Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Engines At Speedway Motors

Speedway Motors is the circle track engine authority! Whether you have a Ford or Chevy race motor, Speedway has the engine parts you need at the best prices around. Our large assortment of iron cylinder heads, performance camshafts and racing valve train components allows you to tailor your engine to any racing condition. Speedway also has a variety of durable claimer engine kits, oil pumps and oil pans to help keep costs down without sacrificing performance or reliability.

Featured Products
Enginequest IMCA/WISSOTA Small Block Chevy Cylinder Heads
Enginequest IMCA/WISSOTA Small Block Chevy Cylinder Heads
x
            This head is engraved and serial numbered by  Engine Quest for IMCA's Sport Mods, Stock Cars, and Hobby Stocks. Now  approved for WISSOTA Midwest Mods and Street Stocks.

Assembled heads will include the following:
  • 3/8" screw in studs # 915-99156
  • 76 cc combustion chamber
  • 176-178 cc intake runners
  • Straight plug
  • 1.94/1.50 intake/exhaust valves #910-14140-1 & 910-14145-1
  • Available bare or assembled and blue printed
  • Heavy duty valves
  • Retainers and locks # 915-39741 & 577-555
  • 1.25" high-performance valve springs # 180-671515
  • Three angle valve job


Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
x
            
Competitive and durable racing power at an economical price!
 
Designed for circle track's weekend warriors, this bullet-proof 350-horsepower, 350-cubic-inch factory-sealed racing engine is a tough combination of power and reliability –and it fits almost any racing budget.
 
Based on GM Performance Parts' popular 350 HO engine, including a brand-new, four-bolt-main block, 9:1 hypereutectic pistons, cast iron crankshaft and GM iron Vortec cylinder heads, the 350/350 Factory Stock version features a high-rise dual-plane intake manifold, 8-quart single kick-out circle track oil pan, valve cover kit with breather tube and breather, and special "kool nut" rocker arm nut design.  The 350 HO's unique dual-pattern cam is included, too. It's based on the one found in 1965-67 Corvette 327 engines, but with more lift and duration to clear the engine exhaust quickly and move in more air –providing excellent mid- and high-range power, where you need it on the track.
 
Delivered complete from the oil pan to the intake manifold –including an HEI distributor –the 350/350 racing engine has the proven parts and horsepower to enable a competitive racecar. Getting it into the winner's circle, however, is your job!
  • Track-tested durability
  • Great mid-range power
  • Best horsepower value around
  • Factory-sealed for equal competition

Specifications:

  • 350 HP @ 5000 RPM, 390 ft. lbs. of torque @ 3800 RPM
  • Bore x Stroke: 4.00” x 3.48”
  • Compression Ratio: 9.1:1
  • 92 Octane recommended fuel
  • Cast Iron, 4-bolt main caps
  • Cam Lift: .435” Intake / .460” exhaust
  • Cam Duration @ .050”: 212 deg. Intake / 222 deg. Exhaust
  • Lobe Separation: 112.5 Degree
  • .194” Intake/ 1.50” Exhaust valves
  • Stamped Steel, 1.5:1 Ratio rocker arms
Includes:
  • Fully GM assembled long block
  • Steel Valve Cover with Chevy Bowtie Logo Breathers
  • High Rise Aluminum Intake Manifold
  • HEI Distributor
  • 8” Harmonic Balancer
  • Oil pump, pick-up and 8 quart oil pan
  • Front timing cover
GM Performance Parts Racing Crate Engines are excluded from the limited warranty.
 
*Check track rules for correct application.
GM Performance IMCA Sealed CT 350 602 Crate Engine, IMCA Approved
GM Performance IMCA Sealed CT 350 602 Crate Engine, IMCA Approved
x
            
Competitive and durable racing power at an economical price!
 
Designed for circle track's weekend warriors, this bullet-proof 350-horsepower, 350-cubic-inch factory-sealed racing engine is a tough combination of power and reliability –and it fits almost any racing budget.
 
Based on GM Performance Parts' popular 350 HO engine, including a brand-new, four-bolt-main block, 9:1 hypereutectic pistons, cast iron crankshaft and GM iron Vortec cylinder heads, the 350/350 Factory Stock version features a high-rise dual-plane intake manifold, 8-quart single kick-out circle track oil pan, valve cover kit with breather tube and breather, and special "kool nut" rocker arm nut design.  The 350 HO's unique dual-pattern cam is included, too. It's based on the one found in 1965-67 Corvette 327 engines, but with more lift and duration to clear the engine exhaust quickly and move in more air –providing excellent mid- and high-range power, where you need it on the track.
 
Delivered complete from the oil pan to the intake manifold –including an HEI distributor –the 350/350 racing engine has the proven parts and horsepower to enable a competitive racecar. Getting it into the winner's circle, however, is your job!
  • Track-tested durability
  • Great mid-range power
  • Best horsepower value around
  • Factory-sealed for equal competition

Specifications:

  • 350 HP @ 5000 RPM, 390 ft. lbs. of torque @ 3800 RPM
  • Bore x Stroke: 4.00” x 3.48”
  • Compression Ratio: 9.1:1
  • 92 Octane recommended fuel
  • Cast Iron, 4-bolt main caps
  • Cam Lift: .435” Intake / .460” exhaust
  • Cam Duration @ .050”: 212 deg. Intake / 222 deg. Exhaust
  • Lobe Separation: 112.5 Degree
  • .194” Intake/ 1.50” Exhaust valves
  • Stamped Steel, 1.5:1 Ratio rocker arms
Includes:
  • Fully GM assembled long block
  • Steel Valve Cover with Chevy Bowtie Logo Breathers
  • High Rise Aluminum Intake Manifold
  • HEI Distributor
  • 8” Harmonic Balancer
  • Oil pump, pick-up and 8 quart oil pan
  • Front timing cover
GM Performance Parts Racing Crate Engines are excluded from the limited warranty.
 
Note: Comes sealed with IMCA issued bolts and is approved for use in IMCA
 
*Check track rules for correct application.
GM Performance 19318604 Sealed CT 400 604 Crate Engine, IMCA Approved
GM Performance 19318604 Sealed CT 400 604 Crate Engine, IMCA Approved
x
            
Run up front with our race-winning 400-horsepower 350 with Fast Burn heads!
 
GM Performance Part's Fast Burn cylinder heads are the fast way to the winner's circle –and they're standard on the 350/400 Late Model GM racing engine from GM Performance Parts.
 
This brand-new, factory-sealed racing engine is based on the popular Fast Burn 385-horsepower street crate engine, but includes a racing-only 8-quart circle track oil pan, with dual kick-out design, along with a valve cover breather kit and special "kool nut" rocker arm design. The assembly also includes an open-plenum high-rise intake manifold and 1.5:1-ratio aluminum roller rockers.
 
Because it's based on the 350 Fast Burn engine, the 350/400 racing engine includes a bulletproof bottom end, anchored by a forged steel crankshaft and hypereutectic pistons. The 23-degree, Fast Burn aluminum heads enable tremendous power in the small-block V-8 because of a unique chamber design that quickly and completely burns all of the air/fuel mixture –giving you maximum power all the time.
 
With the 350/400 racing engine under the hood of your Late Model, you'll put a "fast burn" on the competition.
  • Formerly sold as GM Performance 91088958604 IMCA 604 Crate Engine
  • High-revving matched components
  • A fraction of the price of a custom engine!
  • Factory-sealed for equal competition
  • 400 HP @ 5500 RPM
  • 400 ft. lbs. of torque @ 4500 RPM
  • 4.00" x 3.48" bore x stroke
  • 9.6:1 compression ratio
  • 92 Octane recommended fuel
  • 4-bolt main caps
  • Cam lift: .474" intake / .510" exhaust
  • Cam duration @ .050": 208° intake / 221° exhaust
  • 112° lobe separation
  • 1.5:1 ratio stamped rocker arms

Includes:

  • Fully assembled long block
  • Black steel valve covers w/ breathers
  • Oil pump, pick-up, 8 quart oil pan
  • Eliminator Vortec intake manifold
  • Spark plugs
  • 8" harmonic balancer
  • Front timing cover
GM Performance Parts Racing Crate Engines are excluded from the limited warranty.
 
Note: Comes sealed with IMCA issued bolts and is approved for use in IMCA
 
*Check track rules for correct application.

"Oval Track, Engine" Page 1 of 25

  • King HP Series 1969-Up Small Block Chevy Rod Bearings
    King HP Series 1969-Up Small Block Chevy Rod Bearings
    x
                
    • Bi-metal aluminum silicon alloy featuring fine micro-bore finish
    • Mains and rods are narrowed for large radius crankshafts
    • Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
    • 0.015" thick top layer for superior macro particle embedability and conformability
    • 40 Vickers hardness to resist overlay migration and extrusion
    • 450°F heat threshold for superior protection against friction and overheating
  • Small Block Chevy Valve Cover Gaskets, Vortec Heads
    Small Block Chevy Valve Cover Gaskets, Vortec Heads
    x
                

    Rubber valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC) with vortec heads.

  • Rocker Arm Balls for 7/16 Inch Stud
    Rocker Arm Balls for 7/16 Inch Stud
    x
                Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
            
  • COMP Cams 19044-16 Ultra-Gold    ARC Series Alum. Rocker Arms, Ford 7/16-1.6
    COMP Cams 19044-16 Ultra-Gold ARC Series Alum. Rocker Arms, Ford 7/16-1.6
    x
                Please view the product's page for more information
            
  • COMP Cams 750-16 Steel Valve Spring Retainers, 1.250 Inch OD, Set/16
    COMP Cams 750-16 Steel Valve Spring Retainers, 1.250 Inch OD, Set/16
    x
                Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP ® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP ® retainers use only high-grade SAE 4140 chromemoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. COMP Cams ® Steel Valve Spring Retainers offer both unmatched looks and superior performance that set the industry standard. 
    • Includes 16 Retainers
    • Super Lock™ Retainers
    • 10° Lock Angle - All Valve Stem Sizes - 1.250" Spring Diameter
    • 1.250 in. Outside Diameter
    • .735 in. Inside Diameter

     

  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • OTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevy
    OTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevy
    x
                OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

    OTR oil filters have:
    • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
    • Non stick gaskets made from a proprietary synthetic rubber compound.
    • Burst strength of 600 P.S.I.! OTR's spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
    • Ability to trap particles down to 30 micron or less!
    • Heaviest case and base plate in motorsports!
    • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in unfiltered oil flowing to your engine.   
    • 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off..
  • COMP Cams 1631-16 Ultra Pro Magnum    Roller Rocker Arms, Ford 3/8 - 1.6
    COMP Cams 1631-16 Ultra Pro Magnum Roller Rocker Arms, Ford 3/8 - 1.6
    x
                Please view the product's page for more information
            
  • Fram HP4 High Performance Racing Oil Filter, Chevy
    Fram HP4 High Performance Racing Oil Filter, Chevy
    x
                

    Fram Racing oil filters have a heavy-duty steel body construction to resist high pressure surges and external impact. Rated at 10 GPM with a maximum 200 psi operating pressure.

    The HP4 is the common Chevy replacement and will work with both our remote oil filter brackets and be a stock OEM filter replacement for Chevy applications.

    • 13/16"-16 thread pitch
    • Low-restriction racing media designed for high oil flow
    • Spiral-shaped center tube to provide protection against collapse
    • Heavy gauge steel tapping plate to withstand high pressure flexing
    • Screen-over bypass valve to provide additional protection against larger contaminants
    • Relief valve developed uniquely for high oil flow racing conditions
  • COMP Cams 741-16 Steel Retainers, 1.55 Inch, 10 Degree
    COMP Cams 741-16 Steel Retainers, 1.55 Inch, 10 Degree
    x
                

    Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP® retainers use only high-grade SAE 4140 chromemoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. COMP Cams® Steel Valve Spring Retainers offer both unmatched looks and superior performance that set the industry standard.

