Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ race car bodies and chassis components are second to none! Speedway has chassis and parts for IMCA Modifieds and other modifieds from top names like Jet Racing, Dirtworks/Harris and Speedway. With a wide selection of nose pieces and steel or aluminum body panels, it’s easy to get your race car looking sharp again. Don't forget about our huge selection of roll cages and bumpers for metric or mid-size chassis, too!

Featured Products
Speedway Aluminum Hot Rod Bomber Seat
From: $174.99
Product Rating: 5.00 Stars
Speedway Aluminum Hot Rod Bomber Seat
x
            Hand formed from .090" aluminum, this aircraft bomber style seat has a 20 degree lay-back design for increased comfort. Seat measures 16" wide and 21" tall. Measures 4-1/8" from the top of the side rail to the bottom of the seat.

Note: Seat mounting brackets are sold separately. They allow for approximately 6" of adjustment. No mounting holes have been drilled due to the unlimited number of possible combinations.

Monte Carlo SS Stock Car Nose
$99.99
$114.99
Product Rating: 4.50 Stars
Monte Carlo SS Stock Car Nose
x
            

Two-piece nose for your Monte Carlo SS.  Just the ticket for IMCA type stock cars.  Nose pieces available in black, white, yellow, red, Chevron (dark) blue, or orange. Sold in sets.

  • Length:  66"
  • Width:  10"
  • Height:  22"
Kirkey 68 Series Layback Containment Seat
Kirkey 68 Series Layback Containment Seat
x
            

Kirkey's new 68 Series full containment layback seat is designed for the short track racer who wants the added safety of a containment seat at a price they can afford. Designed using the same bottom that the Kirkey Lightweight Layback seat has for years assures this seat will fit in your car with ease. 

  • Constructed from TIG welded .100" thick 5052 grade aluminum. MIG welded inside for added strength
  • Unique design adds extra strength and keeps weight down
  • Designed to accommodate all head and neck restraints
  • Built in reinforced padded shoulder restraints
  • Reinforced vertically adjustable padded head restraint
  • Aluminum extrusion offset on perimeter of seat adds strength and keeps inside of seat smooth
  • Padded rib protectors for extra driver support
  • Contoured elongated bottom with extended leg supports and center leg separator
  • Accomodates six point seatbelts
  • Easy to install cover
  • 18 degree layback
  • Designed to replace your existing intermediate or lightweight seat
  • Head restraint designed for easy entry and exit  Available with Black, Red, Grey or Blue cover
  • Widths 14", 15", 15-1/2", 16", 17" and 18" 

Instruction Sheet

Seat Design Illustration

Scale Pad Storage Box
$249.99
Scale Pad Storage Box
x
            

These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs.  They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap. 

  • Holds up to 3000 lbs.
  • High-strength securing latches
  • Aluminum/steel corners and edges protect during transport
  • FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)

"Oval Track, Body" Page 1 of 17

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Longacre 65130 Black Door Bar Padding
    Longacre 65130 Black Door Bar Padding
    x
                

    Add another element of safety to your roll cage. This fire-resistant door bar padding will help protect you if you take a shot to the driver's door. Easy to attach using molded-in straps.

    • Height: 16-5/8"
    • Length: 39-3/8"
    • Thickness: 1"
    • Protect your left elbow, arm, hand and wrist
    • Made from fire resistant padding similar to our High Density roll bar padding but slightly softer
    • Saves you tons of time - no need to cut and fit several separate pieces
    • Mounts quickly with adjustable molded-in straps
    • Sharp looking too with a clean appearance
  • Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Maximum Downforce MD3 Late Model Nose Only
    Maximum Downforce MD3 Late Model Nose Only
    x
                

    The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Black, Red, Chevron Blue, Yellow or Orange.

    Graphics for Monte Carlo, GTO, Fusion or Charger sold separately.

  • MD3 LH Fender New Style
    From: $54.99
    MD3 LH Fender New Style
    x
                The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
            
  • AFCO 85125B 4-Gauge Panel w/ Oil Press, Water & Oil Temp, Fuel Press
    AFCO 85125B 4-Gauge Panel w/ Oil Press, Water & Oil Temp, Fuel Press
    x
                

    Precision built AFCO gauges will warn you of trouble before it becomes a problem. Designed to warn instantly, AFCO gauges feature built in warning lights and are illuminated for night use.

    • 4-1/2" panels
    • All gauges full 2-5/8" comp style
    • 5' wiring harness
    • Sending units included
    • Anodized black panels

    106-85125B Instructions (PDF)

  • Sprint Style Track T Fiberglass Nose
    Sprint Style Track T Fiberglass Nose
    x
                

    Nose piece measures 24" high, 23-1/2" wide and 23-1/2" deep. Fiberglass construction. Use with Sprint Style cast aluminum grille.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • Oil Cooler Scoop, Carbon Fiber Look, 7 Inch Wide x 11 Inch Deep
    Oil Cooler Scoop, Carbon Fiber Look, 7 Inch Wide x 11 Inch Deep
    x
                Dominator air scoop for oil coolers. Plastic carbon fiber "look."
            
  • Monte Carlo SS Front Bumper
    $79.99
    Monte Carlo SS Front Bumper
    x
                The two piece design saves you money in shipping!  Weld or bolt the halves together.  65" wide.  The center union pipe is approx. 7-3/4” long. The mounting pipes are 3-3/4“ long.
            
  • Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    x
                Dual anti-submarine strap measures 27" per side. Latch & Link, semi-adjustable. Offered in red, blue, or black. Designed for bolt-in installation.

  • Kirkey Mountable Shoulder Support, Right Side
    Kirkey Mountable Shoulder Support, Right Side
    x
                You can customize any standard Kirkey seat by bolting on these shoulder  supports. They can be easily installed on the Kirkey seats to make them  even safer and more comfortable. 

    They give increased side support to the shoulder under heavy cornering and in case of side impact.

    These side supports are made out of the same grade aluminum as the seat and are available in your color choice of purple, red, black or blue.

    Kirkey Seat Sizing Chart (GIF)

    Kirkey Seat Design Illustration (GIF)

  • Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Nose
    Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Nose
    x
                Speedway Motors offers a complete selection of classic Edmumds & Trosel Spring Sprint Car fiberglass body pieces.  All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • 25 Lb. Lead Ballast
    $59.99
    Product Rating: 5.00 Stars
    25 Lb. Lead Ballast
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • Butlerbuilt Sportsman Advantage Head and Shoulder Kits, 10 Degree
    Butlerbuilt Sportsman Advantage Head and Shoulder Kits, 10 Degree
    x
                

    The Sportsman ADVANTAGE Bolt-on Head and Shoulder Kit allows you to convert your high-back seat to a full containment seat. Compatible with any high-back seat.

    • Easy conversion of your highback seat to full containment
    • Short left and long right side head supports
    • Includes latest MaXgard technology which is flame retardant/oil & water resistant
    • .125 5052 grade aluminum
    • Completely TIG welded for added strength
    • Heavy duty shoulder supports made specifically for bolt-on application
    • Energy impact absorbing foam
  • KSE Sprint Wing Valve Tab
    $6.99
    KSE Sprint Wing Valve Tab
    x
                

    These tabs work with all slider valves. They are a weld-on steel bracket for your Sprint or Midget race car.

    • Weld-On
    • Works with all wing slider valves
    • Steel construction
    • KSE style factory chassis component
  • Auto Meter Liquid Filled 2 Gauge Panel
    Auto Meter Liquid Filled 2 Gauge Panel
    x
                

    All panels come with warning lights, senders and instructions.  Includes an easy to hook up wiring harness. 

     

  • Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    x
                

    These ratchet belts are available in right side, with steel adjusters.  Simpson's 5-point Sprint car latch and link ratchet restraint systems are SFI 16.1 certified and as always, made in the U.S.A.!

    • SFI 16.1 Certified
    • 5-Point Latch & Link
    • 2" over shoulders belt width
    • Steel Adjusters
    • Platinum Series
    • Fixed Left Side
    • Right Side Ratchet

    Speedy Tip:  Seat belts lose around 50% of their strength over a two year period due to the dirt, washing, and sunshine.  As a rule, seat belts should be replaced every two years.  Belts that have been through an accident should also be replaced due to the forces exerted on them.

  • Edmunds Modified Style and Trosel Spring Fiberglass Nose
    Edmunds Modified Style and Trosel Spring Fiberglass Nose
    x
                

    Speedway Motors offers a complete selection of classic Edmumds Modified Style & Trosel Spring Sprint Car fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • Longacre 46545 Stepper Motor Racing Gauge, Water Temp
    Longacre 46545 Stepper Motor Racing Gauge, Water Temp
    x
                The next generation in instrumentation
    • Use a small electronic motor that only turns a tiny fraction of a rotation to drive the pointer
    • More precise than the traditional mechanical instruments
    • 2-5/8”
    • Molded polycarbonate / ABS case
    • An electronic sensor is installed on the motor to drive the gauge - no oil or fuel in the driver’s compartment for added safety
    • Thru-the-dial LED backlights
    • Illuminated pointer
    • Quick & simple to install
    • 100-280 deg.
    Built-in Warning Lights – Ultra Bright 2 Stage LED
    • 2 set points are easily adjusted to your needs
    • 1st set point: LED illuminates
    • 2nd set point: LED flashes
    • 3rd set point: LED and gauge backlight flash

    Instructions (PDF)

  • Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    x
                Simpson bolt-in style lap belts wtih cam lock fastener. Available in red, blue, or black.
            
  • Monte Carlo SS Stock Car Nose
    $99.99
    $114.99
    Product Rating: 4.50 Stars
    Monte Carlo SS Stock Car Nose
    x
                

    Two-piece nose for your Monte Carlo SS.  Just the ticket for IMCA type stock cars.  Nose pieces available in black, white, yellow, red, Chevron (dark) blue, or orange. Sold in sets.

    • Length:  66"
    • Width:  10"
    • Height:  22"
  • Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Tail
    Vintage Edmunds & Trosel Spring Sprint Car Fiberglass Tail
    x
                Speedway Motors offers a complete selection of classic Edmunds & Trosel Spring Sprint Car fiberglass body pieces.  All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.  

  • Universal Aluminum Hinge
    $11.99
    Product Rating: 5.00 Stars
    Universal Aluminum Hinge
    x
                

    This universal aluminum piano hinge has a variety of uses on anything from race cars to T-buckets. Cut to fit.

    1-1/2" wide with 3/4" of flat each side of pin. Includes two 36" length hinges.

  • Speedway 2 Inch Heavy Duty Aluminum Spoiler
    Speedway 2 Inch Heavy Duty Aluminum Spoiler
    x
                Designed by Speedway Motors to withstand the demands of today's avid racer. Made from 0.063" thick aluminum, these spoilers meet 2014 IMCA Modified rules.
    • Designed specifically to meet 2014 IMCA Modified rules for cars utilizing a GM 604 crate engine
    • 2" height
    • 66" wide
    • Heavy gauge 0.063" aluminum
  • Speedway 4 Gauge Panel
    $159.99
    Speedway 4 Gauge Panel
    x
                This panel includes warning lights, sending units and hardware. The faces of this gauge are white.
            
  • Kirkey 41501V Vintage Class Bucket 16 Inch Seat Upholstery
    Kirkey 41501V Vintage Class Bucket 16 Inch Seat Upholstery
    x
                

    The perfect accessory to the Kirkey Vintage Class Bucket Seat. Features a unique vertical stitiching design for that true vintage seat look. Includes extra thick, high density foam on rib supports for added comfort and safety. 

     

  • MD3 RH Fender New Style
    From: $54.99
    MD3 RH Fender New Style
    x
                The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
            
  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • Body Bolt Kit - 10 Piece with Clips
    Body Bolt Kit - 10 Piece with Clips
    x
                This ten piece kit will allow removal of body panels for cleaning or maintenance while clips stay fastened to bracing brackets or panels.
            
  • Vintage Outlaw Style Sprint Car Fiberglass Hood
    Vintage Outlaw Style Sprint Car Fiberglass Hood
    x
                

    Speedway Motors offers a complete selection of classic Outlaw style sprint car fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A. 

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.

  • Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    x
                

    FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

    • For use on regulators or fuel rails with gauge ports
    • Direct mount 1/8” NPT fitting
    • 1.5” diameter gauge face
    • Not for use in passenger or driver’s compartments
  • Carbon Fiber Look Hoop Scoop
    $54.99
    Carbon Fiber Look Hoop Scoop
    x
                

    It may look like carbon fiber but it's actually made of plastic. For 14" air cleaners.

    Measures 19" wide, 14" long and 3-1/2" tall.

  • Longacre 44518 Stepper Motor Racing Gauges, 4 Gauge Panel
    Longacre 44518 Stepper Motor Racing Gauges, 4 Gauge Panel
    x
                The next generation in instrumentation
    • Use a small electronic motor that only turns a tiny fraction of a rotation to drive the pointer
    • More precise than the traditional mechanical instruments
    • Includes Oil Pressure, Water Temp, Oil Temp, & Fuel Pressure gauges
    • 2-5/8”
    • Molded polycarbonate / ABS case
    • An electronic sensor is installed on the motor to drive the gauge - no oil or fuel in the driver’s compartment for added safety
    • Thru-the-dial LED backlights
    • Illuminated pointer
    • Quick & simple to install
    Built-in Warning Lights – Ultra Bright 2 Stage LED
    • 2 set points are easily adjusted to your needs (critical oil pressure has 3 set points)
    • 1st set point: LED illuminates
    • 2nd set point: LED flashes
    • 3rd set point: LED and gauge backlight flash

    Instructions (PDF)

  • Sportsman Economy Fiberglass 13 Inch Seat
    Sportsman Economy Fiberglass 13 Inch Seat
    x
                

    Economy seats for roadsters, dune buggies and sports cars that may require a very narrow seat assembly. Lightweight universal style fiberglass seat. Upholstery sold seperately.

    • Bottom is flat
    • 24 degree layback
    • Seat bottom is 13"wide
    • Best suited for driver/passenger with 13" wide hip width
    • If wider seat bottom is required, other seats should be considered
  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Kirkey Seat Covers for 16 Inch 36 Series Intermediate Seats
    Kirkey Seat Covers for 16 Inch 36 Series Intermediate Seats
    x
                

    These are brand new seat covers for Kirkey 36 Series Intermediate aluminum racing seats that are 16 inches wide. Upholstery is double stitched around belt openings and all stress points. They come in four different colors: Black, Blue, and Red.

  • Ballast Weight Clamps
    $11.99
    Product Rating: 4.00 Stars
    Ballast Weight Clamps
    x
                Used for mounting weight or other components to frame. Aluminum brackets are anodized black and tapped for a 1/2"-13 bolt (not included). Options of 1 1/4", 1 1/2", 1 3/4" round or 1-1/2" and 2" square.
            
  • Billet Car Hood Prop
    $54.99
    Billet Car Hood Prop
    x
                Billet stops hold your hood up while doing service work. With a little imagination can be used for hinges also.  
    • Hinge measures 17-1/2" overall length from tip to tip at mount hole centers
    • Center pivot to mount hole centers at end are 8.75"
Goto Previous PagePrevious Page
1 2 3 4 5 ... 17