Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is your number one source for racing how-to books, videos and DVDs. From suspension tuning and chassis setup to engine building and driving techniques, you can do it with a technical manual from Speedway!

Featured Products
Steve Smith Autosports S280 Book - IMCA Racing Technology
Steve Smith Autosports S280 Book - IMCA Racing Technology
x
            By Steve Smith. Everything a racer needs  to know to build, set-up and race the  modified competitively. Nine informative  chapters cover ares of design, suspension  systems, chassis set-up and adjustment.  120 pages. 
        
Track Set-Up Book
$15.99
Track Set-Up Book
x
            Spiral bound book with pages for set-up, lap times, tire temps, notes, etc.  62 pages. Record 28 different set-ups.
        
Steve Smith Autosports S283 Book - Trackside Chassis Tuning Guide
Steve Smith Autosports S283 Book - Trackside Chassis Tuning Guide
x
            
  • Steve Smith's instant reference guide to correcting a race car handling problem.
  • 3 1/2" x 7 1/2", slides right into your back pocket.

This tuning guide is completely laminated so it won't be ruined when you use it in the pits.

Steve Smith Autosports S298 Dirt Late Model Chassis Technology Book
Steve Smith Autosports S298 Dirt Late Model Chassis Technology Book
x
            Takes you through design, construction, suspension, set-up, theory and all other aspects of late model racing. 104 pages. 
        

"Oval Track, Books" Page 1 of 5

  • George Trosley's How To Draw Cartoon Cars
    George Trosley's How To Draw Cartoon Cars
    x
                George Trosley wrote the book on drawing cartoon cars.  Here it is.  188 pages of How to, step-by-step instructions gathered into a comprehensive collection.
            
  • Ford Flathead V8 Builders Handbook
    Ford Flathead V8 Builders Handbook
    x
                This book covers every facet of your Flathead Ford V-8. Rebuilding? Get one of these books! 200 images. 154 pages.
            
  • Holley 4150 and 4160 Carburetors Handbook
    Holley 4150 and 4160 Carburetors Handbook
    x
                By Mike Urich. Explains the basics of fuel inlet, idle, main metering, power,  accelerator pump, secondary and choke systems, and how to choose a carb based  on engine size.  Gives modifications and tuning and performance tips.  Also includes disassembly and repair section. 80 pages.
            
  • Book - Ford Steering
    $7.99
    Product Rating: 3.25 Stars
    Book - Ford Steering
    x
                

    One of our old school books. This book walks you through finding, rebuilding, adjusting and modifying a Ford steering box. 24 pages with 47 photos. 

    Covers 1928-1948 Ford cars, 1948-1952 F-1 trucks and 1953-1956 F-100 trucks. Also covers installing a F-1/F-100 steering box in an earlier frame.

  • Fast Company - Six Decades of Racers, Rascals and Rods, Book
    Fast Company - Six Decades of Racers, Rascals and Rods, Book
    x
                The 'Speedy' Bill Smith Story. If you know anything about 'Speedy' Bill, you can guess what's in this book. Over 350 pages total and 32 of them with pictures! You will read about the man, the business that he has built, the roads he's traveled and the people he has met. It's a hard back book.
            
  • Steve Smith Autosports S280 Book - IMCA Racing Technology
    Steve Smith Autosports S280 Book - IMCA Racing Technology
    x
                By Steve Smith. Everything a racer needs  to know to build, set-up and race the  modified competitively. Nine informative  chapters cover ares of design, suspension  systems, chassis set-up and adjustment.  120 pages. 
            
  • Steve Smith Autosports S282 Book - Sprint Car Chassis Technology
    Steve Smith Autosports S282 Book - Sprint Car Chassis Technology
    x
                        Page after page of technical information on understanding and adjusting the sprint car chassis, chassis set-up, and chassis alignment. Includes information on torsion bar and coil-over springs, stagger and tracking for wing and non-winged cars, on dirt or pavement. By Steve Smith. 103 pages.         
            