    • Includes 16 Retainers
    • Super Lock™ Retainers
    • 10° Lock Angle - All Valve Stem Sizes - 1.500" -1.550" Spring Diameter
  • COMP Cams 84000-16 Chevy Race Hydraulic Lifters
    COMP Cams 84000-16 Chevy Race Hydraulic Lifters
    x
                

    As the best all-around high performance hydraulic flat tappet lifter, Race Hydraulic Lifters from COMP Cams are designed to stand up to the abuse of racing. They feature tighter plunger to body tolerances and super strict tolerances for the mechanical internals. With premium one-piece pushrod seats, heavy-duty snap rings and a lubrited cam face, Race Hydraulic Lifters offer superior performance and durability.

    • Tighter plunger to body tolerances and premium one-piece pushrod seats
    • Super strict tolerances for the mechanical internals optimize performance
    • Extra heavy-duty snap ring design increases lifter strength and durability
  • Extra Long Slot Small Block Chevy Steel Rocker Arms, 1.6:1
    Extra Long Slot Small Block Chevy Steel Rocker Arms, 1.6:1
    x
                Extra long slot steel rocker arms for small block Chevy with high lift aftermarket camshaft. Higher 1.6:1 ratio provides more valve lift than stock 1.5:1 ratio arms. Balls and nuts not included. Set of 16.
            
  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • Champ Pans CP40RB 1986-Up S/B Chevy Stock Appearing Oil Pan, 1-Piece
    Champ Pans CP40RB 1986-Up S/B Chevy Stock Appearing Oil Pan, 1-Piece
    x
                This stock appearing street oil pan features a 7-1/2" deep rear sump and has one 6" trapdoor, one crank scraper, and a removable horsepower saving windage tray. The oil capacity is 5 quarts with a filter attached.
            
  • Speedway Plasma Moly Piston Rings, 4.00 Bore, Style D
    Speedway Plasma Moly Piston Rings, 4.00 Bore, Style D
    x
                

    Speedway premium Plasma Moly piston rings work with either gas or alcohol fuels, handle 8000+ rpm, and up to 14:1 compression.

    Ring Style Chart (GIF)

  • Small Block Chevy Steel Side Engine Mount Kit
    Small Block Chevy Steel Side Engine Mount Kit
    x
                

    Use these universal small block Chevy engine mounts to fit your high-horsepower motor to the desired chassis of your choice.  They are constructed of beefy .18" thick steel for safety and performance.

    • Small Block Chevy applications
    • Universal chassis applications
    • Sturdy steel construction
    • Hardware included
  • Speedway Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM
    Speedway Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM
    x
                Speedway Tight Lash cams produce a broad range of power due to the short amount of cam degrees it takes to go from .020" lift to .050" cam lift. This is known as major intensity. The shorter the span the more torque the lobe will produce, and for the lobe to run excellent up at higher RPM, it must have an excellent area under the curve. You can tell these do because of the very high duration at .200" cam lift. 

    Compare our numbers to other cam profiles and you will find that these are far superior!

    Cam Card - 91515001 (PDF)

    Cam Application Chart (GIF)

    915-15001 Instructions (PDF)

  • COMP Cams 4512-16 Hi-Tech Race Rocker Studs, Big Block Chevy
    COMP Cams 4512-16 Hi-Tech Race Rocker Studs, Big Block Chevy
    x
                

    COMP Cams® takes pride in having the finest rocker arm studs available on the market. The High Energy™ and Magnum series studs work well in applications with moderate lifts and spring pressures and are available in the popular 3/8” and 7/16” sizes. When ultimate strength is required as with high rpm roller cam applications, the Hi-Tech™ Race Stud is the answer. This stud has a thin jam nut for rocker clearance, rolled threads for maximum contact and a ground-flat top so accurate valve adjustment can be achieved and maintained. The diameter of the jam nut is larger in order to spread the load over a larger area. All COMP Cams® studs have generous radii and a black oxide finish.

    • Set of 16
    • 7/16  Inch Diameter
    • Designed for ultimate strength and locking force
    • High Energy™ and Magnum polylocks are best for moderate lift and spring pressure applications
    • Hi-Tech™ Polylocks work well in all high end race applications
    • The stud girdle polylocks are precision ground for minimum runout and tapered for extra strength in the locking area
  • Scat 350-4000-6000-21LW F43 Chevy Crankshaft 4 Stroke 350 Main 2.1 Rod
    Scat 350-4000-6000-21LW F43 Chevy Crankshaft 4 Stroke 350 Main 2.1 Rod
    x
                

    Lightweight, strong and at a price you can afford. These 4340 forged steel cranks will really make a difference in your performance.

    • Fits small block Chevy with 2-piece rear main seal
    • Straight shot & chamfered oil holes
    • Nitride hardened for superior wear resistance
    • Profiled and pendulum cut counterweights
    • Gun-drilled main line hole for lightening and equalization of crankcase pressure
    • Star tail for reduced weight
  • COMP Cams 4505-16 Hi-Tech Race Rocker Studs, 3/8 Inch Diameter
    COMP Cams 4505-16 Hi-Tech Race Rocker Studs, 3/8 Inch Diameter
    x
                

    COMP Cams® takes pride in having the finest rocker arm studs available on the market. The High Energy™ and Magnum series studs work well in applications with moderate lifts and spring pressures and are available in the popular 3/8” and 7/16” sizes. When ultimate strength is required as with high rpm roller cam applications, the Hi-Tech™ Race Stud is the answer. This stud has a thin jam nut for rocker clearance, rolled threads for maximum contact and a ground-flat top so accurate valve adjustment can be achieved and maintained. The diameter of the jam nut is larger in order to spread the load over a larger area. All COMP Cams® studs have generous radii and a black oxide finish.

    • Set of 16
    • 3/8" Stud Diameter
    • Designed for ultimate strength and locking force
    • High Energy™ and Magnum polylocks are best for moderate lift and spring pressure applications
    • Hi-Tech™ Polylocks work well in all high end race applications
    • The stud girdle polylocks are precision ground for minimum runout and tapered for extra strength in the locking area 
  • 1980-'85 Small Block Chevy Raw Oil Pan, Right Side Dipstick
    1980-'85 Small Block Chevy Raw Oil Pan, Right Side Dipstick
    x
                1980-'85 small block chevy raw oil pan with right hand side dipstick.
            
  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/302 Small Block Chevy 400
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/302 Small Block Chevy 400
    x
                

    These camshaft / lifter kits are perfect for use with SBC 400 to 427 CID Air Flow Research 220-235 heads. Max power 6300 rpm, Peak torque 3500. This cam was designed for 1.6 ratio rockers to be used with the AFR heads. The increase lifter velocity maximizes the fill rate of these heads on large stroke engines from 3.75 to 4.00". The cam will maximize RAM Effect and fill cylinder for increase VE. Use of 1.750" on engines up to 412CID and 1.875" on engines over 412CID is highly recommended. We recommend a 3200 stall, a 850CFM carb, and a minimum of 10:1 compression.

    • Adv. - 296 / 302
    • .050" - 237 / 243
    • .100" - 206 / 212
    • .200" - 155 / 158
    • .300" - 96 / 92
    • Lift - .584 / .565
    • Centerlines - 104 / 112
    • Lobe Sep. - 108
    • Includes a set of tie-bar style hydraulic roller lifters
  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 6 Inch Rod
    MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 6 Inch Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).

    • Comp Height 6.0" Rod:  1.250
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465

    PowerPak Piston Chart Application (GIF)

  • Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

    Choose from standard, .030, or .040 oversize.

    NOTE: These rotating assemblies may require additional charges for heavy metal.

     


  • Small Block 350 Chevy Rotating Assem., One Piece, Flat Top-4 Valve, 5.7 Rod
    Small Block 350 Chevy Rotating Assem., One Piece, Flat Top-4 Valve, 5.7 Rod
    x
                

    Speedway introduces forged rotating assembly engine rebuild kits, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    New one piece rear main cast steel crank. Standard size journals. Hyperuetectic piston set and Speedway Super Stock rods. ARP rod bolts.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours.

    NOTE: Piston rings are not included and must be purchased separately.
  • KB Chevy 350 Hypereutectic Pistons, Dish, 5.7 Rod
    KB Chevy 350 Hypereutectic Pistons, Dish, 5.7 Rod
    x
                

    Keith Black Hyperutectic pistons are favored for their improved power and reduced scuffing. The unique design & manufacturing processes combine to produce a rigid piston, which will rock less in the bore improving ring seal. These T-5 heat treated pistons also offer reduced thermal expansion, which allows you to run tighter clearances and allows the piston rings to seal better and minimize blow-by.

    For S/B Chevy 350 c.i. (4.000" bore x 3.48" stroke).

    • 390 Hypereutectic alloy
    • Fully machined crowns and valve reliefs
    • Drilled oil drain backs
    • Full floating wrist pins
    • Triple wound spiral locks
    • Reflective alloy allows 2% power increase
    • Quench dome technology minimizes deterioration
    • Zero deck quench designs
    • Lightweight wrist pins

    Ring Style Chart (GIF)

    474-193 Instructions (PDF)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/300 Big Block Chevy 496
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/300 Big Block Chevy 496
    x
                

    These camshaft / lifter kits are perfect for use with BBC 477 to 496 with 4.25" stroke with Air Flow Research 290 or 305 heads to a max of 6000 rpm. Welcome to the brotherhood of 625HP on pump gas with over 640#/ft. This cam will produce over 600HP with a single plane and right at 600HP with an air-gap intake. Single plane will make 25 more HP and sacrifice 10#/ft. of torque. Carb of choice is a 950HP 4150. 2" headers are recommended. Be sure you have changed U-joints and upgraded rear gears. Muncie 4 speed, use at your own risk. Ok with power brakes. 900 RPM Idle.

    • Adv. - 296 / 300
    • .050" - 237 / 241
    • .200" - 154 / 151
    • Lift - .617 / .570
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    x
                

    These universal oil filter adapters come with 6 different thread size adapters to make installation easy on a variety of applications. They are designed to be mounted between the engine block and oil filter to route oil to a remote oil cooler.

    • 3/8 NPT ports
    • Special thread adapters cover 90% of engines
    • Die cast aluminum
    • Add an oil cooler and remote filter

    Oil Filter Adapter 195 Installation Instructions (PDF)

     

  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • J-B Weld 8276 Kwik Epoxy Putty
    J-B Weld 8276 Kwik Epoxy Putty
    x
                

    J-B Weld is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. The Kwik Weld formula, which when mixed in equal parts, sets in 4 minutes. JB Weld bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper - just about any porous and non-porous material. When cured, you can drill it, tap it, and machine it.

    • Gasoline, petroleum, chemical, and acid resistant
    • Waterproof
    • Sets in 4 minutes, fully cures in 4 hours
    • Withstands temperatures up to 300° F
  • Speedway Ford 351W Solid Lifter Cam, 3000-6750 RPM
    Speedway Ford 351W Solid Lifter Cam, 3000-6750 RPM
    x
                

    Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested! Cam can also be used in 289/302 engines if ignition firing order is changed to 351W: (1-3-7-2-6-5-4-8).

    Must be used with a break-in oil additive (sold separately).

    Cam Card - 91555011 (PDF) 

    351W Cam Application Chart (GIF)

    915-55011 Instructions (PDF)

  • Moose Blocks 2017 Engine Heater Hose Bracket     1/2 NPT Universal Mount
    Moose Blocks 2017 Engine Heater Hose Bracket 1/2 NPT Universal Mount
    x
                These hot set up blocks from Moose Blocks feature an anodized aluminum black finish and 1/2" NPT thread pitch.
    • 1/4" bolt hole in the center for universal mounting
    • 1/2" NPT threads
  • Scat 4-400-4000-6000 434 Chevy 4340 Forged Crankshaft, 4.00 Stroke
    Scat 4-400-4000-6000 434 Chevy 4340 Forged Crankshaft, 4.00 Stroke
    x
                

    As you make more and more power it becomes more important to use quality parts. These Scat 4340 forged steel cranks will help keep your motor alive.

    • Straight shot & chamfered oil holes
    • Nitride hardened for superior wear reisistance
    • Lightening holes in all rod throws
    • Large radius on all journals
    • Heat treated, shot peened
    • Designed at SCAT
    • Engineered at SCAT
    • Inspected & micropolished at SCAT
    • For 2-piece rear main blocks
    • 2.100" rod pin
    • 55 lbs.
  • COMP Cams 4506-16 Hi-Tech Race Rocker Studs, 7/16 Inch Diameter
    COMP Cams 4506-16 Hi-Tech Race Rocker Studs, 7/16 Inch Diameter
    x
                

    COMP Cams® takes pride in having the finest rocker arm studs available on the market. The High Energy™ and Magnum series studs work well in applications with moderate lifts and spring pressures and are available in the popular 3/8” and 7/16” sizes. When ultimate strength is required as with high rpm roller cam applications, the Hi-Tech™ Race Stud is the answer. This stud has a thin jam nut for rocker clearance, rolled threads for maximum contact and a ground-flat top so accurate valve adjustment can be achieved and maintained. The diameter of the jam nut is larger in order to spread the load over a larger area. All COMP Cams® studs have generous radii and a black oxide finish.

    • Set of 16
    • 7/16 Inch Stud Diameter
    • Designed for ultimate strength and locking force
    • High Energy™ and Magnum polylocks are best for moderate lift and spring pressure applications
    • Hi-Tech™ Polylocks work well in all high end race applications
    • The stud girdle polylocks are precision ground for minimum runout and tapered for extra strength in the locking area
  • SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Chevrolet Style Motor Mount Bolt Kit
    $4.99
    $8.00
    Chevrolet Style Motor Mount Bolt Kit
    x
                

    These quality engine mount bolt kits are designed for use with Small Block and Big Block Chevy style motor mounts.  They feature a zinc coating with solid steel construction and come with all necessary bolts needed for a successful installation.

    • For SBC and BBC motor mounts
    • Zinc finish, steel construction
    • 3/8"-16 thread
    • Sold as a kit
  • KSE Racing Products KSD1013 Lexan Timing Window Cover
    KSE Racing Products KSD1013 Lexan Timing Window Cover
    x
                

    Lexan timing window cover for KSE front pumps.

  • Clay Smith Hydraulic Roller Cam / Lifter, 284/286 Big Block Chevy 454
    Clay Smith Hydraulic Roller Cam / Lifter, 284/286 Big Block Chevy 454
    x
                

    These camshaft / lifter kits are perfect for use with BBC 454 to 470 CID with Air Flow Research 265 or 290 Oval Port heads to max of 6000 rpm. If you have built your teenage dream car and put AFR oval ports on it than there is no doubt this is the cam for you. We recommend a high rise dual plane with the center notched. An 850HP carb would be our choice with a good set of 13/4" headers. Don't worry about gear ratio, it will pull anything you put under it. Great with power brakes. Buy stock in tires. 750 RPM Idle.

    • Adv. - 284 / 286
    • .050" - 225 / 227
    • .200" - 137 / 136
    • Lift - .559 / .530
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • AFCO 80652 Chevy Engine Mounts, Rear
    AFCO 80652 Chevy Engine Mounts, Rear
    x
                AFCO Rear Chevy Engine Mounts
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25