Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Brakes & Hubs At Speedway Motors

Speedway Motors has the racing brake components you need for the rigors of the oval track. We have top quality rotors, calipers, brackets and hubs, including lightweight wide 5 hubs. Our complete assortment of brake pads will help you tune your brakes to track conditions. Choose from a great selection of master cylinders and pedals, too, as well as the high temp brake fluid you need to keep your brakes performing under the harshest conditions.

"Oval Track, Brake Pedal Assemblies" Page 1 of 1

  • Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

    835-3401290 Instructions (PDF) 

     

  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

    Brake Pedal and Blanace Bar Instruction Guide (PDF) 

  • Wilwood 340-3342 Dual Brake/Clutch Pedal Assembly, Rev. Swing Mount
    Wilwood 340-3342 Dual Brake/Clutch Pedal Assembly, Rev. Swing Mount
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 6.25:1 ratio on both clutch and brake pedal.

    8353403342 Instructions (PDF) 

  • Garage Sale - CNC Series 224 Dual Cylinder Reverse Swing Mount Pedal Assembly
    Garage Sale
    Garage Sale - CNC Series 224 Dual Cylinder Reverse Swing Mount Pedal Assembly
    x
                CNC reverse swing mount dual cylinder brake pedal assembly.
    • Steel pedal arm
    • Large foot pad and High-grip rubber pedal pad
    • Pedal length available:
      • 12 1/4" for a 6:1:1 ratio
    This brake pedal is garage sale priced because it is different than what we currently offer.  This one is missing the balance bar.
     
     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     
  • Afco 6.25:1 Forward Mount Forged Aluminum Pedals
    Afco 6.25:1 Forward Mount Forged Aluminum Pedals
    x
                These forged aluminum forward mount pedals from Afco are top of the line in terms of quality and performance.  They feature ultra-strong upper mounts, a new rounded clevis design to prevent bias-bar lock-up at extreme limits of travel, and integral bias bearing stops to prevent lock-up when adjusting bias.
    • H-Beam forged aluminum pedal design
    • Ultra-strong upper mount has 52% less flex than the competition
    • Exclusive bias "tie-bar" adds strength and sets clevis spacing for proper master cylinder function
    • Ultra high strength bias bar; same strength of 7/16 bias bar in the traditional 3/8 size
    • Internal hex in bias bar eases bias set up
    • Four 1/4-20 auxiliary mounting posts for added rigidity
    • Extra coarse, industrial grade anti-skid foot pads
    • 4.36 lbs
    • 6.25:1 pedal ratio
  • 1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1933-1934 Ford. The master cylinder has been remanufactured and is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31933 Instructions (pdf) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.  

  • Wilwood 340-11295 Adjustable Dual Pedal, Fwd. Swing Mount - 6.25:1
    Wilwood 340-11295 Adjustable Dual Pedal, Fwd. Swing Mount - 6.25:1
    x
                Wilwood’s new Adjustable Mount Pedal assembly  combines the brake  and clutch pedals together in one unit and positions  the master  cylinders inside the firewall, away from engine heat.
    • All aluminum frame
    • Forged aluminum pedal arms with ladder style construction
    • Adjustable pads allow fine-tuning of the pedal location and clearance.
    • 6.25 to 1 pedal ratio
    • Includes: mounting studs, hardware, new clevis and pivot pin balance bar assembly
    Instructions (PDF)

    Data Sheet (PDF)

  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Brake Pedal Mount
    $9.99
    Brake Pedal Mount
    x
                
    • 1/8" Steel
    • (6) 3/8" Holes
    • 1/2" from center to center holes
    • 4-3/4" top to bottom
    • 2-5/8" from bend to edge of part
  • Wilwood 340-5181 Rev. Swing Mount Dual Master Cylinder Brake Pedal
    Wilwood 340-5181 Rev. Swing Mount Dual Master Cylinder Brake Pedal
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    835-3405181 Instructions (PDF)

