Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Driveline & Axles At Speedway Motors

Every racer knows that having huge horsepower is worthless if you can't get it to the wheels. Speedway Motors has the driveline parts you need to put the power to the pavement! From Curries Axles to Fast Shaft Drive Shafts and everything in between, you can count on Speedway Motors to have the parts you need in-stock and ready to ship today!

Featured Products
Winters Quick Change Gears, 10 Spline
From: $59.99
Product Rating: 4.67 Stars
Winters Quick Change Gears, 10 Spline
SKU-80285
x
            
  • 8620 Steel
  • Heat Treated
  • CNC Machined
  • 10 spline
  • 1-1/4" Width

Winters Quick Change Gear Chart

Fast Shafts Steel Drive Shaft
$149.99
Product Rating: 4.50 Stars
Fast Shafts Steel Drive Shaft
SKU-91048318
x
            

Fast Shafts are built using only the best DOM 1020 "Drive Shaft Quality" tubing on the market. All Fastshafts driveshafts are balanced using only the finest balancing equipment.

  • 2" OD x .120 wall
  • Driveshafts are balanced and include 1310 series U-joints
  • Available in 28", 29", 31" and 32.5"
Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
SKU-91048341
x
            
  • Profesionally assembled for oval track racing only 
  • Pro Gears ring & pinion
  • Your choice of gear ratio, 3.50:1 to 7.33:1
  • 31-spline premium mini spool
  • New chromoly cross pin
  • Viton high heat pinion seal
  • Solid pinion bearing spacer with shims
  • Includes 3-5/8"stock Ford yoke.

910-48341 Instructions (PDF)

Third members are made to order. Please allow 24-48 hours for order to ship.

Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
SKU-91048343
x
            
  • Professionally assembled for oval track racing only
  • Includes Pro Gears ring & pinion
  • Your choice of gear ratio, 3.50:1 to 7.33:1
  • Includes 3-5/8" stock Ford yoke
  • Viton high heat pinion seal
  • Solid pinion bearing spacer with shims
  • Plastic storage case

910-48343 Instructions (PDF)

Third members are made to order. Please allow 24-48 hours for order to ship.

Order applicable spool:

  • STD = Standard
  • LITE = Lightweight
  • MEGA = Megalite

Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

"Oval Track, Driveline and Axles" Page 1 of 13

  • Dana Spicer 5-1350X Heavy Duty Cross U-Joint, 1350 Series, Non-Greaseable
    Dana Spicer 5-1350X Heavy Duty Cross U-Joint, 1350 Series, Non-Greaseable
    SKU-910451350
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Heavy Duty U-joint
    • 1350 Series
    • 3.625 x 1.188
    • Non-Greaseable cross shaft


  • Dana Spicer 5-3615X U-Joint w/Coated Caps for Alum Driveshaft, 1350 Series
    Dana Spicer 5-3615X U-Joint w/Coated Caps for Alum Driveshaft, 1350 Series
    SKU-910453615
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Coated Caps
    • 1350 Series
    • 3.625 x 1.188 
    • For use with Aluminum drive shafts
    • Non-Greaseable cross shaft


  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    SKU-9190951
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Winters Side Bell 6 Rib
    From: $244.99
    Winters Side Bell 6 Rib
    SKU-802K1663
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • Winters Performance 6746 Quick Change Standard Rear Cover
    Winters Performance 6746 Quick Change Standard Rear Cover
    SKU-8026746
    x
                
    • Standard rear cover
    • Complete with bearings
  • Winters Performance 7309 Bearing Cone, Steel Spools/Differentials
    Winters Performance 7309 Bearing Cone, Steel Spools/Differentials
    SKU-8027309
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • 9 Inch Ford Housing with Metric Brackets, 60-3/4 Inch Hub-to-Hub Width
    9 Inch Ford Housing with Metric Brackets, 60-3/4 Inch Hub-to-Hub Width
    SKU-91048375
    x
                If your class does not allow a grand national rear end this is your best choice. These housings have new centerless ground 3" tubes installed in reclaimed original Ford 9" housings and have the end and metric brackets jig welded in place. We offer this housing with either centered or 2" offset yoke to the right pinion locations. Works great with Currie cut-to-fit axles. Axles sold separately. Use two 30 inch axles. IMCA Approved.
            
  • Bearing-Seal Kit for Two Mustang II Brake Rotors
    Bearing-Seal Kit for Two Mustang II Brake Rotors
    SKU-91031000
    x
                

    This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

    If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

    Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

    -Large Bearing-
    Thickness: .656"
    Upper OD: 1.900"
    Lower OD: 2.150"
    Bearing ID: 1.375"

    -Small Bearing-
    Thickness: .651"
    Upper OD: 1.380"
    Lower OD: 1.570"
    Bearing ID: 0.864"

    Never install new hubs with old bearings.

  • AFCO 10350 Standard Wide 5 Hub Bearing Kit W/ STD Nuts
    AFCO 10350 Standard Wide 5 Hub Bearing Kit W/ STD Nuts
    SKU-10610350
    x
                Kit fits all wide 5 hubs except early Howe.
            
  • Ford 9 Inch Megalite Steel Full Spool, 28-Spline
    Ford 9 Inch Megalite Steel Full Spool, 28-Spline
    SKU-91048611
    x
                These Ford 9" megalite steel full spools weigh just 5.55 lbs.

    Comparison spool weights:

    • Aluminum - 5.0 lbs.
    • Lite Steel - 6.0 lbs.
    • Standard Steel - 8.9 lbs.
    • Stock carrier with mini spool - 13.7 lbs.

    Note: All Ford 9" full spools use overhaul kit 9190950-31, even if they are a 28-spline spool. The 9190950-31 contains the large I.D. standard O.D. carrier bearings and pinion bearings needed for use with our full spools.

    If you are using the H.D. nodular iron center section which uses the large diameter carrier bearings, order kit 9190950-31s, which also includes the large pinion bearings for use with the Daytona pinion support.

  • 9 Inch Ford Viton Pinion Seal
    9 Inch Ford Viton Pinion Seal
    SKU-912S18833V
    x
                

    These Viton 9" Ford rear axle pinion seals are good to over 400° F. Stock rubber seal starts to deteriorate at about 250° F.

  • Grand National Rear Hub Bolts, Pair
    Grand National Rear Hub Bolts, Pair
    SKU-91048385-2
    x
                

    Pair of Grand National rear end drive flange screws.

    • flathead Allen screws
    • 5/16"-18 x 3/4"
    • 1/2" thread length
    • black oxide coated steel
  • Winters Performance 7439 007 Front Cap O-Ring
    Winters Performance 7439 007 Front Cap O-Ring
    SKU-8027439
    x
                Wide 5 hub replacement parts.
            
  • Dana Spicer 5-3614X U-Joint w/Coated Caps for Alum Driveshaft, 1330 Series
    Dana Spicer 5-3614X U-Joint w/Coated Caps for Alum Driveshaft, 1330 Series
    SKU-910453614
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Coated Caps
    • 1330 Series
    • 3.625 x 1.062 
    • For use with Aluminum drive shafts
    • Non-Greaseable cross shaft


  • GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline
    GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline
    SKU-919831021
    x
                Everything you need for a complete ring and pinion installation job. 

    Kit Includes:

    • cover gasket
    • crush sleeve
    • marking compound and brush
    • pinion and carrier bearings
    • pinion nut and washer
    • pinion seal
    • thread locking compound
    • sealer

    Note: Pinion-depth shims are not included. 

  • Winters Performance 7403T Pro-Eliminator O-Ring, 4 and 6 Rib Bell
    Winters Performance 7403T Pro-Eliminator O-Ring, 4 and 6 Rib Bell
    SKU-8027403T
    x
                

    Pro-Eliminator Rearend and Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    • Winters O-Ring, 4 and 6 Rib Bell

    Winters Replacement Parts Figure (pdf)

    Pro Eliminator Rear End Diagram (GIF) 

  • MPD 13634 Sprint Racing Low Drag Bearing Assembly, REM Finish
    MPD 13634 Sprint Racing Low Drag Bearing Assembly, REM Finish
    SKU-54613634
    x
                These bearing sets fit all Sprint car front hubs using light weight spindles & all midget hubs.

    Testing shows a good quality tapered wheel bearing provides the lowest rolling resistance when a thrust (side) load is applied, compared to all the popular bearing options. Sprint Cars & Midgets are in constant thrust load. MPD takes quality USA made Timken® bearings and REM® Finish for the ultimate low drag race bearing set.

    MPD recommends NEW Bearing Spacers & TFE Low Drag Seals to be used with these REM® Finished Timken® Tapered Roller bearings. Once adjusted for your hub. You simply lock down your spindle nut for a perfect set of Freewheeling Bearings.

    Use an injection needle to selectively fill the bearing with grease only between the rollers, eliminating overpacking and the resultant overheating that occurs. Properly packed bearings will run cooler, have less rolling resistance and may be packed less often.
    • Provides the lowest rolling resistance when a thrust (side) load is applied
    • Includes Timken bearings and REM finish for the ultimate low drag race bearing set
    • Use in conjunction with the MPD bearing spacer (546013607) and TFE low drag seal (546025605)
  • DRP 10503 Adjustable Wide 5 Axle Shaft Wheel Bearing Spacer
    DRP 10503 Adjustable Wide 5 Axle Shaft Wheel Bearing Spacer
    SKU-91010503
    x
                

    These adjustable wheel bearing spacers are easy to install.  They allow you to set the bearing pre-load, preventing over tightening while reducing drag.

    • Anodized aluminum
    • Adjustable
    • Easy installation
    • Set pre-load and reduce drag
    • Sold each
  • Low Friction 28mm Double Row Birdcage Bearing
    Low Friction 28mm Double Row Birdcage Bearing
    SKU-94059142
    x
                

    These low friction 28mm Bird Cage bearings are 1.1" wide with a  3.940" OD.

    • Low friction 28mm double row
    • 1.1" wide, 3.940"outside diameter
    • Fits many different bird cages
  • Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    SKU-8021000
    x
                Perfect for trailers or the race shop!  19" x 25"  Laminated.
            
  • Racing Rearend Tether Tab
    Racing Rearend Tether Tab
    SKU-91637103
    x
                

    These weld-on tether tabs are a special bracket designed to hold the rear end tether in place.  They safely secure the tether to hold the rearend from sliding back out of the torque tube in the event of an accident.

    • Bracket to hold rear end tether in place
    • Welds on
    • Oval track racing applications
  • Winters Grand National Replacement Hub Assembly, 5 on 4-3/4 Inch
    Winters Grand National Replacement Hub Assembly, 5 on 4-3/4 Inch
    SKU-8022566C
    x
                Replacement hub assembly with 5 on 4-3/4" bolt pattern..
            
  • AFCO 9851-8521 Rotor Seal
    $8.99
    AFCO 9851-8521 Rotor Seal
    SKU-10698518521
    x
                Genuine AFCO replacement parts for 1975-81 Ford Granada style rotors 106-98506510 and 106-98506511.
            
  • Simpson 31023BK 3 Inch Torque Tube Restraining Strap
    Simpson 31023BK 3 Inch Torque Tube Restraining Strap
    SKU-63031024
    x
                

    Simpson Racing is all about Racers Safety, Sometimes a torque tube hoop does not justify so use this torque tube restraining strap.

     

    • For 3" torque tube.

     

  • Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    SKU-91048341
    x
                
    • Profesionally assembled for oval track racing only 
    • Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • 31-spline premium mini spool
    • New chromoly cross pin
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Includes 3-5/8"stock Ford yoke.

    910-48341 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

  • Winters Performance 6857G Inspection Plug
    Winters Performance 6857G Inspection Plug
    SKU-8026857
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • 9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    $159.99
    $169.99
    Product Rating: 4.00 Stars
    9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    SKU-91919457
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    SKU-91919633
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Winters Performance 6390A Rear End Gear Cover High Nut Kit
    Winters Performance 6390A Rear End Gear Cover High Nut Kit
    SKU-8026390
    x
                Aluminum rear cover nuts fit Winters rear ends. Set of 10.

    Speedway brand is purple anodized, Winters brand is pictured.

  • Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    SKU-91048343
    x
                
    • Professionally assembled for oval track racing only
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48343 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    SKU-47522564
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Breather Only
    • Clamp on design, no welding required
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • 9 Inch Daytona Rear Pinion Race
    9 Inch Daytona Rear Pinion Race
    SKU-912HM89410
    x
                Ford 9" Race for Daytona pinion support  
            
  • Speedway Steel Drive Shaft, 52-1/2 Inch
    Speedway Steel Drive Shaft, 52-1/2 Inch
    SKU-91048309
    x
                

    Lightweight steel driveshaft lengths measured from center of U-joint to center of U-joint. Drive shafts are not dynamically balanced. We recommend dynamically balancing the driveshaft prior to installation. Several lengths are available.

    • Super strong and much lighter
    • 2-1/2" O.D. tubing
    • Forged yokes
    • Fits most IMCA modifieds

    U-joint # 91048315 works for the front U-joint position on these driveshafts and with the front yokes we sell. Any of the three U-joints listed will work on the rear U-joint location based on rear axle requirement.

  • Flush Mount Rear Axle Oiling Can
    Flush Mount Rear Axle Oiling Can
    SKU-91045850
    x
                Rear end oiling can mounts flush on rear deck.  Aluminum, 24 oz. capacity.  7 1/2" tall, 3" diameter. Mounting flange is 8 1/2" diameter. AN 10 outlet.
            
  • Low Drag Angular Wide 5 Inner Bearing, Steel
    Low Drag Angular Wide 5 Inner Bearing, Steel
    SKU-8027324AC
    x
                Low friction angular conact bearings. No machine work required, these are direct replacement. Works great for those in limited horsepower classes who want to capitalize on every advantage they can get!
            
  • Granada Style Rotor / Speedway and Metric Chassis Outer Wheel Bearing
    Granada Style Rotor / Speedway and Metric Chassis Outer Wheel Bearing
    SKU-912TS3
    x
                

    Replacement parts for 910-31048.

    Replacement outer wheel bearing for 1975-1981 Ford Granada style rotors. Fits Speedway rotor 916-74078.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 13