  • Book - Rebuilding the Famous Ford Flathead
    Book - Rebuilding the Famous Ford Flathead
    x
                By Ron Bishop. A step-by-step, easy to follow instruction manual for restoring Ford 1932-53 V-8 flatheads. Comprehensive instruction manual covers all the basics of rebuilding a flathead Ford.
            
  • Book/Manual - How To Swap GM LS-Series Engines Into Almost Anything
    Book/Manual - How To Swap GM LS-Series Engines Into Almost Anything
    x
                How to Swap GM LS-Series Engines into Almost  Anything shows how to fit these powerhouse engines into popular GM  F-Body cars, such as the Camaro and Firebird, and also how to install  these powerplants into non-GM muscle cars, sports cars, trucks, and of  course, hot rods. This book includes a historical review, complete  specs, and detailed information so you can select and fit the best LS  engine for a particular vehicle and application.

    A section on mounting kits, explaining how to install these engines into a variety of cars using readily available motor mount kits, universal engine mounts, or fabricated mounts. In addition, the book shows you how to perform necessary oil-pan modifications and adapt accessory drivers as well as choose the most suitable fuel pump, exhaust system, wiring harness, and electronic control module. This guide takes it a step further, revealing how to select the best reprogramming equipment and software for a vehicle and its application. Finally, the book covers the range of compatible transmissions for LS engines.
    • By Jefferson Bryant
    • 144 pages
    • Photos: 375 color
    • Paperback
    • Sold individually
  • Swindell Series Sprint Car Set-Up Sheets
    Swindell Series Sprint Car Set-Up Sheets
    x
                
    • Can be used if running a 305, 360 or 410 sprint car
    • 1 tablet contains 50 sheets
    • Easily organize your set-up notes for each race
    • Gives you a permanent record of every adjustment and set-up
    • Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
  • Book - How To Build Chevy Small Block Circle Track Engines
    Book - How To Build Chevy Small Block Circle Track Engines
    x
                This informative new engine building book explains how to understand the specific needs of your car and track, and how to build an engine to address them. Includes information on parts selection, machine work and assembly, with in-depth builds on three race engines.
            
  • Steve Smith Autosports S145 Book - Guide to Fabricating Shop Equipment
    Steve Smith Autosports S145 Book - Guide to Fabricating Shop Equipment
    x
                

    By John Block. Great information to help the average builder make his own equipment. Shows you how to fabricate:

    • Engine Stands
    • Sheet Metal Brakes
    • Hydraulic Presses
    • Engine Hoists
    • Rotating Chassis Fabrication Stands
    • Motorized Flame Cutters
    Full assembly instructions, materials list, and fully illustrated step-by-step directions. Steve Smith Autosports, 56 pages.
  • Book - How to Build High Performance Chevy LS1-LS6 V8s
    Book - How to Build High Performance Chevy LS1-LS6 V8s
    x
                The LS1/LS6 family of engines are quickly becoming the engine of choice for high performance street and race applications. Learn what it takes to build these engines right in this engine building book. 600 photos. 160 pages. 
            
  • Steve Smith Autosports S196 Book - Stock Car Dirt Track Technology
    Steve Smith Autosports S196 Book - Stock Car Dirt Track Technology
    x
                By Steve Smith. Covers every facet of  stock cars: chassis set-up, suspension,  tires, brakes and chassis construction.  Filled with tech tips. 143 pages. 
            
  • Book - 335 HP Flathead Ford V8 Performance Handbook
    Book - 335 HP Flathead Ford V8 Performance Handbook
    x
                This book by Joe Abbin will show you 'real' horsepower figures from 'real' Flathead Ford engines that were built and run on the dyno, the street and the dragstrip. Clearly shows each engine (naturally aspirated and supercharged) being built and dyno tested. 138 pages.
            
  • Motive Gear R7.5GR GM 7.5 In 10 Bolt Ring Pinion Install Kit-27 Spline
    Motive Gear R7.5GR GM 7.5 In 10 Bolt Ring Pinion Install Kit-27 Spline
    x
                Everything you need for a complete ring and pinion installation job. 

