Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.
Air and Fuel Delivery
Driveline and Axles
Tire and Wheel
Electrical, Lighting and Body
Fittings and Hose
Electrical, Charging and Starting
Electronics and Telematics
Accessories and Fluids
Fasteners and Hardware
Apparel and Gifts
Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.
Weight matched sets of 8. Available in 5.7" or 6.0" lengths.
Three stacks of ten tearoffs laminated together gives same crystal clear view as one traditional tearoff. Can use multiple stacks of ten at one time. Unique design will keep dust and fog from accumulating between layers.
- Peg Hole Distance: 12-1/2"
- Height: 3"
- Length: 16-1/2"
- Fits Bell Vortex/ BR-1/ M4/ K-1/ Sport with 276, 281, 288 shield, Pyrotect
These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs. They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap.
- Holds up to 3000 lbs.
- High-strength securing latches
- Aluminum/steel corners and edges protect during transport
- FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)
- Shows all 4 wheel weights on separated displays for easiest viewing
- High quality Red cables with AN connectors
- Deluxe Silver carrying case protects electronics and stores cables
- Includes 15" x 15" low profile scale pads - 1500 lbs per pad capacity (0.1% accuracy)
- Four individual wheel weight displays
- Large four-line display for all partial percentage and weights easily customized to your preferences
- Instant recall memory for eight complete setups
- CNC machined 15" low profile scale pads with handles and recessed connectors
- Includes scale pad storage box
- New advanced low power consumption electronics run on 2.9 volt batteries (included)
- Control box includes the latest stabilization circuitry - numbers won't jump around!
- Two-year limited warranty
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
- Accuset II control box with ZigBee wireless receiver
- Includes Free deluxe scale pad box
- 4 wireless pads
- No wires to trip over, no fragile modules outside the pad
- 4 line display shows all weights and partial %
- LMF Satin finished pads with single load cells
- CNC machined 15" low profile scale pads with handles and recessed connectors
- 1/10% accuracy and 1500 lbs per pad capacity
- Two-year limited warranty
- 30" length–1 1/8" diameter
- Maintains consistency
- Optimized effective length to bearing shoulder transition
These deluxe SA10 helmets feature a soft knit fire proof lining and a lightweight fiberglass shell to help fit comfortably. They also allow you maximum visibility with large eye ports and maximum ventilation with front, top, and rear vents. Speedway SA10 helmets come predrilled for head and neck restraint systems. Choose your color and size.
- Soft knit fire proof lining
- Large eye port with optically correct 3mm shield
- Front, top, and rear vents for maximum ventilation
- Lightweight fiberglass shell
- Predrilled for head and neck restrain
- Available in White(WHT) or Flat Black(FBLK)
- Choose from sizes S-XXL
"Open Wheel" Page 1 of 25
$29.99More InfoPinstriped iPhone Cover - Gold(Part #2921005)x
Let us help you hot rod your iPhone 4. These slick covers help to protect and customize your smart phone.
- iPhone 4/4S only
- Rugged aluminum back plate
- Slimline rubber edging
$369.99More InfoIntercomp Digital Pressure Tester(Part #91381120)x
This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.
Digital Pressure Tester
- Large 1/2" back lite display.
- Gauge features 1/10th of 1% accuracy.
Setting Mid and High Speed bypasses
1. Will work to set a high speed up to 150psi.
2. Comes with a -6 AN female adapter to screw your high speed into
Setting Tire bleeders
1. Will work from 0 PSI up. With 1/10th of a pound increments.
2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.
$1,585.99More InfoFrench Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Heads(Part #2353050)x
- Racesaver Sprint Series spec Brodix cylinder heads
- Fully assembled
- Heads are certified serial numbered
- Ready and legal for use on a 305 c.i. Racesaver engine
$14.99$19.97More InfoTitan Tools 51503 Mini Tubing Bender(Part #72851503)x
- Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
- Use with Brass, Copper, Steel, or Aluminum
- Compact for limited accessibility applications
Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT(Part #6177035)x
Fuel pressure take off fittings with 1/8" NPT side port.
