Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Brakes & Hubs At Speedway Motors

Speedway Motors has the racing brake components you need for the rigors of the oval track. We have top quality rotors, calipers, brackets and hubs, including lightweight wide 5 hubs. Our complete assortment of brake pads will help you tune your brakes to track conditions. Choose from a great selection of master cylinders and pedals, too, as well as the high temp brake fluid you need to keep your brakes performing under the harshest conditions.

Featured Products
Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
x
            

If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

  • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
  • For Ford passenger car axles ONLY 
  • Fits axle with maximum flange diameter of 6-1/4" O.D.
  • For 15" and larger wheel applications ONLY

NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

Axle Flange Identification Chart (GIF)

910-31921 Instructions (PDF)

Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
x
            

Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

916-31926 Instructions (PDF) 

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

Speedway 1969-77 GM Midsize Caliper
Speedway 1969-77 GM Midsize Caliper
x
            Rebuilt 1969-77 mid and full size caliper. 7/16"-20 inlet so you can use the readily available brake hoses and hardware from Pre-1978 GM midsize cars. IMCA approved. 

No core charge required. Fits 1" thick rotor. 2.8" diameter pistons installed. It has 7-1/16" center to center mounting holes. The width between mounting tabs is 2-3/4".
1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

"Oval Track, Brake" Page 1 of 25

  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • GM Caliper Slider Bolt
    $2.99
    Product Rating: 4.00 Stars
    GM Caliper Slider Bolt
    x
                The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
            
  • Speedway 338 Medium Double Quick Change Brake Pad
    Speedway 338 Medium Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    x
                

    Every rotor is cast from premium grade, long grain carbon iron which exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 32 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations.

    • Thickness: GM .810"
    • Outside Diameter: 11.75"
    • # Holes: 8
    • Bolt Circle: 7"
    • Thread: Thru
    • Weight: 8.00 lbs

    Pro-Lite Rotor Application Chart (GIF)

  • Wilwood 220-0063 Bleeder Screw Assembly, Single
    Wilwood 220-0063 Bleeder Screw Assembly, Single
    x
                

    This bleeder repair kit allows you to repair and salvage those calipers that have a damaged bleeder. Simply drill and tap the caliper to 1/8" pipe thread and install this replacement bleeder assembly.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines

  • Wilwood 200-7531 Superlite 1.75 Inch Caliper Piston
    Wilwood 200-7531 Superlite 1.75 Inch Caliper Piston
    x
                1.75" replacement piston for the Wilwood Superlite Series Calipers.
            
  • Brake Bias Adjuster
    $24.99
    Brake Bias Adjuster
    x
                Crank-type balance bar adjuster cable. Enables the driver to easily adjust the brake bias. For use with dual master cylinders. This adjuster has a 1' long flexible cable.
            
  • Brake Line Guard
    $9.99
    $12.99
    Brake Line Guard
    x
                This brake line guard for the Dynalite Single brake caliper is designed to mount off one of the two caliper mounting bolts. With this guard in place, it will help prevent a leaking or broken line from those unfriendly big chunks of mud or rocks.
            
  • Speedway Purple Proportioning Valve
    Speedway Purple Proportioning Valve
    x
                

    Allows easy adjustment of front-to-rear brake bias. Universal design works on all race cars. Has a 100 to 1500 psi range with up to 57 percent pressure reduction.

    Includes two 1/8"-27 NPT to 3/8"-24 inverted flare fittings (not pictured).

    Brake System Builder's Tip (Link) 

  • Pedal Mount Plate
    $14.99
    Product Rating: 5.00 Stars
    Pedal Mount Plate
    x
                

    A simple rigid steel mount for hanging your pedals. Fits all aluminum Wilwood, U.S. Brake, or Tilton brake/clutch pedals and master cylinders we sell.

  • Stainless Steel Single Brake Line Tube Clamps, Bag/12
    Stainless Steel Single Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • AFCO 7010-0010 Brake System 7/16 Banjo to 3 AN Fitting
    AFCO 7010-0010 Brake System 7/16 Banjo to 3 AN Fitting
    x
                

    Brake system fittings to complete your brake plumbing project.

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Winters Performance 3230-55 5 Bolt Lightweight Drive Flange
    Winters Performance 3230-55 5 Bolt Lightweight Drive Flange
    x
                Works only with hubs designed for a 5 bolt drive flange.
            
  • Braided Stainless AN 18 Inch Brake Line
    Braided Stainless AN 18 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • GN Brake Adpt Plate 8-7"BC
    $34.99
    GN Brake Adpt Plate 8-7"BC
    x
                Fits 8 bolt on 7" center rotors.  For use on GN rear hub, 910-48351-DIR, to permit attachment of brake rotors.
            
  • Speedway Disc Brake Residual Valve, 2 PSI, Purple
    Speedway Disc Brake Residual Valve, 2 PSI, Purple
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A residual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

    Our residual pressure valve features a distinctive purple anodized finish with 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only.

  • Rotor-Hat Bolt Set
    $3.99
    Rotor-Hat Bolt Set
    x
                Ultralight, 5/16-24 thread. Set of 8. With self-locking nuts.
            
  • Wilwood 130-2655 Forged Dynalite O-Ring Seal Kit, 1.75 Inch
    Wilwood 130-2655 Forged Dynalite O-Ring Seal Kit, 1.75 Inch
    x
                

    Replacement parts for Wilwood Forged Dynalite calipers.

  • 3/8 Inch or 10mm Crush Washers, 5/Pk
    3/8 Inch or 10mm Crush Washers, 5/Pk
    x
                Crush washers come 5 in a package.
            
  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Speedway Grand National Rear Hub Kits
    $189.99
    $229.99
    Speedway Grand National Rear Hub Kits
    x
                Grand National rear hub kit available with 5 on 4-3/4" or 5 on 5" wheel bolt patterns.
            
  • AFCO 2012-2055 Master Cylinder Boot
    AFCO 2012-2055 Master Cylinder Boot
    x
                

    Master cylinder replacement/repair parts for AFCO single piston aluminum master cylinders.

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

     

  • Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    x
                We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.  

    Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

    Axle Flange Identification Chart (Link)

  • Speedway Steel Drive Flange Kit, 5-on-5 Inch and 4-3/4 Inch
    Speedway Steel Drive Flange Kit, 5-on-5 Inch and 4-3/4 Inch
    x
                
            
  • TCI Automotive 861200 Electric Brake Shut-Off Valve
    TCI Automotive 861200 Electric Brake Shut-Off Valve
    x
                
    • For dirt track racing applications
    • Instantly shuts-off right front brake for improved corner entry handling and changing track conditions
    • Mounts directly into the brake line, anywhere between the master cylinder and caliper
    • A flip of the switch from the inside of the car by the driver activates the lightweight 6061-T6 aluminum encased, continuous duty solenoid
    • Solenoid blocks fluid flow to the right front caliper, eliminating the common “push or tight” condition experienced under corner entry braking
    • Compact design so it can be discretely mounted
    • Handles up to 3000psi
    • Incorporates a waterproof seal to handle frequent high pressure washings
    • Requires only a single amp of current
    • Works with all hydraulic brake systems, making it perfect for stock cars, modifieds and late models

    Instructions (PDF)

  • Speedway 1978-88 GM Metric Brake Pad Spacer
    Speedway 1978-88 GM Metric Brake Pad Spacer
    x
                

    Use Speedway brake pad spacers with .810" rotors and stock-style 1978-1988 GM calipers. Spaces brake pad out .242" from caliper piston.

    Note: Spacer has an o/d of 2.05" and as such is specific to a piston with an inside diameter to match the 2.05" spec. Please check caliper piston application and dimensions when purchasing.

  • Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    • Medium friction, low to medium temperarture range.
    • Good cold torque response.
    • Low to moderate wear rate

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

    8353991 Instructions (PDF)  

  • JOES Racing Products 25601 Front Spindle Split Hub Nut-Sprint & Midget
    JOES Racing Products 25601 Front Spindle Split Hub Nut-Sprint & Midget
    x
                These front spindle split hub nuts are designed for micro sprints.  They utilize a cinch bolt system to securely lock down your hub at any torque setting and are much more durable than plastic nylon nuts. These high-quality nuts come in a 1"-14 thread pattern.
    • Utilizes a cinch bolt system to securely lock down your hub at any torque setting
    • Much more durable than plastic nylon nuts
    • 1"-14 thread
  • 3/8 Inch-24 IFF Each End, 1/8 Inch NPT Female Center, Brass Adapter Tee
    3/8 Inch-24 IFF Each End, 1/8 Inch NPT Female Center, Brass Adapter Tee
    x
                IFF TEE male and female adapters
            
  • 1939-48 Ford Car Wheel Cylinders, Front
    1939-48 Ford Car Wheel Cylinders, Front
    x
                

    Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting, install corrosion resistant stainless steel sleeves with news pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.

    Features a 7/16"-20 straight thread inlet. To adapt to an AN# 3 brake line, use fitting # 617-4132 along with crush washer # 617-3513. Bleeder is threaded 3/8"-24.

  • 1978-Up GM Metric Brake Calipers, IMCA Approved
    1978-Up GM Metric Brake Calipers, IMCA Approved
    x
                

    These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

     

    • IMCA approved
    • No core charge required
    • 7/16"-20 inlet
    • Can be used with brake hoses from Pre-1978 GM intermediate cars
    • Brake pads & bolts sold separately

     

    Note: Does NOT include brake pads or slider bolts and bushings.

  • Speed Bleeder Bleed Screws, 10mm-1.5
    Speed Bleeder Bleed Screws, 10mm-1.5
    x
                

    The Speed Bleeder is a direct replacement for the bleeder assembly in your caliper. This makes brake bleeding truly a one-man operation. Simply "crack" the bleeder loose, pump the brakes, then close the bleeder. 

    Sold in pairs.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines. 

  • Wilwood High Volume Master Cylinder Rebuild Kits
    Wilwood High Volume Master Cylinder Rebuild Kits
    x
                

    Rebuild kit for Wilwood high volume master cylinders. Contains piston, seals, snap ring, push rod, lid gasket and replacement dust boot assembly. All parts necessary for maintenance and repair of your master cylinder.

  • Speedway External Bleeder Kit for GM Hydraulic Throwout Bearing 91025610
    Speedway External Bleeder Kit for GM Hydraulic Throwout Bearing 91025610
    x
                

    These quality bleeder kits are designed for use with our GM Stock Clutch Hydraulic Throwout Bearing (91025610).  They feature all lines, adapters, and fittings needed to successfully bleed your throwout bearing. 

    Kit includes:

    • 1/8" NPT bleeder
    • AN4 male to 1/8"NPT adapter fitting
    • 12" AN-4 stainless steel straight brake line
  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25