option for increasing the life, horsepower and appearance of your new Dynatech®s. All headers purchased with this option are coated inside and outside. The coating will significantly reduce the underhood temperature of your car - which translates into a small horsepower gain, not to mention it it makes those headers look great! Headers purchased with this ceramic coating come with a lifetime rust-through warranty and a customer satisfaction guarantee.

    Note: This option can only be ordered in conjunction with Factory Shipped Dynatech® products. 

  • Dynatech   Late Model Exhaust, 1-3/4 to 1-7/8 Inch, Std. Chevy 550+HP
    Dynatech Late Model Exhaust, 1-3/4 to 1-7/8 Inch, Std. Chevy 550+HP
    x
                

    Dynatech® pavement car exhaust systems start with Dynatech®’s 35” equal length headers. Although difficult to construct, equal length headers deliver maximum torque and horsepower and are used by the best drivers and teams in the country.

    All Dynatech® headers are built with CNC laser machined flanges. With port holes accurate to .003” and total warp less than .025”, you can be assured that you will get all the performance and quality possible from your headers.

    • CNC laser-cut flange
    • Built to fit with proper clearance
    • Optimized tube length for power
    • 35" equal length primaries for maximum torque and horsepower
    • Valve covers are removable with headers installed
    • Removable collectors
    • Tube Size: 1-3/4" - 1-7/8"
    • HP Range: 550 +

    Header Dimension Chart

  • Left Side Crash Replacement Late Model Header, Ford N351, 1-5/8 - 1-3/4 Inch
    Left Side Crash Replacement Late Model Header, Ford N351, 1-5/8 - 1-3/4 Inch
    x
                

    Left hand side crash replacement Late Model Ford N351 Headers.

    Tube Size: 1 5/8" - 1 3/4"

    Application:  Late Model Ford N351

  • Schoenfeld 3065VYN Tri-Y Headers for Roush Yates 360 Ford
    Schoenfeld 3065VYN Tri-Y Headers for Roush Yates 360 Ford
    x
                These Tri-Y racing headers feature 3 inch collectors and allow  additional clearance for mufflers. They are designed to work with Roush  Yates 360 Ford engines.
    • For Roush Yates 360 Ford
    • Tri-Y forward sweep design for added muffler clearance
    • 3" collectors
    • Steel construction
  • Dynatech   Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    Dynatech Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Dynatech   Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port, 3-1/2 Collector
    Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port, 3-1/2 Collector
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, this kit will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
  • Left Side Crash Replacement Pierce Mod. Header, 1-3/4 - 1-7/8 In., Spread Port
    Left Side Crash Replacement Pierce Mod. Header, 1-3/4 - 1-7/8 In., Spread Port
    x
                

    Left hand side crash replacement Pierce Modified Header with spread port.

    Tube Size: 1.750"-1.875"

    Application: Small Block Chevy 

  • Dynatech   IMCA Modified Headers, Angled Adj, 1-5/8 - 1-3/4, 3 Collector
    Dynatech IMCA Modified Headers, Angled Adj, 1-5/8 - 1-3/4, 3 Collector
    x
                
    • Fits angle or straight plug heads
    • For Standard Chevy or Crate Engine applications
    • Gaskets, bolts and hardware included

    Header Dimension Chart

  • Dynatech   Stainless Steel Merge Collector, 2 In. Slip Over, 3-1/2 In. Outlet
    Dynatech Stainless Steel Merge Collector, 2 In. Slip Over, 3-1/2 In. Outlet
    x
                

    Dynatech® merge collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it and go" part. In order to realize the full potential of this collector disign, dyno testing is recommended. (See Notes tab)

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower

    Note: 9:1 applications must use stainless (not mild steel) merge collectors for best performance and durability.

  • Left Side Crash Replacement Modified Chevy Header, 1-3/4 Inch
    Left Side Crash Replacement Modified Chevy Header, 1-3/4 Inch
    x
                

    Left hand side crash replacement Modified Header for Harris, Skyrocket, Hughes, Victory, BMS, J Car, Jet and Sardeson.

    IMCA Modified Header 

    Tube Size: 1.750"

    Application: Small Block Chevy   

  • Dynatech   780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    Dynatech 780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech   Headers: Pierce, Spread Port, 1-3/4 - 1-7/8, 3-1/2 Collector
    Dynatech Headers: Pierce, Spread Port, 1-3/4 - 1-7/8, 3-1/2 Collector
    x
                
    • Stepped Tube Design
    • For Spread Port applications
    • Fits angles or straight plug heads
    • Gaskets, bolts and hardware included

    Header Dimension Chart

  • Dynatech   780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    Dynatech 780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech   780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    Dynatech 780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech   701-10010 Chevy Chassis Header
    $202.99
    $215.99
    Product Rating: 5.00 Stars
    Dynatech 701-10010 Chevy Chassis Header
    x
                
    • Fits older Bullitt, GRT, Howe, NASCAR LMS, Shaw, and most IMCA Modifieds
    • Fits angle or straight plug heads
    • For Standard Chevy or Crate Engine applications
    • Gaskets, bolts and hardware included

    Note: Number 1 spark plug should be at least 1" behind ball joint.

    Header Dimension Chart

  • Dynatech   780-02518 Plain Steel Merge Collector, 2-1/4 x 4 Inch
    Dynatech 780-02518 Plain Steel Merge Collector, 2-1/4 x 4 Inch
    x
                

    Dynatech® Mild Steel Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Formed long transition 4-into-1 design for maximum power
    • Jig-located U-tabs at 180 degrees for bolt-on mounting
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Left Side Crash Replacement IMCA Mod. Header, 1-5/8 Inch, Small Block Chevy
    Left Side Crash Replacement IMCA Mod. Header, 1-5/8 Inch, Small Block Chevy
    x
                

    Left hand side crash replacement headers for IMCA Modified design.

    Tube Size: 1.625"

    Application: Small Block Chevy

  • LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    x
                

    Many rodders are looking to install Chevy’s powerful and efficient LS1 / LS6 Small Block V8 in their street rods, customs and classic trucks. These shorty headers can make those installations easier in a variety of applications, and help produce more power as well.

    An oxygen sensor bung is included with these block hugger headers, but not installed, for those who want to keep the engine’s electronic fuel injection. Includes bolts, gaskets, and reducers.

    LS1 Header Dimensions (GIF)

  • Right Crash Replacement IMCA Mod. Header, 1-3/4 In., Small Block Chevy
    Right Crash Replacement IMCA Mod. Header, 1-3/4 In., Small Block Chevy
    x
                

    Right hand side crash replacement headers for Modified design for GRT, Kosiski, Smileys and TRE.

    Tube Size: 1.75"

    Application: Small Block Chevy  

Goto Previous PagePrevious Page
1 2 3 4 5 ... 15