- Precision machined to ensure precise thread engagement
- Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
- 37° sealing angle guarantees a positive seal at maximum operating pressures
- Lets you plumb your wing slider cylinder line into the power steering
- Cleans up cockpit
- Lightweight, strong construction
- Used on sprint cars to plumb wing slider cylinder line into power steering
- Anodized aluminum
- AN 8 male on one end; AN 8 female on other
- 1/8” NPT port for plumbing wing slider cylinder line
Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$39.99More InfoMini Sprint LF Torsion Arm(Part #9609005)x
- I beam design
- 2024 material
- Two tone finish
- Includes pinch bolt
$89.99More InfoOutlaw Wings Jr. Sprint 18 x 24 Nose Wing(Part #96077111)x
This nose wing from Outlaw Wings has a 24" wide by 18" long center section with side boards that are 8" wide by 20" long.
Outlaw Front Nose Wing
- 18" x 24"
- For junior sprints
- Recessed rivets
$7.99More Info3/8 X 3/8 Clevis(Part #6680116)x
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$5.99More InfoSwindell Series Sprint Car Set-Up Sheets(Part #94082050)x
- Can be used if running a 305, 360 or 410 sprint car
- 1 tablet contains 50 sheets
- Easily organize your set-up notes for each race
- Gives you a permanent record of every adjustment and set-up
- Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
$4.99More InfoSpeedway Tire Coaster Set(Part #91019522)x
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag
$10.99More InfoWinters Performance 4043 Shurloc Sprint Shifter Cable Bracket(Part #8024043)x
This shifter cable bracket is for use with the Winters Sure-Lock shifter for a precise fit. It is simple to install and complete with bolts and spacers.
- Shifter bracket kit for Shurloc sprint shifter (part number; 910-55000)
- Includes 2 bolts, 2 spacers and 1 bracket
$239.99More InfoDeluxe 45 Degree Brake Flaring Tool(Part #91170081)x
- Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
- For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
- Turret-style design allows you to make those precision flares in minimal time
- All the brake-flaring forming dies you need are mounted right on the turret
- T-handle screw clamp securely holds your line in place during forming
- Packaged in a blow-molded case
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System(Part #9103232)x
Durable, all-steel construction will not warp, fray or crack. Attractive, scratch resistant, baked-on powder coat finish wipes clean for long-lasting beauty for any shop or work area. Installation is easy and absolutely no framework is required.
- 32" tall x 32" wide x 3/4" deep
- Pack of two
- Durable and versatile
- 20 gauge steel with a baked-on rust and scratch resistant finish
- Slotted to accept Wall Control accessories
- Holes accept conventional 1/4" peg hooks
- Choose from blue, grey, red, white, or galvanized steel
$5.99More InfoMolecule Labs MLRE4 Refresh Spray - 4oz(Part #630102)x
Keeps suits and helmets fresh over long racing weekends and between washings. Contains an anti-microbial agent to inhibit the growth of bacterial odors.
- Reduces odors on all types of technical fabrics
- Contains an antimicrobial agent to inhibit the growth of bacterial odors
- Maintains fabric breathability
- Cosmetic-grade, skin-friendly ingredients
- Light fresh scent
- Recommended for Nomex and other technical fabrics
Learn how to properly clean and maintain your racing suit by reading our tech article. Racing Suit Cleaning and Care.
$12.99More InfoRCI SA10 Racing Helmet Pivot Kit(Part #8993101)x
Replacement pivot kit for RCI SA10 helmet.
- Includes: Replacement pivot and screw
- Works on .125" think shields
- Sold in pairs
From: $329.99More InfoNewAFCO Small Body Adjustable Bulb Shock(Part #10663)x
AFCO Racing Products releases the most versatile small body shock in the industry today. Each shock is hand crafted & DYNO tested in Boonville, IN. Engineered to maximize low speed control and grip this shock features a low friction, high temperature sealing system. A second feature integrated into the design was a larger main piston, deflective disc base valve and increase gas chamber to enhance lap after lap performance, stability. Compression and rebound adjustable.
- Superior base valve design
- Maximum torsion bar arm clearance
- Low gas pressure
- Minimal rod pressure gain
- Compression Adjustable
- Rebound Adjustable
- Base valve Design
- Linear and Digressive Piston Design
- Superior base valve design
Stallard Chassis BC6401-503 Micro Sprint Right Rear Steel Torsion Arm(Part #960503)x
- 5" offset
- Less flex than aluminum arms for better bit
$55.99More InfoSpeedway Nomex Racing Gloves-Double Layer(Part #910703)x
These nomex gloves are double layer SFI-5 fire resistant rated to ensure your safety during a race. These Speedway driving gloves also feature two layer mid-forearem length with a lined leather palm and hook-and-loop wrist closure. These racing gloves are available in red, blue and black.
