Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in circle track racing carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and aFe Power. Whether you run alcohol or gas, Speedway can fuel your need for speed!

Featured Products
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
SKU-42512801
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
SKU-45537001
x
            

This Jet Performance Products 500 CFM 2GC carb is modified specifically for circle track racing. This Rochester carb complies with the IMCA rules. They are arguably the best OEM production two barrel carburetor for use in circle track racing.

  • .135 needle and seat to ensure adequate fuel and supply
  • Idle, transition, and accelerator pumps are modified
  • 1-11/16" bore, 1-3/8 venturi
  • Uses Holley jets (comes equipped with size #74)
  • 5/8-18" inverted flare fuel inlet
  • 2.008" x 3.695" mount pattern w/ .351" mount holes
  • No choke mechanism
  • Modified cluster to keep fuel curve correct throughout the RPM range
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
SKU-91076257
x
            

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

This tank features a fuel outlet that is 3" from the end opposite the filler neck.

Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
SKU-42504412
x
            This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

Features:
  • Choke delete
  • Choke horn remains
  • 50cc accelerator pump
  • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
  • The mandated carbs for many oval track racing sanctioning bodies
  • Calibrated specifically for circle track use

"Oval Track, Air and Fuel Delivery" Page 1 of 23

  • AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    SKU-10610171
    x
                AFCO Throttle Rod Components
            
  • Weiand 7530 Team G Chevy Small Block Manifold
    Weiand 7530 Team G Chevy Small Block Manifold
    SKU-8057530
    x
                

    The Weiand Team G is a 360° single-plane, open plenum manifold developed for competition S/B Chevy V8s. Features an isolated plenum and isolated water cross-over to keep the incoming air/fuel charge cooler for improved power. Effective power range is 2800-7200 RPM.

    Square carburetor mounting flange.

    Chevy Small Block Team G Manifold Installation Instructions (PDF)

     

  • JAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch
    JAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch
    SKU-458890
    x
                

    These bolt-in fuel level sending units from JAZ Products feature a positive seal and a 2.3" O.D. bung. For GM gauges with 0-90 ohm range.

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units

  • M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    SKU-910553001
    x
                These Sprint racing bell cranks come complete with a sealed bearing for  smooth action.  Multiple adjustment holes give you the ability to make it the part that works.  Anodized 6061 T6 Aluminum.
    • CNC-machined
    • Anodized black aluminum
    • Measures 2-7/16" and 3-9/16" from the center of the bearing to the end of the arms
    • Has .246" I.D. bearing
    • Bearing O.D. is .630"
    • Overall Length: 4.37"
    • Overall Thickness: .17"
    • Hole Diameter: .19"
  • Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    SKU-4733114
    x
                

    This Kinser diaphragm bypass is used for secondary or high speed bypass on long tracks. Has a restrictor jet provision, neoprene diaphragm for gasoline or methanol, and a hard-anodized aluminum housing. Simple adjustable pop-off pressure using a balde screwdriver and 7/16" wrench.

    Includes -6 AN male flare fittings.

  • Kinsler Flowed Injector Pills
    Kinsler Flowed Injector Pills
    SKU-4733715
    x
                Kinsler sizes .050-.110. Kinsler pills are offered in great variety for more precise fuel flow control in your fuel injection system.

    Pill size is listed at the end of a part number: 4733715-050 means pill size 050.

  • Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    SKU-91011585
    x
                Specially designed for IMCA Modified type motors. Only 3 1/4" diameter and works with gas or alcohol. 100 gph. Includes AN 10 inlet and AN 8 outlet. Includes pump, pulleys, mount bracket, drive mandrel and Gilmer drive belt. Mounts to Small Block Chevy block. Block pump mount.
            
  • Wehrs Machine WM110 Lightweight Adjustable Throttle Pedal
    Wehrs Machine WM110 Lightweight Adjustable Throttle Pedal
    SKU-91655020
    x
                Lightweight adjustable throttle pedal features lightweight design. Positive response. Fits  tunnel in most cars. Adjustable ratio. 
            
  • Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    SKU-3255001
    x
                

    Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.

    Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.

    NOT intended for use on heavy vehicles (trucks, vans etc.).

    Torker II Intake Manifold Installation Instructions (PDF)

  • Kinsler Fuel Injection 3328 Bypass Valve Spring, 7 Lb.
    Kinsler Fuel Injection 3328 Bypass Valve Spring, 7 Lb.
    SKU-4733328
    x
                Dial in your bypass valve with these standard bypass springs for use with alcohol carburetors. Spring has a .028" wire diameter.
            
  • Speedway Aluminum Fuel Log for Demon Carburetor
    Speedway Aluminum Fuel Log for Demon Carburetor
    SKU-91011600
    x
                

    Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.

