Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Engines At Speedway Motors

Speedway Motors is the circle track engine authority! Whether you have a Ford or Chevy race motor, Speedway has the engine parts you need at the best prices around. Our large assortment of iron cylinder heads, performance camshafts and racing valve train components allows you to tailor your engine to any racing condition. Speedway also has a variety of durable claimer engine kits, oil pumps and oil pans to help keep costs down without sacrificing performance or reliability.

"Oval Track, Camshafts" Page 1 of 3

  • COMP Cams 12-600-4 Thumpr Cam, Small Block Chevy, 2000-5800 RPM
    COMP Cams 12-600-4 Thumpr Cam, Small Block Chevy, 2000-5800 RPM
    x
                

    Have you ever been to the races and heard how nasty the cams sound? COMP Cams has developed the Thumpr series of cams that give you every day drivability, but have that nasty race engine sound. Pick the cam that fits your application, add a set of Comp Cams hydraulic lifters and you will be the talk of the town.

    High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

    Thumpr Application Chart (GIF)

    282-126004 Specs (PDF)

  • Speedway Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM
    Speedway Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM
    x
                Speedway Tight Lash cams produce a broad range of power due to the short amount of cam degrees it takes to go from .020" lift to .050" cam lift. This is known as major intensity. The shorter the span the more torque the lobe will produce, and for the lobe to run excellent up at higher RPM, it must have an excellent area under the curve. You can tell these do because of the very high duration at .200" cam lift. 

    Compare our numbers to other cam profiles and you will find that these are far superior!

    Cam Card - 91515001 (PDF)

    Cam Application Chart (GIF)

    915-15001 Instructions (PDF)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/302 Small Block Chevy 400
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/302 Small Block Chevy 400
    x
                

    These camshaft / lifter kits are perfect for use with SBC 400 to 427 CID Air Flow Research 220-235 heads. Max power 6300 rpm, Peak torque 3500. This cam was designed for 1.6 ratio rockers to be used with the AFR heads. The increase lifter velocity maximizes the fill rate of these heads on large stroke engines from 3.75 to 4.00". The cam will maximize RAM Effect and fill cylinder for increase VE. Use of 1.750" on engines up to 412CID and 1.875" on engines over 412CID is highly recommended. We recommend a 3200 stall, a 850CFM carb, and a minimum of 10:1 compression.

    • Adv. - 296 / 302
    • .050" - 237 / 243
    • .100" - 206 / 212
    • .200" - 155 / 158
    • .300" - 96 / 92
    • Lift - .584 / .565
    • Centerlines - 104 / 112
    • Lobe Sep. - 108
    • Includes a set of tie-bar style hydraulic roller lifters
  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/300 Big Block Chevy 496
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 296/300 Big Block Chevy 496
    x
                

    These camshaft / lifter kits are perfect for use with BBC 477 to 496 with 4.25" stroke with Air Flow Research 290 or 305 heads to a max of 6000 rpm. Welcome to the brotherhood of 625HP on pump gas with over 640#/ft. This cam will produce over 600HP with a single plane and right at 600HP with an air-gap intake. Single plane will make 25 more HP and sacrifice 10#/ft. of torque. Carb of choice is a 950HP 4150. 2" headers are recommended. Be sure you have changed U-joints and upgraded rear gears. Muncie 4 speed, use at your own risk. Ok with power brakes. 900 RPM Idle.

    • Adv. - 296 / 300
    • .050" - 237 / 241
    • .200" - 154 / 151
    • Lift - .617 / .570
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Speedway Ford 351W Solid Lifter Cam, 3000-6750 RPM
    Speedway Ford 351W Solid Lifter Cam, 3000-6750 RPM
    x
                

    Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested! Cam can also be used in 289/302 engines if ignition firing order is changed to 351W: (1-3-7-2-6-5-4-8).

    Must be used with a break-in oil additive (sold separately).

    Cam Card - 91555011 (PDF) 

    351W Cam Application Chart (GIF)

    915-55011 Instructions (PDF)

  • Clay Smith Hydraulic Roller Cam / Lifter, 284/286 Big Block Chevy 454
    Clay Smith Hydraulic Roller Cam / Lifter, 284/286 Big Block Chevy 454
    x
                

    These camshaft / lifter kits are perfect for use with BBC 454 to 470 CID with Air Flow Research 265 or 290 Oval Port heads to max of 6000 rpm. If you have built your teenage dream car and put AFR oval ports on it than there is no doubt this is the cam for you. We recommend a high rise dual plane with the center notched. An 850HP carb would be our choice with a good set of 13/4" headers. Don't worry about gear ratio, it will pull anything you put under it. Great with power brakes. Buy stock in tires. 750 RPM Idle.

    • Adv. - 284 / 286
    • .050" - 225 / 227
    • .200" - 137 / 136
    • Lift - .559 / .530
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Isky Racing Cams 814000 400 Jr. 1949-53 Flathead Ford Camshaft
    Isky Racing Cams 814000 400 Jr. 1949-53 Flathead Ford Camshaft
    x
                

    Not for the faint of heart, and not for the street! This famous Isky 400 Jr. grind camshaft is full race, competition only and is recommended only for the experienced flathead V8 racer.

    Cam Application Chart (PDF)

    450-814000 Specs (Link)

  • Garage Sale - Crower Big Block Chevy Gas Streacher Cam
    Garage Sale
    Garage Sale - Crower Big Block Chevy Gas Streacher Cam
    x
                

    This cam is garage sale priced because it is newold stock.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • COMP Cams 35-600-4 Thumpr Cam, Ford 302-351W, 2000-5800 RPM
    COMP Cams 35-600-4 Thumpr Cam, Ford 302-351W, 2000-5800 RPM
    x
                

    Have you ever been to the races and heard how nasty the cams sound? COMP Cams has developed the Thumpr series of cams that give you every day drivability but have that nasty race engine sound. Pick the cam that fits your application, add a set of COMP Cam hydraulic lifters and you will be the talk of the town. 

    Thumpr Camshafts are a new series of retro-fit hydraulic roller and hydraulic flat tappet cams designed for use in a variety of small and big block V8s. The aggressive exhaust note of a Thumpr cam comes from a combination of early exhaust valve opening, long exhaust duration and a generous amount of intake and exhaust overlap - maximizing the rough-idling characteristics of the cams without negatively impacting power or streetability.

    282-356004 Specs (PDF)

  • Isky Racing Cams 818800 Isky 88 1949-53 Flathead Ford Camshaft
    Isky Racing Cams 818800 Isky 88 1949-53 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building a "full race" flathead. It's hard to be the Max-1 grind for street use, but you may need a little more or less for your combination. Make sure you check valve to head clearance before installing heads.

    Cam Application Chart (PDF)

    450-818800 Specs (Link)

  • Garage Sale - Alliance Hydraulic Cam For Big Block Mopar
    Garage Sale
    Garage Sale - Alliance Hydraulic Cam For Big Block Mopar
    x
                

    These cams are garage sale priced because we no longer offer them.

     

    See 3rd photo for cam specs. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

    HYDRAULIC FLAT TAPPET CAM FOR 361-383-413-426W AND 440 MOPAR W/ SINGLE BOLT
    CAM.

     

    350-440 Mopar 



    206 INTAKE DURATION @ .050"
    208 EXHAUST DURATION @ .050"
    .434 INTAKE AND EXHAUST LIFT

    STOCK REPLACEMENT CAM FOR FACTORY 383 AND 440 "MAGNUM" ENGINES. GOOD DAILY
    DRIVER, STOCK CONVERTER 3.08 GEARS STOCK TYPE IDLE.


     

     

  • COMP Cams 12-520-5 S/B Chevy .400 Lift Hydraulic Cam, 3000-6000 RPM
    COMP Cams 12-520-5 S/B Chevy .400 Lift Hydraulic Cam, 3000-6000 RPM
    x
                

    COMP Comp Cams hydraulic flat tappet camshaft for .400" low lift rules. Camshafts must be used with an oil additive (sold separately).

    Cam Application Chart (GIF)

    282-125205 Specs (Link)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, Small Block Chevy 350 w/ E-Street Heads
    Clay Smith Hydraulic Roller Cam / Lifter Kit, Small Block Chevy 350 w/ E-Street Heads
    x
                

    These camshaft / lifter kits are perfect for use with SBC 350 to 360 CID with Edelbrock E-Street 185-210 heads. Max power 6000-6200 rpm Peak Torque 3600-3800. Aggressive idle and throttle response. This cam is for the guy wanting neck-snapping power from stoplight to stop light. 15/8" headers work best but RAM Horn manifolds can be used. A 2400 stall and 750 CFM carb will work the best with this cam. Use with minimum of 9:1 compression.

    • Adv. - 280 / 294
    • .050" - 221 / 235
    • .100" - 191 / 204
    • .200" - 140 / 150
    • .300" - 74 / 79
    • Lift - .510 / .510
    • Centerlines - 104 / 112
    • Lobe Sep. - 108
    • Includes a set of tie-bar style hydraulic roller lifters
  • Isky Racing Cams 211100 Max-1 1932-48 Flathead Ford Camshaft
    Isky Racing Cams 211100 Max-1 1932-48 Flathead Ford Camshaft
    x
                

    Isky’s Max-1 is by far the best camshaft we have found for the vast majority of all flathead V8-powered street rods. It offers a great hot rod sound without sacrificing street manners, and provides good low-speed power with both stock and multi-carb intake manifolds.

    Cam Application Chart (GIF)

    450-211100 Specs (Link)

  • Isky Racing Cams 210433 Isky 433 1932-48 Flathead Ford Camshaft
    Isky Racing Cams 210433 Isky 433 1932-48 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building an all-out competition flathead. Make sure you check valve to head clearance before installing heads. 

    Cam Application Chart (GIF)

  • Isky Racing Cams 218800 Isky 88 1932-48 Flathead Ford Camshaft
    Isky Racing Cams 218800 Isky 88 1932-48 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building a "full race" flathead. It's hard to be the Max-1 for street use, but you may need a little more or less for your combination. Make sure you check valve to head clearance before installing heads.

    Cam Application Chart (GIF)

    450-218800 Specs (Link)

  • COMP Cams 11-601-4 Mutha Thumpr Cam, Chevy 396-454, 2000-5900 RPM
    COMP Cams 11-601-4 Mutha Thumpr Cam, Chevy 396-454, 2000-5900 RPM
    x
                

    Have you ever been to the races and heard how nasty the cams sound? COMP Cams has developed the Thumpr series of cams that give you every day drivability, but have that nasty race engine sound. Pick the cam that fits your application, add a set of COMP Cam hydraulic lifters and you will be the talk of the town.

    Thumpr Application Chart (Link)

    282-116014 Specs (PDF)

  • Isky Racing Cams 817700 Isky 77-B 1949-53 Flathead Ford Camshaft
    Isky Racing Cams 817700 Isky 77-B 1949-53 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building a basic street flathead. The 77-B is a low speed and midrange power cam with a good idle. A stock carburetor can be used with this cam. Make sure you check valve to head clearance before installing heads. 

    Cam Application Chart (PDF)

    450-817700 Specs (Link)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 288/294 Big Block Chevy 454
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 288/294 Big Block Chevy 454
    x
                

    These camshaft / lifter kits are perfect for use with BBC 454 to 470 CID with GM Edelbrock Roval Heads to a max of 6000 rpm or ProMaxx 320 runner heads to 6400 rpm. This cam defines American Muscle and brute torque. Headers with 13/4" tubes & 3" collector recommended. Use a minimum of 850 CFM carb with either a dual plane intake with notched divider or single plane. Good with power brakes. ET Street tires are your friend with this cam. 800 RPM Idle.

    • Adv. - 288 / 294
    • .050" - 229 / 235
    • .200" - 145 / 147
    • Lift - .590 / .559
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Speedway Small Block Chevy Street Hydraulic Camshaft, 2000-4500 RPM
    Speedway Small Block Chevy Street Hydraulic Camshaft, 2000-4500 RPM
    x
                

    Our flat tappet hydraulic cams offer superior performance and the very best value. These grinds are tried and tested! Must be used with a break-in oil additive (sold separately).

    Cam Card - 91512005 (PDF) 

    Application Chart (GIF)

    915-112424 Instructions  (PDF)

  • COMP Cams 12-676-4 S/B Chevy Vacuum Solid Lifter Cam, 1600-6000 RPM
    COMP Cams 12-676-4 S/B Chevy Vacuum Solid Lifter Cam, 1600-6000 RPM
    x
                

    There are many things that effect vacuum. Camshaft lobe separation, lifter style, intake manifold, piston rings, compression ratio and overall valve and engine condition. Due to many and varied engine combinations, Speedway Motors offers no warranty on camshaft and or lifters for either performance, vacuum or longevity.

    Must be used with break-in oil additive (sold separately).

    Vacuum Rule Cam Chart (GIF) 

    282-126764 Specs (PDF)

  • Garage Sale - Camshaft for 351C-400 Ford
    Garage Sale
    Garage Sale - Camshaft for 351C-400 Ford
    x
                

    Clearance!!

     

    See 3rd photo for cam specs. 

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

     

    Fits 351C-351M-400 Ford.

  • Garage Sale - Big Block Ford Street Cam
    $49.99
    $65.99
    Garage Sale
    Garage Sale - Big Block Ford Street Cam
    x
                

    This item is garage sale priced because it has been discontinued.

     

    See 3rd photo for cam specs.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

     

    Fits 352-428 Ford 

  • Isky Racing Cams 217700 Isky 77-B 1932-48 Flathead Ford Camshaft
    Isky Racing Cams 217700 Isky 77-B 1932-48 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building a basic street flathead. The 77-B is a low speed and midrange power cam with a good idle. A stock carburetor can be used with this cam. Make sure you check valve to head clearance before installing heads. 

    Cam Application Chart (GIF)

    450-217700 Specs (Link)

  • Isky Racing Cams 810433 Isky 433 1949-53 Flathead Ford Camshaft
    Isky Racing Cams 810433 Isky 433 1949-53 Flathead Ford Camshaft
    x
                

    This is the cam of choice of choice if you are building an all-out competition flathead. Make sure you check valve to head clearance before installing heads. 

    Cam Application Chart (PDF)

    450-810433 Specs (Link)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 292/302 Big Block Chevy 496
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 292/302 Big Block Chevy 496
    x
                

    These camshaft / lifter kits are perfect for use with BBC 477 to 496 with 4.25" stroke with OEM 188 or 990's ProMaxx or RHS 320s. Max rpm 5800-6200. For those of you that go old school and want to use the legendary GM Square Ports this is your cam. Welcome to the brotherhood of BBC that make 600HP and 600#/ft. on pump gas! This cam will also work with the listed aftermarket aluminum heads. Single plane intake would be your best choice, and you will not sacrifice any torque. Carb of choice is a 950HP 4150. 2" headers are recommended. Be sure to have the car washed because when you pull into cruise night everybody will turn their heads. Will show no mercy on manual transmission. Good with power brakes. 850 Idle RPM

    • Adv. - 292 / 302
    • .050" - 233 / 243
    • .200" - 152 / 158
    • Lift - .620 / .600
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • COMP Cams 12-824-14 4/7 Swap S/B Chevy Solid Roller Cam, 6000-8200 RPM
    COMP Cams 12-824-14 4/7 Swap S/B Chevy Solid Roller Cam, 6000-8200 RPM
    x
                

    Mechanical roller tappet camshaft for oval track applications by COMP Cams. Cam features a 4/7 swap firing order (18736542 firing order) which exchanges the 4 and 7 camshaft lobe timing in small block Chevy V8s. This provides a smoother application of force to the crankshaft. Some 4/7 swap engines will experience horsepower gains, but all of them will gain an exceptionally smooth torque curve with this new firing order technology.

    Cam Application Chart (GIF)

    282-1282414 Specs (Link)

  • COMP Cams 12-690-47 4/7 Swap S/B Chevy Solid Lifter Cam, 3400-7200 RPM
    COMP Cams 12-690-47 4/7 Swap S/B Chevy Solid Lifter Cam, 3400-7200 RPM
    x
                

    Mechanical flat tappet camshaft for oval track applications by COMP Cams. Cam features a 4/7 swap firing order (18736542 firing order) which exchanges the 4 and 7 camshaft lobe timing in small block Chevy V8s. This provides a smoother application of force to the crankshaft. Some 4/7 swap engines will experience horsepower gains, but all of them will gain an exceptionally smooth torque curve with this new firing order technology.

    Cam Application Chart (GIF)

    282-1269047 Specs (Link)

  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 294/294 Big Block Chevy 502
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 294/294 Big Block Chevy 502
    x
                

    These camshaft / lifter kits are perfect for use with BBC 502 to 509 with 4" stroke and Air Flow Research 290 or 305 heads to a max of 6000 rpm. Welcome to the brotherhood of 600HP on pump gas with over 600#/ft. This cam will produce over 600HP with a single plane and right at 600HP with an airgap intake. Single plane will make 25 more HP and sacrifice 10#/ft. of torque. Carb of choice is a 950HP 4150. 17/8" headers are recommended. Do not leave keys in car when oldest child is home alone. Ok with power brakes. 850 RPM Idle.

    • Adv. - 294 / 294
    • .050" - 235 / 235
    • .200" - 147 / 147
    • Lift - .559 / .559
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Speedway Small Block Chevy Oval Track Solid Lifter Cam, 2500-6250 RPM
    Speedway Small Block Chevy Oval Track Solid Lifter Cam, 2500-6250 RPM
    x
                

    Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

    Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

    If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

    Cam Card - 91514103 (PDF)

    Cam Application Chart (Link)

    Small Block Chevy Camshaft Installation Instructions (PDF)

  • Speedway S/B Chevy Street Hydraulic Camshaft, 2000-4500 RPM
    Speedway S/B Chevy Street Hydraulic Camshaft, 2000-4500 RPM
    x
                

    Our flat tappet hydraulic cams offer superior performance and the very best value. These grinds are tried and tested! Must be used with a break-in oil additive (sold separately).

    Cam Card - 915111424 (PDF) 

    Application Chart (GIF)

    915-111424 Instructions  (PDF)

  • Garage Sale - Crower 16000 Camshaft, Ford 332-352 FE Engine
    Garage Sale
    Garage Sale - Crower 16000 Camshaft, Ford 332-352 FE Engine
    x
                

    This item is garage sale priced because it has been discontinued.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    Camshaft from Crower for Ford FE engine, 332-352.  Inlcudes cam card.

  • Garage Sale - Camshaft for 352-428 Ford
    $59.99
    $69.99
    Garage Sale
    Garage Sale - Camshaft for 352-428 Ford
    x
                

    This item is garage sale priced because it has been discontinued.

      

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    Hi-torque performance cam for 352-428 Ford.

     

    See 3rd photo for cam specs.  

     

  • Clay Smith Hydraulic Roller Cam/Lifter Kit, 282/296 Small Block Chevy 327-350
    Clay Smith Hydraulic Roller Cam/Lifter Kit, 282/296 Small Block Chevy 327-350
    x
                

    These camshaft / lifter kits are perfect for use with SBC 330-358 CID with OEM Double (Camel) Hump heads, unported. Max Power for 3.25" Stroke engine at 6500 peak torque 3800. For 3.48" Stroke engines peak power at 6200 and peak torque at 3500. Use of Louis tool and 1.6 ratio will gain you another 200 rpm. Old school sound with new school power. Designed for use with Rams horn manifolds. Cam is designed to retrofit old school engines with modern performance gains.

    • Adv. - 282 / 296
    • .050" - 223 / 237
    • .100" - 192 / 206
    • .200" - 143 / 155
    • .300" - 86 / 96
    • Lift - .545 / .534
    • Centerlines - 104 / 112
    • Lobe Sep. - 108
    • Includes a set of tie-bar style hydraulic roller lifters
  • COMP Cams 12-602-4 Big Mutha Thumpr Cam, S/B Chevy, 2500-6400 RPM
    COMP Cams 12-602-4 Big Mutha Thumpr Cam, S/B Chevy, 2500-6400 RPM
    x
                

    Have you ever been to the races and heard how nasty the cams sound? Comp Cams has developed the Thumpr series of cams that give you every day drivability, but have that nasty race engine sound. Pick the cam that fits your application, add a set of COMP Cam hydraulic lifters and you will be the talk of the town. 

    Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

    Thumpr Application Chart (GIF)

    282-126024 Specs (PDF)

  • Speedway Small Block Chevy Oval Track Solid Lifter Cam, 3500-7500 RPM
    Speedway Small Block Chevy Oval Track Solid Lifter Cam, 3500-7500 RPM
    x
                

    Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

    Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

    If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

    Cam Card - 91514101 (PDF)

    Cam Application Chart (Link)

    915-14101 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3