Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in circle track racing carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and aFe Power. Whether you run alcohol or gas, Speedway can fuel your need for speed!

Featured Products
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
x
            

This Jet Performance Products 500 CFM 2GC carb is modified specifically for circle track racing. This Rochester carb complies with the IMCA rules. They are arguably the best OEM production two barrel carburetor for use in circle track racing.

  • .135 needle and seat to ensure adequate fuel and supply
  • Idle, transition, and accelerator pumps are modified
  • 1-11/16" bore, 1-3/8 venturi
  • Uses Holley jets (comes equipped with size #74)
  • 5/8-18" inverted flare fuel inlet
  • 2.008" x 3.695" mount pattern w/ .351" mount holes
  • No choke mechanism
  • Modified cluster to keep fuel curve correct throughout the RPM range
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
x
            

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

This tank features a fuel outlet that is 3" from the end opposite the filler neck.

Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
x
            This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

Features:
  • Choke delete
  • Choke horn remains
  • 50cc accelerator pump
  • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
  • The mandated carbs for many oval track racing sanctioning bodies
  • Calibrated specifically for circle track use

"Oval Track, Air and Fuel Delivery" Page 1 of 25

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Holley Carburetor Gas Needle and Seat, .110 Inch
    Holley Carburetor Gas Needle and Seat, .110 Inch
    x
                "Viton" needle and seat is resistant to dirt and provides superior seal when closed. Size .110" for gas carbs. Gasket not included. 
            
  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • JAZ Products 300-000-20 Fender Mount Fuel Filler Kit
    JAZ Products 300-000-20 Fender Mount Fuel Filler Kit
    x
                

    For remote filling of fuel cell. Kit contains a 12-bolt recessed fender fill assembly with vented cap (1/2 turn, twist & lock style). Fender filler flange measures 6-1/4" outside diameter.

    Cap and base are made of galvanized steel. Fill and vent hose are clear polyethylene. Use with fast fill valve.

  • Carb and Fuel Pump Fitting, 1/2 Inch-20, AN 6
    Carb and Fuel Pump Fitting, 1/2 Inch-20, AN 6
    x
                

    #6 Ford, Chrysler and early Chevy fuel pumps with 1/2"-20 inverted flare thread.

    Fitting Thread Application Chart

  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Quick Release Cable or Linkage End, 1/4-28 RH
    Quick Release Cable or Linkage End, 1/4-28 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • K&N Filters 99-0516 Air Filter Oil, Aerosol
    K&N Filters 99-0516 Air Filter Oil, Aerosol
    x
                

    K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

    NOTE: Aerosol items cannot be shipped by air.

  • Speedway Engine Vent Tube with Breathers
    Speedway Engine Vent Tube with Breathers
    x
                  Vent tube with breathers. Adaptors weld into front of aluminum or steel valve covers.

  • RCI 0111 Fuel Cell Gasket
    $7.99
    $8.99
    RCI 0111 Fuel Cell Gasket
    x
                

    Do you have a worn, damaged, or missing fuel cell filler gasket?  RCI offers an excellent solution with their fuel cell filler gasket replacements.  They're made from durable Viton® material, which is a high-tech elastomer designed for extreme heat, oil, and chemical resistance, making these fuel cell filler gaskets perfect for use with RCI fuel cells.

    RCI Fuel Cell Gasket

    • Overall Height: 9.13"
    • Overall Width: 6.25"
    • Inside Height: 7.25"
    • Inside Width: 4.50"
    • Thickness: .07"
    • For 16 bolt top
    • Rubber
  • Rons Racing Products 4020 Replacement Pulley, Belt Drive Pump
    Rons Racing Products 4020 Replacement Pulley, Belt Drive Pump
    x
                Replacement pulley for Fuel pump kit #910-11580.
    • Flange Diameter:  1.125"
    • Hole Diameter:  0.624"
    • Overall Thickness:  1.215"
    • Depth:  0.493"
    • O.D:  4.262"
    • Tooth Count:  36
  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • Purple 10 Inch Aluminum Fuel Filter, Stainless Element
    Purple 10 Inch Aluminum Fuel Filter, Stainless Element
    x
                High flow design offers excellent performance for all racing applications. Purple anodized aluminum housing with a washable and reusable 45 micron stainless steel element. For use with both alcohol and gasoline.

    Choose AN inlet/outlet sizes needed: AN6, AN8, AN10, AN12.

    NOT compatible with ethanol (E85). 

  • AN6 Fuel Shut Off Valve
    $49.99
    Product Rating: 4.50 Stars
    AN6 Fuel Shut Off Valve
    x
                

    Stainless steel ball with Teflon™ packings in machined aluminum housing, fittings and handle.  Straight through installs inline, on and off high flow valve.

     

    Fuel Tank Assembly

     

  • Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    x
                Panel mount is AN6 male with offset style handle. Fuel cell ball valve mounts in plate, has an extra long bulkhead shaft. Required for many Sprint cars. Will work on our steering mount 546-200. 
            
  • Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

    This tank features a fuel outlet that is 3" from the end opposite the filler neck.

  • Air Cleaner Nut
    $9.99
    Product Rating: 3.67 Stars
    Air Cleaner Nut
    x
                

    Easy grip air cleaner nut features a bottom O-ring seal to keep dust and debris from entering your engine. Available for 1/4" or 5/16" studs.

    • Diameter at Top:  1-1/2"
    • Diameter at Base:  7/8"
    • Height:  1-1/4"
  • Aircraft Style Fuel Filler Neck & Cap
    Aircraft Style Fuel Filler Neck & Cap
    x
                

    Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the gas filler neck. Includes cap, chain, fuel filler neck, gasket, and all hardware. Polyethylene cap is vented.

    Hole in tank needs to be 3-3/4" for cap to sit flush.

  • Small Block Chevy Intake Bolt Kits
    Small Block Chevy Intake Bolt Kits
    x
                A bolt kit for S/B Chevy intakes. All feature that unique King Chrome premium chrome plating.
            
  • AFCO 85194 Warning Light Kit, Fuel Pressure
    AFCO 85194 Warning Light Kit, Fuel Pressure
    x
                

    These units allow the driver to maintain focus on the race.

    Wiring Instructions (PDF)

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Edelbrock 2701 Performer EPS Chevy Intake Manifold
    Edelbrock 2701 Performer EPS Chevy Intake Manifold
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    IMCA racing approved.

    325-2701 Instructions (PDF)

  • Adjustable Pressure Relief Valve for Belt Drive Fuel Pump
    Adjustable Pressure Relief Valve for Belt Drive Fuel Pump
    x
                

    This pressure relief valve is the ideal bypass valve for use with a positive displacement fuel pump (typically not required for diaphragm type pumps). For use with any carbureted race engine using a belt drive fuel pump. This bypass valve is well suited for alcohol carburetors with gear type pumps.

    Adjustable diaphragm lets you set fuel pressure while the Holley jet inside allows you to reduce idle fuel pressure without affecting operating pressure. Due to fuel pump variations, the jet is not included. The fuel pump relief valve features a stainless steel seat and bronze popitt valve for maximum resistance to corrosion.

    • Easily mounts directly to the carb fuel log
    • Adjusting screw on top sets high RPM fuel pressure
    • Easy pressure adjustments at 7-14 PSI
    • Adjustable to vastly different fuel pumps
    • Maximum fuel availability at the carb
    • 3/8" NPT ports

    910-11579 Instructions (PDF)

  • Replacement O-Ring for Fuel Filter Ends
    Replacement O-Ring for Fuel Filter Ends
    x
                Replacement O-ring for Speedway 6" and 10" aluminum fuel filters. Compatible with  both methanol and gasoline. Works with stainless and paper filter elements. 

    NOTE: Springs and filter elements shown for assembly reference only. O-rings are sold EACH.

    Fuel Filter Configurations (GIF)

     

     

  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Holley Power Valve
    From: $9.99
    Product Rating: 5.00 Stars
    Holley Power Valve
    x
                Standard flow. Available sizes include: 2.5, 3.5, 4.5, 5.5, 6.5, 7.5, 8.5, 9.5 and 10.5 in hg. 

    High flow (big window valve) for alcohol. Available sizes include: 2.5, 3.5, 4.5, 5.5, 6.5, 8.5, 10.5 in hg.

  • Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adapters connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -6 AN to 3/8" aluminum pipe adapter
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    x
                A must for alky high-volume pumps. Anodized for alky fuels. 2 lb spring included. Outside safety pin. 7 lb or 12 lb bypass spring available. AN6 fittings.

    Can be used as a bypass pressure relief valve for alky or gas carburated fuel systems when installed in a return bypass line. We suggest using the 7lb spring and a 150 pill for the alky application.

  • Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
    Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Kinsler Fuel Injection 3944 Neoprene Diaphragm for Gas or Methanol
    Kinsler Fuel Injection 3944 Neoprene Diaphragm for Gas or Methanol
    x
                

    This Kinser neoprene diaphragm is for gas or methanol bypass. Will only work for Kinser High Speed Bypasses.

  • Holley 135-5 30cc Accelerator Pump Diaphragm
    Holley 135-5 30cc Accelerator Pump Diaphragm
    x
                Holley accelerator pump diaphragms are available in 30cc (427-1355) or 50cc (427-1357) sizes. For use with gasoline only.
            
  • Corner Fuel Pick-Up Assembly, 1/2 Inch
    Corner Fuel Pick-Up Assembly, 1/2 Inch
    x
                1/2" fuel line. Designed for use where maximum fuel pick-up is required. Its unique design allows the fuel line to pick-up the last drop of fuel. A must in limited gallon classes. 
            
  • Fuel Pump/Fuel Filter Housing Tube Clamp
    Fuel Pump/Fuel Filter Housing Tube Clamp
    x
                
    • Holds any 2.075" diameter pump or a 2" diameter fuel filter housing securely to frame
    • Clamps to 1.25" and 1.375" tubing sizes
    • Perfect for Carter or Walbro style pumps and 2" diameter fuel filters
    • Billet aluminum construction
  • Filler Twist Cap with Steel Neck
    Filler Twist Cap with Steel Neck
    x
                

    These filler necks come with a vented cap which vents to the underside of the cap. Steel weld-in 2.25" O.D. bung. Cap locks on the inside of the neck, not on the outside like a radiator cap.

  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.70 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Holley 12-807 Fuel Pressure Regulator Diaphragm Repair Kit
    Holley 12-807 Fuel Pressure Regulator Diaphragm Repair Kit
    x
                  

    These genuine Holley diaphragm repair kits will allow you to restore the performance of your high-mileage fuel pressure regulator. With these repair kits, you'll regain the accuracy and performance of the regulator from when it was new.

    This diaphragm repair kit is for 12-803 and 12-804 regulators.

    MFG. Part #: 12-807

  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Holley Chrome Fast Idle Cam Plate
    Holley Chrome Fast Idle Cam Plate
    x
                

    Holley offers quality choke service parts for your carburetor.  These fast idle cam plates come in a beautiful chrome finish.

    • Fast idle cam plate
    • Chrome
  • Small Block Chevy Fuel Pump Seals
    Small Block Chevy Fuel Pump Seals
    x
                

    This seal was originally developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm, but it also allows the pump to deliver cooler fuel to the carburetor. Uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature. 

    • 91011853-Hol
      • Fits old style Holley/Edelbrock pumps w/ 1/2" NPT ports on opposite end
    • 91011853-Car
      • Fits new style Holley/Carter fuel pumps
  • Wehrs Machine WM47 Carburetor Feet
    Wehrs Machine WM47 Carburetor Feet
    x
                Bolt to the base of your carburetor so you can work on it without damaging the throttle assembly.
    • 5/16”-18 threads
    • 1-1/2” tall
    • Set of 4 (nuts included)
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25