- Two-layer mid-forearm gloves with lined leather palm and hook-and-loop wrist closure
- SFI 5 Rated
- Available in Red, Blue or Black
- Sizes S-XXL
Learn more about SFI and TPP Ratings by reading our tech article. What are SFI and TPP Ratings?
$128.99More InfoStandard Workbench Tool Organizer Kit, Wall Control Storage System(Part #91030400)x
Over 10.5 sq. ft. of storage space and assorted shelving options, hooks and brackets. The standard workbench provides the superior, easy access storage needed for a safe and efficient workspace.
Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage.
- (3) Combo panels 32" x 16"
- (1) 9" shelf assembly with dividers
- (1) 6" shelf assembly
- (3) Plastic bins with bin hanger
- (1) Screwdriver holder assembly
- (1) Hammer bracket
- (20) Assorted hooks & brackets
- Mounting hardware & instructions
- Choose from red, white, blue, or black
$59.99More InfoTire Grinding Disc, 7 Inch Nail Head(Part #91082081)x
- 7" diameter
- Nail head design
- Very aggressive, check sanctioning body rules before use
NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.
- Never use in a loose tire
- Never use on a tire that is not inflated and fastened
- Do not use while wearing loose fitted clothing
- Use eye and face protection
$6.99$7.54More InfoWinters Performance 8440 O-Ring For Billet Champ Rear Cover(Part #8028440)x
O-ring for Winters billet Champ rear cover 4873-0.
$9.99More InfoRCI 126 Replacement Flapper Valve, 16 Bolt(Part #6007033)x
This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.
This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.
A must have safety item!
- Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
- Compatible with gas or alcohol
- Overall Length: 4-3/8"
- Overall Width: 3-3/4"
- Overall Thickness: .03"
- Clear plastic material
Note: Per vendor, this flapper valve should be replaced on a yearly basis.
Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap(Part #9601125)x
- Durable 304 stainless steel construction
- Offset fits any chassis
$4.99More InfoWinters Performance POSTER-10 10-Spline Quick Change Gear Chart(Part #8021000)x
Perfect for trailers or the race shop! 19" x 25" Laminated.
$350.99More InfoCSI 8 Inch Twin Tube Eye Adjustable Shock, Partial Build(Part #940128121)x
The RS-12 Twin Tube Eye Adjustable shock is a single adjustable shock. The eye adjustable shock features CSI's optimum flow billet piston design, low drag seals, tuned base valve assembly and our friction reducing “Gold” shaft coating.
When the time is right to go cock pit adjustable, all you need to purchase is the adapter and cock pit adjuster assembly, in minutes you will be ready to go.
All of our twin tube shocks are assembled with the finest synthetic racing shock oil and dyno tuned for optimum performance. We have spent a lot of time reducing friction to improve the overall performance of the shock and minimize fade.
Twin Tube Eye Adjustable Shock
- Includes 2013 Optimum Flow piston
- Everything needed to complete the shock minus the shims and oil
- Upgrade to linear/digressive pistons and cockpit adjustable
- Contact our Suspension Service Center to finish shocks to your exact specifications or Click Here to go to our shock rebuild page.
$184.99$211.99More InfoMoroso 68850 Sprint Car Breather Kit(Part #54568850)x
- Attaches to the valley pan on a sprint car engine
- Kit includes a 1-3/4" diameter tubing with 8.5" long legs
- Black anodize finish
- Includes a billet aluminum clamp with mounting holes
- Cleanable and re-usable filter
$49.99More InfoFinishline 400 BLACK Gear Bag(Part #345400)x
- L 25" x W 12" x H 14"
- Zippered pockets
- Easy carry handle
- Black only
$1.99More InfoSteel Dome Head Quarter Turn Fasteners(Part #91007100)xThese 1/4 turn panel fasteners feature no slip installation and removal with their all the way through 3/16" hex hole. These panel fasteners can be installed and removed using a standard 3/16" allen wrench.
- 1/4 turn
- No more slipping and gouging paint or graphics
- 3/16" hex hole allows for positive, no-slip installation and removal
- Can be used with a standard 3/16" Allen wrench
- Hex hole goes all the way through, it's impossible to get plugged with dirt, and is lighter than other fasteners
$119.99More InfoDeluxe Grooving Iron and Multi-Blade Siper Kit(Part #91082076)x
This 110 volt, 250 watt pistol grip grooving irons by Ideal Heated Knives is now available in a money saving kit with our multi-blade siping head. Works great as a heated siper when you turn the blades upside down. Great for grooving, cutting and siping. Pistol grip design can be used with or without heat.
Multi head siper and blades included.
$249.99More InfoGriffin Radiators 3-47161-X Griffin 22 X 20 Inch Sprint Car Radiator(Part #91734250)x
Griffins all-aluminum Qualifier radiator weighs approximately 6 pounds providing a estimated 33% weight reduction when compared to typical sprint car radiators. The reduced weight and exceptional cooling performance of the radiator provides an advantage during qualifying runs. Featuring one row of 1.25" tubes, the overall frame measurement (22" x 20") is a standard radiator size and fits the existing mounting framework of sprint cars saving you unnecessary time and money when replacing the OEM unit. Uses standard large cap.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.
$198.99More InfoSprint Car Floater Wheel(Part #910666)x
Makes moving the car around the shop, pits or carwash much easier. Simply attach the floater wheel hub to a new or used LR or RR wheel (if it's a used wheel it must be able to hold air).
The assembly within the floater hub supports the weight of the car and allows the wheel to freely rotate. This enables one crew member to easily move the car around the shop or pit area.
Note: Wheel is not to be used for starting or racing applications.
$19.99More InfoHANS Device Quick Click Sliding Tether, Sport II(Part #45111413)x
- Replacement sliding tether for Quick Click type of helmet anchors
- Includes 2 tether carriers and 4 screws
- 3 lengths: Short 17", Standard 18", Long 19"
- Standard 18" length works in most applications
- All tether lengths offer the same level of protection
$130.99More InfoMicro Sprint Regina 530 Chain(Part #960660)x
- Features solid rollers and extended bushings
- High carbon alloy pins and increased roller thickness to prolong life
- Gold outer plates and copper rollers
- Tensile strength is 9400 lbs.
- Master link not included (see 960-661)
$79.99More InfoEagle Motorsports #2 Sprint Car LH Safety Armguard(Part #9403825)xEagle Motorsports factory-built component.
- Fits 2012 and previous raked cage cars
- 2" raised cage in rear only
- Fiberglass construction, gel coat finish
$149.99More InfoSpeedway C&R Heater Hose Kit(Part #9404025)x
This kit is used for plumbing a C&R engine heater to the race car. Comes with 10 feet of Black Aeroquip hose with brass push-on ends. Features 2 female steel quick releases for the hoses and 2 aluminum mail quick releases for the car.
- Plumbing a C&R engine heater to race car
- 10 feet of Black Aeroquip hose
- Brass push-on end fittings
- (2) female steel quick releases for the hoses
- (2) aluminum mail quick releases for the car
$799.99More InfoSwindell Series by Ti64 Complete Spike Chassis Ti Bolt Kit(Part #910219)x
Please view the product's page for more information
$3.99More InfoMicro Sprint R6 Sprocket Nut Washer(Part #96020023)x
- Helps secure sprocket nut to sprocket
- For Yamaha R6
$89.99More InfoStallard Chassis BC6401-504 Micro Sprint Left Rear Steel Torsion Arm(Part #960504)x
- 1-1/8" x .120 4130 steel
- Less flex than aluminum arms for better bite
$795.99More InfoHANS DK12034-421 Adjustable Hans Device, Quick Click, SA, Medium(Part #451123442)x
The HANS Adjustable™ provides award-winning HANS performance in any type of car.
- Adjustable angle from 10 to 40 degrees fits all types of cars and seats
- Easy to adjust in 5 degree increments – providing more comfort
- Sliding tether
- Quick click
- SA hardware (Nutwashers included with SA hardware)
- Weight: 970 grams
- Size: Medium
Altering The Angles (PDF)