Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Brakes & Hubs At Speedway Motors

Speedway Motors has the racing brake components you need for the rigors of the oval track. We have top quality rotors, calipers, brackets and hubs, including lightweight wide 5 hubs. Our complete assortment of brake pads will help you tune your brakes to track conditions. Choose from a great selection of master cylinders and pedals, too, as well as the high temp brake fluid you need to keep your brakes performing under the harshest conditions.

"Oval Track, Disc Brake Rotor Hat Sets" Page 1 of 1

  • Stamped Steel Brake Hat, 3 Inch Offset
    Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Note: Failure to follow the installtion instructions will result in damage to the brake hat and will result in excess run out of the rotor.

    Instructions (PDF)

  • Garage Sale - US Brake Disc Brake Hat, 1.71 Inch Deep, 8 On 7 Inch
    Garage Sale
    Garage Sale - US Brake Disc Brake Hat, 1.71 Inch Deep, 8 On 7 Inch
    x
                
    • Lightweight Design with a 1.710" offset
    • Rotor Hat 4-1/2", 4-3/4", 5"

          Note: Axle Flanges May Require Machining for Hats

     

    These brake hats are garage sale priced because they are new old stock.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - US Brake Disc Brake Hat, 1.41 Inch Deep, 8 On 7 Inch
    Garage Sale
    Garage Sale - US Brake Disc Brake Hat, 1.41 Inch Deep, 8 On 7 Inch
    x
                
    • Lightweight Design with a 1.410" offset
    • Rotor Hat 4-1/2", 4-3/4", 5"

          Note: Axle Flanges May Require Machining for Hats

     

    These brake hats are garage sale priced because they are new old stock.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    Garage Sale
    Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications

    Wilwood Specs Sheet

     

    This is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Wilwood 170-3695 IMCA Spun Steel Brake Hat
    Wilwood 170-3695 IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications
    Wilwood Specs Sheet
  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Instructions (PDF) 

     

    This is garage sale priced because it has been used and partially modified.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Wilwood GT Rear Brake Hat, 5 On 5"
    Garage Sale
    Garage Sale - Wilwood GT Rear Brake Hat, 5 On 5"
    x
                

    This brake hat is garage sale priced because it has been bolted and returned.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS