Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in circle track racing carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and aFe Power. Whether you run alcohol or gas, Speedway can fuel your need for speed!

Featured Products
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
x
            

This Jet Performance Products 500 CFM 2GC carb is modified specifically for circle track racing. This Rochester carb complies with the IMCA rules. They are arguably the best OEM production two barrel carburetor for use in circle track racing.

  • .135 needle and seat to ensure adequate fuel and supply
  • Idle, transition, and accelerator pumps are modified
  • 1-11/16" bore, 1-3/8 venturi
  • Uses Holley jets (comes equipped with size #74)
  • 5/8-18" inverted flare fuel inlet
  • 2.008" x 3.695" mount pattern w/ .351" mount holes
  • No choke mechanism
  • Modified cluster to keep fuel curve correct throughout the RPM range
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
x
            

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

This tank features a fuel outlet that is 3" from the end opposite the filler neck.

Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
x
            This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

Features:
  • Choke delete
  • Choke horn remains
  • 50cc accelerator pump
  • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
  • The mandated carbs for many oval track racing sanctioning bodies
  • Calibrated specifically for circle track use

"Oval Track, Air and Fuel Delivery" Page 1 of 25

  • AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    x
                AFCO Throttle Rod Components
            
  • Aluminum Flare Union Adapter Fitting, Black, -10 AN
    Aluminum Flare Union Adapter Fitting, Black, -10 AN
    x
                

    Aluminum 37° flare AN union fitting. Black anodized finish will give your engine compartment the look you are after.

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    x
                These Sprint racing bell cranks come complete with a sealed bearing for  smooth action.  Multiple adjustment holes give you the ability to make it the part that works.  Anodized 6061 T6 Aluminum.
    • CNC-machined
    • Anodized black aluminum
    • Measures 2-7/16" and 3-9/16" from the center of the bearing to the end of the arms
    • Has .246" I.D. bearing
    • Bearing O.D. is .630"
    • Overall Length: 4.37"
    • Overall Thickness: .17"
    • Hole Diameter: .19"
  • Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain. Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters. Lighter and more affordable than stainless steel, these electoless nickel plated aluminum pieces combine great corrosion resistance with a neutral color and classy appearance.

    Aluminum pipe thread to 37° AN adapter fitting with a 90° bend.

    Fitting Thread Application Chart (GIF)

  • Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adaptors connect 1/2" pipe to straight -12 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -12 AN to 1/2" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    x
                Specially designed for IMCA Modified type motors. Only 3 1/4" diameter and works with gas or alcohol. 100 gph. Includes AN 10 inlet and AN 8 outlet. Includes pump, pulleys, mount bracket, drive mandrel and Gilmer drive belt. Mounts to Small Block Chevy block. Block pump mount.
            
  • Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 8 male on one end; AN 8 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • AIRAID 700-410 Cone Air Cleaner Filter Assembly, 3 Flange, 9 Inch Long
    AIRAID 700-410 Cone Air Cleaner Filter Assembly, 3 Flange, 9 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 3"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 9"
  • Willys Carbs WCD251 2-Barrel Throttle Stop, Return Spring Bracket
    Willys Carbs WCD251 2-Barrel Throttle Stop, Return Spring Bracket
    x
                
    • Fits 4412 style 2 bbl. carburetors
    • Throttle stop and return spring bracket all in one
  • Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aluminum -12 AN Female to -8 AN Male Reducer Fitting
    Aluminum -12 AN Female to -8 AN Male Reducer Fitting
    x
                

    Aluminum female to male adapter for 37° AN fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Sure Seal Air Cleaner Base Only, 14 Inch
    Sure Seal Air Cleaner Base Only, 14 Inch
    x
                

    Speedway's Sure Seal air cleaner base is manufactured from spun aluminum. Fits Holley carbs. Uses standard 14" diameter filters, sold separately. Minimum filter height required is 4".

    • Base has a 1-1/2" drop
    • Distance from the carb neck to top with .5" spacer and 4" filter = 4.25"

     

  • AFCO 40294 Ball Bearing Throttle Pedal, 15 Degree
    AFCO 40294 Ball Bearing Throttle Pedal, 15 Degree
    x
                

    Now AFCO control begins with the right foot. AFCO has re-engineered one of the most fundamental components of the race car to provide greater precision, improved comfort and more driver control than ever. Fully sealed bearings, double splined shaft and adjustable angle on the throttle lever means secure adjustability in a maintenance free package. 

    This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control. 

    • Double splined shaft
    • Fully sealed bearings
    • Durable anodized finish
    • Mounting instructions and tuning guide included

    106-40294 Instructions (PDF)

  • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    x
                

    Gasoline, methanol, ethanol, and dieselfuel compatible for fuel injected applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • One -6AN inlet and one -6AN return port in-line
  • Aluminum Straight Thread Fitting Plug, Black, -8 AN
    Aluminum Straight Thread Fitting Plug, Black, -8 AN
    x
                

    Aluminum male straight thread plug with O-ring seal for AN fitting. Black anodized finish.

    Fitting Thread Application Chart (GIF)

  • Black 45 Degree -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black 45 Degree -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN flare adapter fitting with a 45° bend. Black anodized finish will give your engine compartment the look you are after.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Speedway Washable Air Filter Element, 14 x 5 Inch
    Speedway Washable Air Filter Element, 14 x 5 Inch
    x
                Why keep buying paper elements when this one could last a lifetime? These filter elements feature a multi-layer cotton gauze material which is 100% washable and reusable. Use appropriate filter cleaner and filter oil at every service.
            
  • Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    x
                

    The Edelbrock Victor Series intake manifolds have set the standard for quality and performance in the racing industry. The Victor Jr. 302 is designed for Ford 260-289-302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads.

    The Victor Jr. 302 has no rear water crossover. Port exit size at cylinder head is 1.90" x 1.08" with enough extra material to open it up to 2.10" x 1.18".

    325-2921 Instructions (PDF)

  • AFCO 40291 Tube-Style Firewall Mount Gas Pedal
    AFCO 40291 Tube-Style Firewall Mount Gas Pedal
    x
                Popular style steel tubular design, mounts to firewall and utilizes a positive return.  
            
  • Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    x
                

    Compact design offers weight savings over full size filter. Comes with stainless steel high-flow element. Can be cleaned and reused. Black anodized aluminum housing. Will handle fuel injection. NOT compatible with ethanol (E85)or high pressure diesel.

    Available with AN6, AN8, AN10 or AN12 inlet/outlet.

  • AFCO 10176-24 Throttle Rod, 24 Inch Long
    AFCO 10176-24 Throttle Rod, 24 Inch Long
    x
                
    • 1/4" plated steel rod
    • 1/4" male right hand threads on both ends
    Note: Extra-long thread allows more adjustment
  • Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    x
                

    Engineered to support 200-3000 HP, these Aeromotive high flow fuel filters are an inexpensive insurance policy to protect your investment. Filters measure 5.5" long and 2" diameter. Contains -10 AN port fittings on the inlet and outlet. Machined from 6061-T6 aircraft aluminum and anodized for a corrosion resistant show car quality appearance. Ideal for carburetion or fuel injection up to 150psi.

    • High-flow, 10-micron fabric (fine) replaceable element 
    • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
    • Compact size: 5.5” long x 2” diameter
    • All filter assemblies feature an O-ring for positive sealing in high pressure applications
    • CNC-machined from 6061-T6 aircraft aluminum
    • Bright dip red anodized finish for a corrosion resistant, show car quality appearance

    Note: 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

  • Aluminum Flare Fitting Plug, Blue, -8 AN
    Aluminum Flare Fitting Plug, Blue, -8 AN
    x
                

    Aluminum flare plugs. 37° AN.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aluminum Tee Bulkhead Fitting, -4 AN
    Aluminum Tee Bulkhead Fitting, -4 AN
    x
                

    Aluminum tee bulkhead for 37° flare AN fittings.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    x
                

    Fits the Rochester 2GC Carburetor Part Number 455-37001.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25