Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors. Featuring products from the top brands like Bert, Brinn, AFCO, and Falcon Transmission, you can count on Speedway Motors having the parts you need, when you need them. And with a 98% in-stock rate and same day shipping, you can bet you'll get it fast!

"Oval Track, Clutch Release Bearings" Page 1 of 1

  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP45591
    x
                Please view the product's page for more information
            
  • Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    SKU-60578130
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Kits contain the bearing, bleeder hose assembly, shims and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches. 

    This bearing comes with a new special machined front bearing retainer for the release bearing to ride on.

    • The sleeve ID 1.385
    • The bearing OD 2.940
    • Length collapsed 2.174
    • Length extended 3.032
    • Stroke .867

    NOTE:  NOT meant for use with world class T-5 cases

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • GM Short Manual Release Bearing
    GM Short Manual Release Bearing
    SKU-51516010
    x
                

    High performance manual clutch release bearing for most GM 3-speed and 4-speed manual transmissions. Replaces throwout bearing 614-01B-BCA.

    • Withstands high-spring pressure and high RPM operation
    • Heat-treated and blanchard-ground to ensure trueness
    • Ball bearing race packed with heat-resistant moly-based grease
    • Nylon liner and bearing retainer for cool, quiet operation
    • Overall Thickness (Length):  1.270"
    • Face Width:  2.725"
    • I.D.:  1.37"
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    New
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    SKU-60578126
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually
  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP46516
    x
                Please view the product's page for more information
            
  • Ram Street Stock Hydraulic Throwout Bearing - Ford Tremac
    Ram Street Stock Hydraulic Throwout Bearing - Ford Tremac
    SKU-60578132
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Kits contain the bearing, shims, fittings for AN# 3 connection, bleed line, and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches. 

    This bearing comes with a new special machined front bearing retainer for the release bearing to ride on. 

    • The sleeve ID 1.379
    • The bearing OD 2.940
    • Length collapsed 2.192
    • Length extended 3.050
    • Stroke .853

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP43751
    x
                Please view the product's page for more information
            
  • Racing Clutch Hydraulic Throwout Bearing
    $99.99
    $119.99
    Product Rating: 5.00 Stars
    Racing Clutch Hydraulic Throwout Bearing
    SKU-91025602
    x
                

    Ultra lightweight clutch release bearing for Chevy or Ford transmissions. Installs by simply removing two of the bearing retainer bolts and replacing them with the provided studs. Use 3/4" bore master cylinder.

    Works with the following clutches:

    • Tilton 2-disc or 3-disc (7.25" and 5.5")
    • Quartermaster 2-disc or 3-disc (7.25" and 5.5")
    • Ram Assault 2-disc or 3-disc (1996 and newer)

    910-25602 Instructions (PDF)

    NOTE: Will not work with stock-style clutches or Ram Couplers.

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP46015
    x
                Please view the product's page for more information
            
  • GM Stock Clutch Hydraulic Throwout Bearing
    GM Stock Clutch Hydraulic Throwout Bearing
    SKU-91025610
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF)

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Clutches 78100 Round Chevy Ram Hydraulic Throwout Bearing
    Ram Clutches 78100 Round Chevy Ram Hydraulic Throwout Bearing
    SKU-60548100
    x
                

    Adjustable hydraulic throwout bearing. External bleeder provided. Ribs on transmission bearing support must be machined flat. Use only with dual or triple disc clutches. Use 7/8" bore master cylinder. 

    Bearing ID 1.357 Throw out bearing OD 2.50 Stroke .500 Over all height 2.013 This fits a standard Saginaw or Muncie transmission.

    AN3 fittings.

    Use Round Face with diaphragm type clutches. Use Flat Face with finger type clutches.

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • 2.3 Ford Release Bearing
    $29.99
    2.3 Ford Release Bearing
    SKU-8901519
    x
                

    Clutch release (throwout) bearing for your 2.3 Ford race motor.

  • Quarter Master 710200 Hydraulic Throwout Bearing for 5.5 Inch Clutch
    Quarter Master 710200 Hydraulic Throwout Bearing for 5.5 Inch Clutch
    SKU-910710200
    x
                

    This floating hydraulic throwout bearing is designed for 5.5" clutches using a flexplate and button clutch combination. Bearing comes with enough fittings so that you could use a -3 AN or -4 AN supply line.

    • Bleed hose NOT included 
    • Bleeder hole is threaded 5/16"-24
    • Collapsed height: 2.350"
    • Outside diameter: 4.410"
    • Inside diameter: 1.425"

    910-710200 Instructions (PDF)

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    SKU-605498
    x
                

    High performance manual clutch release bearing for most GM 3-speed and 4-speed manual transmissions. When you switch from a stock clutch to a racing clutch, you may need a longer release bearing like this one. These are 2-1/2" in overall length,  have a 1.370" I.D. for GM-based transmissions, and have a rounded bearing face.

    • Withstands high-spring pressure and high RPM operation
    • Heat-treated and blanchard-ground to ensure trueness
    • Ball bearing race packed with heat-resistant moly-based grease
    • Nylon liner and bearing retainer for cool, quiet operation
    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.500"
    • Face Width:  2.725"
    • I.D.:  1.37"
  • Ram Clutches 498F Ford T-5 Manual Release Bearing
    Ram Clutches 498F Ford T-5 Manual Release Bearing
    SKU-605498F
    x
                

    When you switch from a stock clutch to a racing clutch, you may need a longer release bearing. These are 2-1/4" in overall length and have a 1.433" I.D. for Ford T5 5-speed manual transmissions (will not fit GM T-5).

    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.25"
    • I.D.:  1.433"

     

  • Garage Sale - Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    Garage Sale
    Garage Sale - Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    SKU-UP43096
    x
                Please view the product's page for more information
            
  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP43126
    x
                Please view the product's page for more information
            
  • Flathead Clutch Release Bearings
    Flathead Clutch Release Bearings
    SKU-91025620
    x
                

    Everyday it's getting harder to find usable Flathead clutch components. We offer these new replacement clutch release bearings for your Flathead. This bearing assy is typical of those used on '35-'48 Ford passenger cars (except with the V8-60). This is the bearing and the collar.

  • Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - Racing Clutch Hydraulic Throwout Bearing
    SKU-UP43627
    x
                Please view the product's page for more information
            
  • Ram Clutches 78160 Retrofit T-56 Hydraulic Bearing Kit
    Ram Clutches 78160 Retrofit T-56 Hydraulic Bearing Kit
    SKU-60578160
    x
                

    The T-56 bearing is designed for use in retrofit or custom applications with GM engines.  Early engine applications require a transmission spacer with the T-56.  Check with your transmission supplier.  This kit contains all mounting hardware, fittings and remote bleeder.  This bearing requires a 3/4 inch master cylinder. 

    • Retrofit or custom GM engine applications
    • Early engines require transmission spacer
    • Contains all hardware, fittings and remote bleeder
    • Requires 3/4 inch master cylinder
    WARNING:  A person has to be careful to purchase the right parts for this. Not all T-56 use the same parts.  Ford and GM are different, LT and LS are different.

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Clutches 497 Ford Transmission Manual Release Bearing, Triple Disc
    Ram Clutches 497 Ford Transmission Manual Release Bearing, Triple Disc
    SKU-605497
    x
                

    Repair throwout bearing for Ram oval track "assault" racing clutch.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 78125 Street Stock Hydraulic Throwout Bearing Only
    Ram Clutches 78125 Street Stock Hydraulic Throwout Bearing Only
    SKU-60578125
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Includes:

    • (2) 1/8"NPT to AN3 adaptors
    • (1) AN3 to 1/8" female adaptor
    • (2) Anti-rotation studs
    • (1) 19" AN3 line
    • Shims

     

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Clutches 495 GM Triple Disc Transmission Manual Release Bearing
    Ram Clutches 495 GM Triple Disc Transmission Manual Release Bearing
    SKU-605495
    x
                

    Repair throwout bearing for Ram oval track "assault" racing clutch.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Howe Racing 82876 GM T-5 Stock Clutch Hydraulic Throwout Bearing
    Howe Racing 82876 GM T-5 Stock Clutch Hydraulic Throwout Bearing
    SKU-91025612
    x
                Please view the product's page for more information