Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 8

Products

Electrical, Lighting and Body

Shop Oval Track Electric Switches & Connectors At Speedway Motors

Find all your race car switch panels, warning lights and wiring accessories at Speedway Motors - America's Racing Super Market. Speedway Motors stocks many of the most dependable brands in the racing industry, including AFCO, Longacre and Painless Wiring. Shop now for same day shipping on these oval track racing electrical components!

Featured Products
  • MSD 8910 Tach Adapter
    $50.99
    MSD 8910 Tach Adapter
    (Part #5478910)
    x
                If, after installing an MSD Ignition Control, your ta­chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap­plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Performance Distributors 111111 Battery and Tachometer Connector
      Performance Distributors 111111 Battery and Tachometer Connector
      (Part #91013201)
      x
                  

      These plastic insulators and brass terminals make your power supply connection and tach connection to the DUI Distributor super easy! They plug directly into the cap and coil assembly and the locking tabs prevent lost connections due to vibration. The Battery and Tachometer Connectors are priced separately so one of each will be needed for the hot wire and tach hookup.

    • Painless Wiring 70402 Two Wire Weatherpack Connectors
      Painless Wiring 70402 Two Wire Weatherpack Connectors
      (Part #91012212)
      x
                  

      A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

    • Electrical 4 Terminal Block Strip
      $4.99
      $5.99
      Product Rating: 4.00 Stars
      Electrical 4 Terminal Block Strip
      (Part #91064005)
      x
                  

      Connect all the wires in your panel or enclosure in one convenient place. Also known as barrier terminal strips, these blocks have screw terminals—just loosen a screw and wrap a stripped wire end around it (or use a spade terminal) and tighten the screw. All have four mounting holes. Color is black. UL recognized and CSA certified.

      • Phenolic block 
      • Tin-plated brass terminals
      • Ni-plated steel screws
      • Amps Per Circuit: 20A
      • For Wire Size, AWG: 22-12
      • Screw Terminal Size: #6-32
      • Center-to-Center:  0.38"
      • Mount Hole Diameter:  0.17"

      Note: These are terminal strips and are NOT intended for use as ground strips. To be used as a ground strip, all terminals on one side would need to be pigtailed together.

    • Lokar 1110104 Dial-In Board 1-1/2 Inch Cage Mount - Polished
      Lokar 1110104 Dial-In Board 1-1/2 Inch Cage Mount - Polished
      (Part #4911110104)
      x
                  

      This polished 3-digit dial-in board from Lokar comes with a bracket. It is designed to fit 1-1/2" diameter tubes.

      • Adjustable arm for leveling
      • No welding or drilling required
      • No interference with roll-bar padding
      • 6061 T-6 Aluminum
      • Made in the USA
    • AFCO 85190 Warning Light Kit, Oil Pressure
      AFCO 85190 Warning Light Kit, Oil Pressure
      (Part #10685190)
      x
                  

      These units allow the driver to maintain focus on the race.

      Wiring Instructions (PDF)

    • Standard 3/4 Inch Warning Light Only
      Standard 3/4 Inch Warning Light Only
      (Part #60450)
      x
                  Shows problem before it becomes a hazard with these easy to install and easy to see 3/4" LED replacement lights.  The housing is 1.0195" at the widest.
              
    • Auto Meter 5289 GPS Sending Module-Universal for Electric Speedometers
      Auto Meter 5289 GPS Sending Module-Universal for Electric Speedometers
      (Part #1825289)
      x
                  

      This unit allows nearly any electric speedometer to use free GPS signals to drive the speedometer. No more cables, no more calibration drives. If you've got an Auto Meter electronic speedometer, it's a plug and play solution. Calibration on non-Auto Meter speedometers takes about 10 seconds and doesn't require driving. The Module uses the fastest possible GPS technology for truly seamless functionality.

      • Lightning fast 10Hz Signal
      • Separate paintable 1" square antenna with optional magnetic attachment capability
      • Waterproof antenna and module assembly (IP67 sealed)
      • Factory calibrated for 16,000 pulses per mile
      • One touch calibration
      • Compatible with Electronic Speedometers Only

    Filter

    "Oval Track, Electrical, Lighting and Body" Page 1 of 8

    Page 1 of 8

    • AFCO 85053B Starter Switch Panel with Lights, 4-1/8 x 5-7/8 Inch
      AFCO 85053B Starter Switch Panel with Lights, 4-1/8 x 5-7/8 Inch
      (Part #10685053B)
      x
                  

      AFCO starter switch panels are for standard ignitions.

      Wiring Instructions (PDF)

    • Longacre 44863 Aluminum Flip-Up Ignition Start Panel w/ Pilot Light
      New
      Longacre 44863 Aluminum Flip-Up Ignition Start Panel w/ Pilot Light
      (Part #47544863)
      x
                  

      Longacre Aluminum Flip-Up Ignition Start Panel includes both aircraft style flip-up and silicone rubber weatherproof ignition switch covers. The panel comes pre-wired for making for an easy installation process. Can be mounted to dash or mounted to roll bar with mounting brackets.

      • 40 amp at 12 volts ignition switch with aircraft style cover and pilot light
      • Silicone rubber weatherproof ignition switch cover included
      • Starter button with weatherproof cover
      • Aluminum construction
      • Black anodized finish with clean, modern graphics
      • Pre-wired with high insulation "Fat" wires and soldered terminals with heat shrink connections
      For more information check out switch panel wiring instructions
    • AFCO 85293 Warning Light, Oil Temp.
      AFCO 85293 Warning Light, Oil Temp.
      (Part #10685293)
      x
                  

      These lights allow the driver to maintain focus on the race.

      Wiring Instructions (PDF)

    • MSD 8183 2-Pin Deutsch Connector, 16 gauge
      MSD 8183 2-Pin Deutsch Connector, 16 gauge
      (Part #5478183)
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

    • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      (Part #91050302)
      x
                  

      This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

      Installation Instructions (PDF) 

      The Kit Controls:

      • Start
      • Ignition
      • Fuel pump
      • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
      • Two accessories

       

       

    • MSD 8961 MSD High Current Relay, SPST
      MSD 8961 MSD High Current Relay, SPST
      (Part #5478961)
      x
                  MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

      Installation Instructions (PDF)

    • MSD 8190 10 Male Pins and Seals
      MSD 8190 10 Male Pins and Seals
      (Part #5478190)
      x
                  Male pins and seals for use with Weathertight Connectors.
              
    • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
      MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
      (Part #5478187)
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

      • Sealed Connectors
    • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
      MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
      (Part #5478184)
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

      • Waterproof
      • Quick Connect
    • MSD 8910 Tach Adapter
      $50.99
      MSD 8910 Tach Adapter
      (Part #5478910)
      x
                  If, after installing an MSD Ignition Control, your ta­chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap­plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

      Installation Instructions (PDF)

      Installation Instructions (PDF)

      • Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
        Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
        (Part #47544611)
        x
                    These high capacity (40 amp at 12 volts) ignition switch panels with aircraft style cover and pilot light are easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration. They come pre-wired with high insulation "Fat" wires and soldered terminals with heat shrinked seals.
        • Starter button with weatherproof cover
        • Lightweight aluminum panel
        • Plugs into Longacre wiring harness P/N 44930
        • Ignition Switch:
          • Style:    Toggle
          • Cover:    Aircraft style flip
          • Pilot Light Included:   Yes
          • Rating:    40 amps @ 12 volts
        • Starter Switch:
          • Style:    Push button
          • Cover:    Weatherproof rubber
          • Rating:    15 amps @ 12 volts resistive
        • Panel:
          • Material:    Lightweight aluminum
          • Panel Dimensions:   3-1/2" x 3-1/2"
          • Wiring Included:    Yes
      • Toggle Ignition On Switch
        $9.99
        Product Rating: 4.75 Stars
        Toggle Ignition On Switch
        (Part #91364380)
        x
                    Toggle switch works great as a kill switch or with other auxiliary equipment. 25 amp SPST switch with rubber boot and on/off plate.
                
      • Safety Kill Switch
        $19.99
        Product Rating: 4.50 Stars
        Safety Kill Switch
        (Part #91364384)
        x
                    

        This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

        20 amp rating at 12 VDC.

      • MSD 8180 6- Pin Deutsch Connector, 16 gauge
        MSD 8180 6- Pin Deutsch Connector, 16 gauge
        (Part #5478180)
        x
                    There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

        Installation Instructions (PDF)

        • Waterproof
        • Heat Shrinkable
        • Battery Quick Disconnects
        • Special Tools
        • Perma-Seal
        • Weather Pack
        • Deutsch
        • Quick Connect
      • MSD 8956 Window RPM Activated Switch
        $95.99
        $112.99
        MSD 8956 Window RPM Activated Switch
        (Part #5478956)
        x
                    These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown here. For use on 4, 6, or 8-cylinder engines.

        Installation Instructions (PDF)

        • 2 RPM Adjustments
        • Activate a circuit
        • Deactivate a circuit
      • MSD 8920 Tach Adapter, Magnetic Trigger
        $65.99
        $77.99
        MSD 8920 Tach Adapter, Magnetic Trigger
        (Part #5478920)
        x
                    If, after installing an MSD Ignition Control, your ta­chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap­plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are using the magnetic pick-up input (green and violet wires) to trigger your MSD Ignition, you will need the PN 8920 Tach Adapter. The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).

        Installation Instructions (PDF)

        • If you are connecting a tachometer to an MSD Ignition, or your application is equipped with electronic fuel injection then you may need to use this Tach/Fuel Injection Adapter to ensure correct operation. This Adapter will correct the operation of most tachometers and fuel injection pump relays that do not work directly off of the MSD Ignitions 12 volt square wave tach output terminal.
      • Painless Wiring 70402 Two Wire Weatherpack Connectors
        Painless Wiring 70402 Two Wire Weatherpack Connectors
        (Part #91012212)
        x
                    

        A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

      • MSD 8812 Universal, Push Button, Alt. Action Switch
        MSD 8812 Universal, Push Button, Alt. Action Switch
        (Part #5478812)
        x
                    This switch is designed to be used as an auxiliary ignition On/Off but­ton. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. Assembled and constructed for harsh racing conditions.

        Installation Instructions (PDF)

        • Speedway Starter Switch Panel
          Speedway Starter Switch Panel
          (Part #91364385)
          x
                      

          Start your engine by flicking a switch and depressing a starter button. This starter switch panel is designed to stand up to rough racing conditions and is fully waterproof.

          • Panel measures 2-5/8" x 4-1/2"
          • Includes three 14 gauge wires (5 ft. each)

          913-64385 Instructions (PDF)

        • Keep It Clean Switch Panel
          $74.99
          Product Rating: 5.00 Stars
          Keep It Clean Switch Panel
          (Part #91029085)
          x
                      
          • Push button start
          • Battery kill switch
          • 3 Heavy duty accessory toggle switches with cover
          • Aluminum mounting plate
          • Indicator lights
          • Measures 7.5" x 2.5"
        Goto Previous PagePrevious Page
        1 2 3 4 5 ... 8