    Kit Includes:

    • cover gasket
    • crush sleeve
    • marking compound and brush
    • pinion and carrier bearings
    • pinion nut and washer
    • pinion seal
    • thread locking compound
    • sealer
    • side case and pinion bearings
    • pinion crush sleeve
    • seal and pinion nut
    • Also comes with lock tite and pattern marking compound and gasket.

    Note: Pinion-depth shims are not included. 

  • Book - Lone Wolf by Doug Wolfgang
    Book - Lone Wolf by Doug Wolfgang
    x
                

    Doug Wolfgang is one of the most celebrated and colorful sprint car drivers of all time. In this book, co-written with Dave Argabright, Wolfie tells his story in his own words, reflecting on his career and the sport of auto racing.

    Lone Wolf is pure Wolfgang - direct, honest, insightful and funny. It's a must-read for racing fans. Hardcover bound. 300 pages.

  • DVD Set - Be a Better Racer with Sammy Swindell
    DVD Set - Be a Better Racer with Sammy Swindell
    x
                "Be A Better Racer" with Sammy Swindell has been  designed to help racers at all levels achieve better results. This DVD  will give you the knowledge, tips and tricks to improve your program.  This video was created in an easy to understand format that will be  beneficial to the beginning or veteran racer. 

    The six videos will focus on everything from the basics, to the "secrets" that Sammy Swindell has developed and used to be one of the greatest racers in the history of motorsports. This is a no-nonsense approach in teaching the fundamentals of the sport. It focuses on the key areas and offers clean, concise explanations of the material. Some of the topics to be covered in the class are:
    • Selecting the right equipment
    • Assembly and proper preparation
    • Set-Ups and racetrack adjustments
    • Weekly maintenance
    • Driver preparation
    • Driving techniques
    • Handling sponsors and more!
    Set includes 3 DVDs and a manual.
  • Track Set-Up Book
    $15.99
    Track Set-Up Book
    x
                Spiral bound book with pages for set-up, lap times, tire temps, notes, etc.  62 pages. Record 28 different set-ups.
            
  • Coolest Coloring Book Volume 2
    Coolest Coloring Book Volume 2
    x
                
    • 20 pages of hot choppers, UTV's, hot rods, and a chimp
    • The same style and detail you've come to expect from APOC & Alan Close
  • Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    x
                

    A step-by-step buildup of a Mustang Mini Stock project car. Provides detailed instruction on how to build you own race car.

    • Finding a suitable car
    • Stripping the car
    • Installing a roll cage
    • Working with a unibody chassis
    • Using a McPherson strut front suspension
    • Designing the front suspension geometry
    • Working with the stock 4-point rear suspension and coil springs
    • Complete race car fabrication and preparation
    • Complete chassis setup and alignment
    • Scaling the car and adjusting the weight
    • Chassis adjustments and troubleshooting
    • Ford 2300cc performance engine build-up
    • For dirt and paved tracks
  • Book - The Ins and Outs of Early Ford Transmissions
    Book - The Ins and Outs of Early Ford Transmissions
    x
                      Whether you are restoring an early Ford or building a period-correct hot rod, this book is for you. It covers all aspects of what to look for and expect when rebuilding the 1932-1950 Ford 3-speed tranny.

    Full of photos, drawings, part numbers, specifications and other impossible-to-find tips and knowledge. 63 pages. 
  • Racewise Suspension Geometry Software, Rear Suspension
    Racewise Suspension Geometry Software, Rear Suspension
    x
                Rear
    • Allows Roll and Bump or Rebound Suspension Movements
    • Use to Analyze All Popular Oval Track Coil Spring Rear Suspensions
    • Computes/Reports All Critical Rear Suspension Factors:
      -Drive Angle
      -Roll Steer
      -Indexing
      -Spring & Shock Travel
      -Lateral Axle Movement
      -5th Coil Trave/Axle Wrap
    • 3 years in-field development
    • Designed to trach suspension with specific hands-on lessons and includes fully illustrated handbook and help files
    • Realistic,on-screen, multi-angle suspension views
    • Provides immediate analysis of adjustments from simple to complex with numerical and graphical representations
    • Full, 3-Dimensional accuracy
    • Compatable with Windows 95, 98, ME, 2000, NT, XP, Vista, and 7
    • For all forms of racing!
  • Spring Assortment - 200 Piece
    Spring Assortment - 200 Piece
    x
                200 piece spring assortment. Comes with plastic case.
    • Multipurpose spring assortment
    • Compression & extension
    • 200 pieces
  • Vintage Interior Speedway Print
    Vintage Interior Speedway Print
    x
                