  • Wilwood 340-11299 Adjustable Dual Pedal, Rev. Swing Mount - 6.25:1
    Wilwood 340-11299 Adjustable Dual Pedal, Rev. Swing Mount - 6.25:1
    x
                Wilwood’s new Adjustable Mount Pedal assembly  combines the brake and clutch pedals together in one unit and positions  the master cylinders inside the firewall, away from engine heat.
    • All aluminum frame
    • Forged aluminum pedal arms with ladder style construction
    • Adjustable pads allow fine-tuning of the pedal location and clearance.
    • 6.25 to 1 pedal ratio
    • Includes: mounting studs, hardware, new clevis and pivot pin balance bar assembly

    Reverse Mount Dual Pedal Assembly Installation Instructions (PDF)

    Wilwood Spec Sheet 

    Data Sheet (PDF)

  • Garage Sale - Titanium Rail Brake Pedal, Standard
    Garage Sale
    Garage Sale - Titanium Rail Brake Pedal, Standard
    x
                

    Saves weight with this titanium brake pedal. Made for both raised rail or standard rail cars.

    • Measures 13.75" from center of mounting hole to bottom of the pedal
    • Measures 2.25" from mounting center to where the master cylinder attaches
     
    This is garage sale priced because it is a 1/2" shorter than normal. 
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Wilwood 340-1285 Dual Master Cylinder Floor Mount Brake Pedal, 6:1
    Wilwood 340-1285 Dual Master Cylinder Floor Mount Brake Pedal, 6:1
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. With a 6.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    835-3401285 Instructions (PDF)

  • Wilwood 340-4828 Dual Brake/Clutch Pedal Assembly, Rev. Swing Mount
    Wilwood 340-4828 Dual Brake/Clutch Pedal Assembly, Rev. Swing Mount
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 5.1:1 ratio on both clutch and brake pedal.

  • Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 

    • Floor mount assembly
    • Has a 6:1 pedal ratio
    • Includes brake balance bar

    910-29976 Instructions (PDF)

    910-29976 Specs Sheet

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 340-1287 Dual Master Cylinder Swing Mount Brake Pedal, 7:1
    Wilwood 340-1287 Dual Master Cylinder Swing Mount Brake Pedal, 7:1
    x
                

    This popular swing mount pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7.00 to 1 pedal ratio.

    835-3401287 Instructions (PDF)

  • Garage Sale - Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    Garage Sale
    Garage Sale - Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    x
                Please view the product's page for more information
            
  • Pro-System Brakes PEY.100410 Billet Aluminum Forward Mount Brake Pedal
    Pro-System Brakes PEY.100410 Billet Aluminum Forward Mount Brake Pedal
    x
                
    • Integrated trunion type balance bar
    • Provides precision bias adjustment
    • Zero unwanted lateral or vertical movement
    • Provides more consistent driver feel
    • Direct replacement for Wilwood pedals
    • 6.2:1
  • Pro-System Brakes PEY.100411 Billet Aluminum Reverse Mount Brake Pedal
    Pro-System Brakes PEY.100411 Billet Aluminum Reverse Mount Brake Pedal
    x
                
    • Integrated trunion type balance bar
    • Provides precision bias adjustment
    • Zero unwanted lateral or vertical movement
    • Provides more consistent driver feel
    • Direct replacement for Wilwood pedals
    • 5.1:1
  • Afco 6.25:1 Reverse Mount Forged Aluminum Pedals
    Afco 6.25:1 Reverse Mount Forged Aluminum Pedals
    x
                These forged aluminum reverse mount pedals from Afco are top of the line in terms of quality and performance.  They feature ultra-strong upper mounts, a new rounded clevis design to prevent bias-bar lock-up at extreme limits of travel, and integral bias bearing stops to prevent lock-up when adjusting bias.
    • H-Beam forged aluminum pedal design
    • Ultra-strong upper mount has 52% less flex than the competition
    • Exclusive bias "tie-bar" adds strength and sets clevis spacing for proper master cylinder function
    • Ultra high strength bias bar; same strength of 7/16 bias bar in the traditional 3/8 size
    • Internal hex in bias bar eases bias set up
    • Four 1/4-20 auxiliary mounting posts for added rigidity
    • Extra coarse, industrial grade anti-skid foot pads
    • 4.36 lbs
    • 6.25:1 pedal ratio
  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection