Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors has the racing brake components you need for the rigors of the oval track. We have top quality rotors, calipers, brackets and hubs, including lightweight wide 5 hubs. Our complete assortment of brake pads will help you tune your brakes to track conditions. Choose from a great selection of master cylinders and pedals, too, as well as the high temp brake fluid you need to keep your brakes performing under the harshest conditions.

"Oval Track, Disc Brake Rotor Hat Sets" Page 1 of 1

  • Stamped Steel Brake Hat, 3 Inch Offset
    Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Instructions (PDF)

  • Garage Sale - US Brake Disc Brake Hat, 1.71 Inch Deep, 8 On 7 Inch
    Garage Sale
    Garage Sale - US Brake Disc Brake Hat, 1.71 Inch Deep, 8 On 7 Inch
    x
                
    • Lightweight Design with a 1.710" offset
    • Rotor Hat 4-1/2", 4-3/4", 5"

          Note: Axle Flanges May Require Machining for Hats

     

    These brake hats are garage sale priced because they are new old stock.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    Garage Sale
    Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications

    Wilwood Specs Sheet

     

    This is garage sale priced because it has been used. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - US Brake Disc Brake Hat, 1.41 Inch Deep, 8 On 7 Inch
    Garage Sale
    Garage Sale - US Brake Disc Brake Hat, 1.41 Inch Deep, 8 On 7 Inch
    x
                
    • Lightweight Design with a 1.410" offset
    • Rotor Hat 4-1/2", 4-3/4", 5"

          Note: Axle Flanges May Require Machining for Hats

     

    These brake hats are garage sale priced because they are new old stock.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                Please view the product's page for more information
            
  • Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    Garage Sale
    Garage Sale - Wilwood IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications

    Wilwood Specs Sheet

     

    This is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Wilwood 170-0357 Aluminum Brake Hat, 1.77 Inch Offset
    Wilwood 170-0357 Aluminum Brake Hat, 1.77 Inch Offset
    x
                

    Willwood brake hats have a long standing reputation for fit, performance, and durability. Manufactured from premium grade aluminum alloys offering high strength and low weight.

    Wilwood Brake Hat Chart (Link)

  • Garage Sale - Wilwood 170-3695 IMCA Spun Steel Brake Hat
    Garage Sale
    Garage Sale - Wilwood 170-3695 IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications

    Wilwood Specs Sheet 

     

    This is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO IMCA Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - AFCO IMCA Steel Brake Hat, 3 Inch Offset
    x
                
    • Spun steel hat with 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circle patterns
    • Rotor: 7" bolt circle; eight holes
    • Hub with .50" diameter mounting holes
    • 3.00" offset
    • 3.06" diameter of center hole
    • Weighs just 2 lbs.
    • IMCA approved
    • 5.83" clearance I.D.

    Note: Axle flanges may require machining for hats.

     

    This brake hat is garage sale priced because it has been installed and returned.  This one has some slight runout. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    This brake hat is garage sale priced because it has been bolted on and returned and has some slight runout.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • AFCO IMCA Steel Brake Hat, 3 Inch Offset
    AFCO IMCA Steel Brake Hat, 3 Inch Offset
    x
                
    • Spun steel hat with 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circle patterns
    • Rotor: 7" bolt circle; eight holes
    • Hub with .50" diameter mounting holes
    • 3.00" offset
    • 3.06" diameter of center hole
    • Weighs just 2 lbs.
    • IMCA approved
    • 5.83" clearance I.D.

    Note: Axle flanges may require machining for hats.

  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 1/2" diameter mounting holes
    • 3.00" offset
    • 3.06" diameter center hole
    • 5.83" I.D. clearance

    These brake hats are garage sale priced because they have some slight run out.  These have been installed and returned.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Wilwood 170-0259 Aluminum Brake Hat, 1.71 Inch Offset
    Wilwood 170-0259 Aluminum Brake Hat, 1.71 Inch Offset
    x
                

    Willwood brake hats have a long standing reputation for fit, performance, and durability. Manufactured from premium grade aluminum alloys offering high strength and low weight.

    Wilwood Brake Hat Chart (Link)

  • Wilwood 170-0208 Aluminum Brake Hat, 1.96 Inch Offset
    Wilwood 170-0208 Aluminum Brake Hat, 1.96 Inch Offset
    x
                

    Willwood brake hats have a long standing reputation for fit, performance, and durability. Manufactured from premium grade aluminum alloys offering high strength and low weight.

    Wilwood Brake Hat Chart (Link)

  • Wilwood 170-3695 IMCA Spun Steel Brake Hat
    Wilwood 170-3695 IMCA Spun Steel Brake Hat
    x
                
    • Lightweight, high-strength spun steel hats
    • Provide solid mounting of bolt-on rotors to OE axles and racing hubs when aluminum hats are not allowed
    • Features multi-hole lug pattern for universal application on the popular 5 lug mount patterns
    • Not for use on parking brake applications
    Wilwood Specs Sheet
  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    Garage Sale
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Instructions (PDF) 

     

    This is garage sale priced because it has been used and partially modified.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Wilwood GT Rear Brake Hat, 5 On 5"
    Garage Sale
    Garage Sale - Wilwood GT Rear Brake Hat, 5 On 5"
    x
                

    This brake hat is garage sale priced because it has been bolted and returned.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS