Speedway Motors’ race car bodies and chassis components are second to none! Speedway has chassis and parts for IMCA Modifieds and other modifieds from top names like Jet Racing, Dirtworks/Harris and Speedway. With a wide selection of nose pieces and steel or aluminum body panels, it’s easy to get your race car looking sharp again. Don't forget about our huge selection of roll cages and bumpers for metric or mid-size chassis, too!
Kirkey's new 68 Series full containment layback seat is designed for the short track racer who wants the added safety of a containment seat at a price they can afford. Designed using the same bottom that the Kirkey Lightweight Layback seat has for years assures this seat will fit in your car with ease.
- Constructed from TIG welded .100" thick 5052 grade aluminum. MIG welded inside for added strength
- Unique design adds extra strength and keeps weight down
- Designed to accommodate all head and neck restraints
- Built in reinforced padded shoulder restraints
- Reinforced vertically adjustable padded head restraint
- Aluminum extrusion offset on perimeter of seat adds strength and keeps inside of seat smooth
- Padded rib protectors for extra driver support
- Contoured elongated bottom with extended leg supports and center leg separator
- Accomodates six point seatbelts
- Easy to install cover
- 18 degree layback
- Designed to replace your existing intermediate or lightweight seat
- Head restraint designed for easy entry and exit Available with Black, Red, Grey or Blue cover
- Widths 14", 15", 15-1/2", 16", 17" and 18"
From the first manufacturer to offer full containment seats comes a new option which offers all of the same protection for a fraction of the cost. The E-Z line features the same quality, rigidity, and safety aspects you need to compete at the highest level. The head and shoulder supports are covered with CarbonX® material and sized to fit a wide range of driver builds and profiles. Choose from four sizes, black upholstery only.
- 10° layback with no assembly required
- Solid head surround and shoulder support system
- Black velour rib cover and seat bottom upholstery
- Four standard sizes: 14.5", 15.5", 16.5", and 17.5"
Stepper motor techometers use a small electric motor to drive the pointer. It is more precise than the more common 'aircore' instruments whose accuracy can be affected by the windings. Many professional race teams - NASCAR™, etc. – are switching to this style of tach for the improved accuracy and response.
- Maximum RPM recall - Just push the Recall button
- High RPM Warning light - 2 stage - First warning can be set for just over your normal maximum RPM, the second stage at the redline. You get a warning of too many revs before you blow an engine. Can also be used as a 2 stage shift light.
- LED back light - Back light shows through the dial face PLUS the pointer is LED illuminated to make this the easiest tach to read - and super sharp looking too
- Stepper motor precision tach at an affordable price
- Brand: AccuTech™ SMi™
- Style: Stepper Motor
- Range: 0-10K RPM
- High RPM Warning Light: 2 stage
- 4-1/2" Diameter
- Face Color: Silver/Black
- Bezel Color: Silver
- White or Blue backlight
- Pointer Color: Red LED illuminated
These sharp looking contemporary aluminum gauge panels bring style and reassurance to your cockpit. They feature viscous damped pointers, for steady, accurate readings, with a new, cleaner, easier to read dial face and a new focused-view bezel. All gauge panels are pre-wired with 'Fat' wiring and soldered heat-shrink terminals.
- Gauges have CNC machined brass gears
- Industry standard fittings and connections
- 2-5/8" mechanical gauges with back lights
- Warning lights and all senders are included
- 1/8" NPT on the Gauge Panel
- Bias Gauge comes with 1/8" to 3/8-24 inverted flare adapters
- Brand: AccuTech™ Sportsman™
- Style: Analog
- Type: Mechanical
- Size: 2-5/8" diameter
- Face Color: Silver
- Bezel Color: Silver
- Pointer Color: Red
- Oil Pressure Included: Yes
- Oil Pressure Range: 0-100 psi
- Water Temperature Included: Yes
- Water Temperature Range: 100°-280° F
- WT Capillary Tube Length: 6'
- Oil Temperature Included: No
- Fuel Pressure Included: No
- Tachometer Included: No
- Gauge Backlights: Yes
- Backlight Replacement Bulb: #53
- Quantity: 2
- Material: Aluminum
- Dimensions: 8-1/4" x 3-1/2"
- Warning Lights Included: Yes
- Warning Lights Replacement Bulb: #194
- Senders Included: Yes
- Wiring Included: Yes
"Oval Track, Body" Page 1 of 17
$84.99More InfoLongacre 65130 Black Door Bar Paddingx
Add another element of safety to your roll cage. This fire-resistant door bar padding will help protect you if you take a shot to the driver's door. Easy to attach using molded-in straps.
- Height: 16-5/8"
- Length: 39-3/8"
- Thickness: 1"
- Protect your left elbow, arm, hand and wrist
- Made from fire resistant padding similar to our High Density roll bar padding but slightly softer
- Saves you tons of time - no need to cut and fit several separate pieces
- Mounts quickly with adjustable molded-in straps
- Sharp looking too with a clean appearance
From: $54.99More InfoMD3 LH Fender New Stylex
The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
$59.99More Info25 Lb. Lead Ballastx
Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing.
$99.99$114.99More InfoMonte Carlo SS Stock Car Nosex
Two-piece nose for your Monte Carlo SS. Just the ticket for IMCA type stock cars. Nose pieces available in black, white, yellow, red, Chevron (dark) blue, or orange. Sold in sets.
- Length: 66"
- Width: 10"
- Height: 22"
$11.99More InfoUniversal Aluminum Hingex
This universal aluminum piano hinge has a variety of uses on anything from race cars to T-buckets. Cut to fit.
1-1/2" wide with 3/4" of flat each side of pin. Includes two 36" length hinges.
$9.99More InfoBody Bolt Kit - 10 Piece with Clipsx
This ten piece kit will allow removal of body panels for cleaning or maintenance while clips stay fastened to bracing brackets or panels.
$54.99More InfoCarbon Fiber Look Hoop Scoopx
It may look like carbon fiber but it's actually made of plastic. For 14" air cleaners.
Measures 19" wide, 14" long and 3-1/2" tall.
$11.99More InfoBallast Weight Clampsx
Used for mounting weight or other components to frame. Aluminum brackets are anodized black and tapped for a 1/2"-13 bolt (not included). Options of 1 1/4", 1 1/2", 1 3/4" round or 1-1/2" and 2" square.
$2.99More InfoExtra 1-3/4 Inch Tubing for Roll Cagex
All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. Tubing is pre-notched where needed for easy assembly. Some notching is still required.
We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage!
The kit also includes:
- 1-3/4" diameter .104 wall HREW 1020 mild steel tubing
- Some notching is required
$39.99More InfoUniversal Modified Body Mounting Kitx
Consists of 6 pieces of 1" x 1/8" x 36" flat aluminum strap AND 4 pieces of 1/8" thick 1" x 1" x 60" angle aluminum.
$49.99More InfoAuto Meter 3357 Transmission Temperature Gaugex
$7.99More InfoSteel Hood Pin Kit with Q-Clipsx
Hood pin kit contains two 1/2" chrome plated steel studs, two steel scuff plates, four nuts, and two flip-over Q-clip pins.
$69.99More Info1981-1988 Monte Carlo SS Steel Quarter Panelx
1981-1988 Monte Carlo SS Stock Car body lower quarter panels are made of real steel. Specify left or right.
- 25 gauge.
- 24-5/8" tall at the front with 11-1/4" across the bottom to the front of the wheel well.
- 18-1/2" tall at the rear with 25-7/8" across the bottom of the quarter panel
- Overall length of the top is 65-1/2"
- Provided as painted white, please note picture shown in black for website picture illustration only.
910-54270 Instructions (pdf)
Note: These are not OEM panels - They are fabricated for offroad, circle track racing only.
$48.99More InfoDominator Windshield - Smokedx
It's never fun to get nailed by a rock or clump of mud. Made of Lexan, these are scratch resistant. Shipped flat, hardware not included.
$19.99More InfoButlerBuilt BBP-7020 NACA Ductx
- Air management duct that is great for air direction to pressurize or cool specific areas
- Paintable black plastic with 3” outlet, 10 1/2" long, 2 3/4" to 6" wide, 4 1/8" deep
- Computer aided design provides optimum aerodynamic shape for smooth, uninterrrupted air flow
- Can be installed on body panels to direct cool outside air to brakes, oil coolers, helmet, etc.
- Uses 3" hose
$11.99More InfoHood Saver Protective Clear Hood and Body Tape, 12 Ft. Rollx
Hood Saver is the world's finest transparent protective tape. This multi-purpose, waterproof super clear tape protects painted body parts and chrome from rock chips, tar and bugs. Hood Saver tape is easy to apply and remove. Provides an invisible protective film that is safe for all painted surfaces.
Comes in a 12 ft long roll that is 5" wide.
$3.99More InfoSeat Belt Installation Kitx
Don't jeopardize your safety with a hodge-podge of hardware store pieces. This kit is specifically engineered to securely mount your seat belts.
- (2) 7/16"-20 x 1-1/2" SAE fine thread bolts
- (2) 7/16"-20 nuts
- (2) lock washers
- (2) 2.44" O.D. large flat 11-gauge washers
$29.99More InfoKirkey Mountable Head Supports, Right Sidex
You can customize any standard Kirkey seat by bolting on these head supports. They can be easily installed on the Kirkey seats to make them even safer and more comfortable. They give increased side support to the head under heavy cornering and in case of side impact.
These side supports are made out of the same grade aluminum as the seat and are available in your choice of purple, red, black or blue.
$114.99More InfoMonte Carlo SS Rear Bumper Coversx
Two-piece rear bumper cover for your Monte Carlo SS. Just the ticket for IMCA type stock cars. Rear tail pieces available in black, white, red, yellow or Chevron blue. Sold in sets.
Graphics and decals sold separately.
$315.99More InfoWilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1x
Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.
Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.
- Combines the brake & clutch pedals into one unit
- Positions M/C inside the firewall away from engine heat
- Aluminum frame & arm construction
- Steel pivots & mounting studs
- Anti-skid pedal pads
- Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
- Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment
910-29974 Instructions (PDF)
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
From: $174.99More InfoSpeedway Aluminum Hot Rod Bomber Seatx
Hand formed from .090" aluminum, this aircraft bomber style seat has a 20 degree lay-back design for increased comfort. Seat measures 16" wide and 21" tall. Measures 4-1/8" from the top of the side rail to the bottom of the seat.
Note: Seat mounting brackets are sold separately. They allow for approximately 6" of adjustment. No mounting holes have been drilled due to the unlimited number of possible combinations.
$19.99More InfoSpeedway 2 5/8 Inch Water Temperature Gaugex
Lightweight 2 5/8” Speedway gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlit, white face makes these gauges easy to read from 100° – 280° F.
Also included with the gauge is a mounting bracket with all necessary hardware, 6ft. capillary tube, sending unit adapter, and complete installation instructions.
910-65016 Instructions (PDF)
$6.99More InfoBody Savers, .433 Inch Hole, 10/Bagx
- Extend the life of your fiberglass body parts by eliminating ovaling
- Mount using 1/8" rivets
- 430 Stainless steel
- .433" diameter
- Pack of 10
$69.99$77.99More InfoAuto Meter 2301 3-3/4 Inch 8000 RPM Tach, Chromex
These 3-3/4" diameter Autogage Series tachs by Auto Meter have a 8000 RPM range and include a backlight. Also includes a pedestal mount which can be mouted to your steering column or any flat surface. Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions.
Tach Wiring Guide (GIF)
$11.99More InfoKirkey 99020 Lumbar Supportx
High density padding gives added support to lower back area.
$87.99More InfoLongacre 50888 Air Density Gaugex
Get precise carb jetting every race! This gauge from Longacre helps you set air/fuel ratios to compensate for changes in barometric pressure and air temperature. As air density changes with weather conditions, you should rejet your carb to keep to horsepower and sharp response.
Comes complete with case and jetting chart. 2-1/4" gauge face, 2-7/8" bezel O.D.
Cannot ship by air.
$19.99More InfoClip-In Conversion Kitx
Convert your harness from bolt-in to clip-in with this kit. All heavy duty hardware and snap hook. Two bolts, two washers, two clips.
- Shank diameter is .434 or 7/16 X 20 threads per inch
- Shank thread length is approximately 1 5/8"
- Overall length including the eye is 3 1/8"
- Washer diameter is 2 1/2" with 7/16" hole
- Fits 2 inch wide belts
$44.99$49.99More Info1970-1981 Camaro Front Bumperx
Camaro Front Bumper fits 1970-81 Camaro nose. 2" x 2", .083 steel tubing.
$94.99More Info1981-1988 Monte Carlo SS Steel Front Fenderx
1981-1988 Monte Carlo SS Stock Car body panels are made of real steel. Choose left or right hand side when ordering a front fender.
Note: These are not OEM panels - They are fabricated for offroad, circle track racing only and provided in a black color finish only.
$23.99More Info5-Panel Racing Wide Angle Rear View Mirror, 35 Inch Widex
Increase your side and rear vision by more than 300% with these wide angle rear view mirrors. Features 5 glass mirrors strategically positioned to maximize your rearward view.
This racing rear view mirror includes adjustable brackets for easy mounting onto your roof or rollcage.
$44.99More InfoSportsman Seat Upholstery Kitx
Rugged black vinyl quilted upholstery for Sportsman economy fiberglass seat 900-7006.
$69.99More InfoDominator Formed Rockguard Panelsx
These universal fit rock guards are constructed from high-density fiberglass to withstand abuse from dirt, mud and rocks. Large size with extra material makes it easy to mate with any chassis configuration.
- Formed high-impact polymer rockguard
- Universal fit
- 24" W x 18" D
- 3" or 4.5" heights
- Available in Black or White
$49.99More InfoLexan Decal Protection Kitx
Protect your decals or wrap. Includes three 4" x 72" Lexan panels.
$69.99More Info1970-81 Upper Camaro Nose, Plasticx
1970-1981 Camaro racing nose. For street stocks and sportsman-type chassis. Upper piece. Black only. This nose piece is made of plastic.
$64.99More InfoTempered Spring Steel, 40 Ft.x
- Hardened and tempered
- 40' roll
- 1" Wide
- .062" Thick
- Great for making body braces
$69.99More Info1981-1988 Monte Carlo SS Steel Door Skinx
These 1981-1988 Monte Carlo SS stock car racing body panels are made of 22 gauge steel. These are not OEM panels - they are fabricated for offroad, circle track racing only. Specify left or right side when ordering these door skins.
Overall measurements are 62" x 26". These door skins are white in color, but are pictured black on our website.
$254.99$279.99More InfoKirkey 99300 Molded Foam Seat Insert Kitx
- Designed to add form fitting high-density padding to the bottom and lower lumbar of your current seat
- Includes everything you need in this kit
- Kit is designed to be used with a seat that fits the driver properly as is
- If your seat is too large for you already you will need to purchase a second kit
$14.99$16.99More InfoSpeedway Fender Coverx
Protect your fenders. Pressure laminated, one piece vinyl construction. Back is a resilient, embossed rubber that is resistant to gasoline, grease and other solvents. Big size 40" x 26".
$249.99More InfoScale Pad Storage Boxx
These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs. They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap.
- Holds up to 3000 lbs.
- High-strength securing latches
- Aluminum/steel corners and edges protect during transport
- FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)
$19.99More InfoSpeedway 2 5/8 Inch Oil Temperature Gaugex
Lightweight 2 5/8” Speedway Motors gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 100 – 280 deg. F. Also included with the gauge is a mounting bracket with all necessary hardware, 6ft. capillary tube, sending unit adaptor, and complete installation instructions.