    Whether you're a longtime Speedway customer or simply a nostalgia buff, you'll love these vintage black and white Speedway prints showcasing the company's old "N" Street facility.

    The 16" x 20" images are printed on coated heavyweight paper and autographed by "Speedy" Bill.

  • Halibrand Champion Owners Manual
    Halibrand Champion Owners Manual
    x
                Thirty pages filled with complete details, illustrations and tips on all Halibrand Champion open tube rear axles. It includes exploded view illustrations and a list of replacement parts, plus helpful tips to prepare for installation, assembly, disassembly and maintenance.
            
  • Steve Smith Autosports S217 Book - The New Racers Tax Guide
    Steve Smith Autosports S217 Book - The New Racers Tax Guide
    x
                  One of Steve Smith's books.  A totally new, updated book.  It tells you how to legally subtract your racing costs from your income tax by running your operation as a business.  Step-by-step, how to do everything correctly.  Includes a complete discussion of racers' Tax Court cases (who has won, who as lost, and why).  An alternate form of funding your racing.  Read this book now and start saving.  79 pages.       
            
  • Book - Borg Warner Overdrive
    $14.99
    Book - Borg Warner Overdrive
    x
                The Borg Warner 'R' series overdrive transmission was offered as an option until the early 1960's in many cars. This book is one of our books that covers design, operating, troubleshooting, repair and wiring. 24 pages.        
            
  • Book - The Secret World of Race Car Sponsorships
    Book - The Secret World of Race Car Sponsorships
    x
                  Finally a great book on race car sponsorships written by a racer, for a racer. One of these books will take you from how to get a sponsor and more importantly, how to keep a sponsor. Well worth the money. 40 pages.    
            
  • Steve Smith Autosports S301 Book - Stock Car Racing Chassis
    Steve Smith Autosports S301 Book - Stock Car Racing Chassis
    x
                  By Steve Smith. Covers design, theory and construction. Explains shock & spring selection, caster/camber, sorting a chassis, and step-by-step construction of a Chevelle chassis. 33 pages.   
            
  • Book - Chevy Small Block Part Numbers and Casting Numbers
    Book - Chevy Small Block Part Numbers and Casting Numbers
    x
                A complete reference guide of casting numbers & part numbers. Covers  heads, blocks, cranks, intake & exhaust manifolds. From '55-'99.  94 pages.
            
  • Steve Smith Autosports S286 Book - Mini-Micro Sprint Racing Technology
    Steve Smith Autosports S286 Book - Mini-Micro Sprint Racing Technology
    x
                By Steve Smith. Covers frames, suspension, chassis, torque arms,  chassis alignment, tires, wheels, wings, parts and sources. Well  illustrated. 87 pages.
            
  • Steve Smith Autosports S203 Book - How To Build Trailers
    Steve Smith Autosports S203 Book - How To Build Trailers
    x
                

    This is a must have book if you are going to build your own open, flatbed trailer. Details on suspension and components, materials, all phases of construction, braking systems, couplers, electrical, design and fabrication, and accessories.

    We also have complete scale drawings for a flatbed tandem axle trailer with leaf springs and tire track. All material specifications and parts sources included.

  • Gear Head Holiday Cards
    $19.99
    Gear Head Holiday Cards
    x
                Stand out of the crowd this year! These unique holiday cards are printed on beautiful laid stock with a two color letterpress imprint 4" x 6" folded size. Blank inside ready for you to add your own greeting. Package of 10 cards and envelopes.
            
  • Book - America's Coolest Station Wagons
    Book - America's Coolest Station Wagons
    x
                For all of us who grew up watching the world pass  by from the back of a station wagon, this book touches a special chord.  The same cars many would never want to be seen in are now in high  demand, and it seems everyone has at least one great story involving a  station wagon. Anyone who is a fan of nostalgia can relate to the  subject matter, and for those who like vintage styling and modern  performance, there are plenty of great examples of upgraded vintage  wagons that can (and are) driven daily.

    Noted magazine writing veteran Scotty Gosson takes an informative and lighthearted look at the lowly station wagon. Long lauded as a family mover unworthy of respect, the vintage style and quirky functionality of old wagons is now finding favor with enthusiasts and baby boomers alike. Their unique shapes and smile-inducing purpose separates wagons from more typical vintage rides, and in modified or customized form, wagons take on an entirely different personality.

    Whether you're trying to make a statement or just wanted more space for family, friends, and luggage, this book is sure to make you smile and fondly reminisce time spent in the family wagon.
    • By Scotty Gosson
    • 144 pages
    • Photos: 416 color
    • Paperback
    • Sold individually
  • Book/Manual - How to Hook and Launch: Traction Mods for Street & Strip
    Book/Manual - How to Hook and Launch: Traction Mods for Street & Strip
    x
                Please view the product's page for more information
            
  • Welders Handbook
    $14.99
    $16.99
    Welders Handbook
    x
                

    By Richard Finch. Covers all types of welding, from gas welding and cutting to arc, MIG, TIG and plasma-arc welding and cutting. Tips on weld jigs and fixtures. How to weld mild steel, Chromoly, aluminum, magnesium and titanium. 170 pages.

  • Book/Manual - How to Rebuild & Modify Chevy 348/409 Engines
    Book/Manual - How to Rebuild & Modify Chevy 348/409 Engines
    x
                Chevy's W-series 348 and later the 409 became  legends on the street, and in particular the 409 also became a legend on  the track. In the early 1960s, these engines powered a variety of GM  vehicles and the Z11 Impalas at the drag strip. Recently, the 348s and  409s have enjoyed a high-performance renaissance and many speed  manufacturers are making heads, blocks, and virtually every part for  these engines.
    • By John Carollo
    • 144 pages
    • Photos: 259 color
    • Paperback
    • Sold individually
  • Book - How To Build Big-Inch Ford Small Blocks
    Book - How To Build Big-Inch Ford Small Blocks
    x
                Have you been dreaming about a little extra displacement for your Ford? By increasing the bore and stroke of your current engine, you can add those cubic inches without the hassle of switching to a big block. 
    George Reid thoroughly explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole. With this information, you’ll be better able to tailor your heads, cam, intake manifold, carburetor, and exhaust system to get the most out of the extra cubes.
    Also included in this engine building book is a complete guide to factory head and block castings, as well as aftermarket block and head guides, so you can choose exactly the right parts for your project. This book is the definitive guide for building a big-inch Ford small block, complete with four engine buildups ranging from 331 to 408 cubic inches.
  • Book - Racing Safely, Living Dangerously - Bill Simpson
    Book - Racing Safely, Living Dangerously - Bill Simpson
    x
                "The on-track stories are good, but the  off-track exploits are even better. Any stories involving famous racers  and South American brothers are worth the price of admission."

    "Bill Simpson with the Beatles, Bill Simpson the safety pioneer, Bill Simpson in handcuffs, Bill Simpson the racer, Bill Simpson crashing through a restaurant with his boat, Bill Simpson sets himself on fire and wins a court case, Bill Simpson tests his first drag chute and goes to jail via the woods..."

    Written by Bill Simpson himself with help from his friend and renowned motor-sports author, Bones Bourcier.
Goto Previous PagePrevious Page
1 2 3 4 5