    Features AN8 inlet and two AN8 outlets.  Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately. 

  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    SKU-910606420
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    SKU-6174090
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • AIRAID 700-410 Cone Air Cleaner Filter Assembly, 3 Flange, 9 Inch Long
    AIRAID 700-410 Cone Air Cleaner Filter Assembly, 3 Flange, 9 Inch Long
    SKU-178700410
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 3"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 9"
  • Willys Carbs WCD251 2-Barrel Throttle Stop, Return Spring Bracket
    Willys Carbs WCD251 2-Barrel Throttle Stop, Return Spring Bracket
    SKU-80015251
    x
                
    • Fits 4412 style 2 bbl. carburetors
    • Throttle stop and return spring bracket all in one
  • Sure Seal Air Cleaner Base Only, 14 Inch
    Sure Seal Air Cleaner Base Only, 14 Inch
    SKU-91011062-2
    x
                

    Speedway's Sure Seal air cleaner base is manufactured from spun aluminum. Fits Holley carbs. Uses standard 14" diameter filters, sold separately. Minimum filter height required is 4".

    • Base has a 1-1/2" drop
    • Distance from the carb neck to top with .5" spacer and 4" filter = 4.25"

     

  • AFCO 40294 Ball Bearing Throttle Pedal, 15 Degree
    AFCO 40294 Ball Bearing Throttle Pedal, 15 Degree
    SKU-10640294
    x
                

    Now AFCO control begins with the right foot. AFCO has re-engineered one of the most fundamental components of the race car to provide greater precision, improved comfort and more driver control than ever. Fully sealed bearings, double splined shaft and adjustable angle on the throttle lever means secure adjustability in a maintenance free package. 

    This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control. 

    • Double splined shaft
    • Fully sealed bearings
    • Durable anodized finish
    • Mounting instructions and tuning guide included

    106-40294 Instructions (PDF)

  • Aluminum Neck with Flange and Cap
    Aluminum Neck with Flange and Cap
    SKU-6175023
    x
                  Weld-in 2.3" O.D. bung. This aluminum filler neck bung includes a flange. Features vented cap which vents to the  underside of the cap.            
            
  • Aluminum Flare Fitting Plug, Blue, -16 AN
    Aluminum Flare Fitting Plug, Blue, -16 AN
    SKU-6176023
    x
                

    Aluminum flare plugs. 37° AN.

    Fitting Thread Application Chart (GIF)

  • Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    SKU-96052501
    x
                

    Gasoline, methanol, ethanol, and dieselfuel compatible for fuel injected applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • One -6AN inlet and one -6AN return port in-line
  • Speedway Washable Air Filter Element, 14 x 5 Inch
    Speedway Washable Air Filter Element, 14 x 5 Inch
    SKU-91011085
    x
                Why keep buying paper elements when this one could last a lifetime? These filter elements feature a multi-layer cotton gauze material which is 100% washable and reusable. Use appropriate filter cleaner and filter oil at every service.
            
  • Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    SKU-3252921
    x
                

    The Edelbrock Victor Series intake manifolds have set the standard for quality and performance in the racing industry. The Victor Jr. 302 is designed for Ford 260-289-302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads.

    The Victor Jr. 302 has no rear water crossover. Port exit size at cylinder head is 1.90" x 1.08" with enough extra material to open it up to 2.10" x 1.18".

    325-2921 Instructions (PDF)

  • AFCO 40291 Tube-Style Firewall Mount Gas Pedal
    AFCO 40291 Tube-Style Firewall Mount Gas Pedal
    SKU-10640291
    x
                Popular style steel tubular design, mounts to firewall and utilizes a positive return.  
            
  • Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    SKU-91011733
    x
                

    Compact design offers weight savings over full size filter. Comes with stainless steel high-flow element. Can be cleaned and reused. Black anodized aluminum housing. Will handle fuel injection. NOT compatible with ethanol (E85)or high pressure diesel.

    Available with AN6, AN8, AN10 or AN12 inlet/outlet.

  • AFCO 10176-24 Throttle Rod, 24 Inch Long
    AFCO 10176-24 Throttle Rod, 24 Inch Long
    SKU-1061017624
    x
                
    • 1/4" plated steel rod
    • 1/4" male right hand threads on both ends
    Note: Extra-long thread allows more adjustment
  • Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    SKU-91012301
    x
                

    Engineered to support 200-3000 HP, these Aeromotive high flow fuel filters are an inexpensive insurance policy to protect your investment. Filters measure 5.5" long and 2" diameter. Contains -10 AN port fittings on the inlet and outlet. Machined from 6061-T6 aircraft aluminum and anodized for a corrosion resistant show car quality appearance. Ideal for carburetion or fuel injection up to 150psi.

    • High-flow, 10-micron fabric (fine) replaceable element 
    • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
    • Compact size: 5.5” long x 2” diameter
    • All filter assemblies feature an O-ring for positive sealing in high pressure applications
    • CNC-machined from 6061-T6 aircraft aluminum
    • Bright dip red anodized finish for a corrosion resistant, show car quality appearance

    Note: 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

  • K&N Filters 99-0533 Air Filter Oil, Squeeze Bottle
    K&N Filters 99-0533 Air Filter Oil, Squeeze Bottle
    SKU-465990533
    x
                

    K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

    8 Oz. squeeze bottle.


  • Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    SKU-54564945
    x
                

    Phenolic material is a type of plastic resin which has excellent insulating properties, so it will keep the fuel in your 4 barrel Holley 4150/4160 cooler for more power. For 390 CFM carbs with 1.467" diameter bores.

    • Specially formulated material reduces heat conductivity 10 times greater than aluminum
    • Reduces fuel temperature inside the carburetor
    • Denser, more powerful fuel charge to the manifold
    • 4 hole plenum design
    • 1/2" height
    • Gaskets not included
  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    SKU-91011742
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Paper elements are for use with gasoline fuel only. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 10" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    SKU-6174038
    x
                

    Fits the Rochester 2GC Carburetor Part Number 455-37001.

    Fitting Thread Application Chart (GIF)

  • Carter M60565 2.3 Ford Gas Fuel Pump
    Carter M60565 2.3 Ford Gas Fuel Pump
    SKU-26060565
    x
                

    This high volume fuel pump for the 2.3L Ford 4 cylinder engine has all the desireable features you would want in a racing mechanical fuel pump. Delivers 4-1/2 to 6-1/2 psi with a 40 gph flow rating. Compatible with GASOLINE only. Has ¼ npt ports for both inlet and outlet.

    • Heavy-duty diaphragm
    • High-speed “anti-float” springs
    • Large “full-flow” valves
    • Lightweight, all-aluminum castings
    • Tough, heat-treated lever
  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    SKU-425123272
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • Speedway Premium 4 Inch Fuel Filter Element, Stainless Steel
    Speedway Premium 4 Inch Fuel Filter Element, Stainless Steel
    SKU-91011707
    x
                By simply replacing and/or cleaning your filter elements  regularly, you  can avoid costly repairs to your fuel system and ensure  peak engine  performance. These elements can be used with gas or alcohol and are easily cleanable and reusable. 
    • Soldered end caps
    • For use with gas or alcohol
    • Cleanable and reusable
    • Single open end
    • 304 stainless steel
    • 12 GPM flow rate
    • 63 micron filtration
  • AIRAID 700-493 Cone Air Cleaner Filter Assembly, 3 Flange, 6 Inch Long
    AIRAID 700-493 Cone Air Cleaner Filter Assembly, 3 Flange, 6 Inch Long
    SKU-178700493
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 3"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 6"
  • Gaerte Stainless Steel Throttle Stop
    Gaerte Stainless Steel Throttle Stop
    SKU-3911500
    x
                Earl Gaerte also came up with this slick stainless steel throttle stop and return spring bracket. Simple and functional. For most Holley or Demon carbs.
            
  • Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    SKU-91011554
    x
                Waterman's latest design Ultralight 2000 Sprint fuel pump incorporates a non-corrosive gear housing to maintain critical tolerances and control heat transfer.  Pump includes a -12 AN inlet and is ready for a three or four way manifold with -6 AN outlets.
            
  • AFCO 10175-18 Throttle Linkage Rod Kit, 18 Inch
    AFCO 10175-18 Throttle Linkage Rod Kit, 18 Inch
    SKU-1061017518
    x
                
    Adjustable throttle linkage rod kit includes 1/4" plated steel rod with right hand 1/4" male threads on both ends. Kit also includes carb bushings with 1/4" female rod ends, jam nuts and rod.
    • 1/4" plated steel rod w/ r/h 1/4" male threads on both ends
    • Includes carb bushings, 1/4" female rod ends, jam nuts, & rod
    Note: Extra-long thread allows more adjustment
  • AFCO 10174 Carburetor Bushings, Pair
    $10.99
    $11.99
    AFCO 10174 Carburetor Bushings, Pair
    SKU-10610174
    x
                AFCO Throttle Rod Components
            
  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    SKU-6007033
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Holley 34-25 Quick Change Primary Float Bowl
    Holley 34-25 Quick Change Primary Float Bowl
    SKU-4253425
    x
                Update your Holley 4150/4160 carb with quick change float bowls. Includes gaskets and plugs. For center hung float bowl. Also includes jet driver. 

    NOTE: Primary and secondary bowls are not interchangeable!

    425-3425 Instruction Sheet (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 23