Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Open Wheel

Shop Open Wheel At Speedway Motors

Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.

Featured Products
  • Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    New
    Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    (Part #757R663H)
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. These sets are  specifically for 1969-Up 302-305-327-350 S/B Chevy "Large Journal" engine (with 2.100" rod  journals).
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.
    • X001 has .001" extra bearing clearance

    H-Series Features (Link)
  • Moroso 64885 Vacuum Pump V-Belt 5 Inch Pulley
    New
    Moroso 64885 Vacuum Pump V-Belt 5 Inch Pulley
    (Part #54564885)
    x
                

    Moroso 64885 Vacuum Pump V-Belt Pulley is 5 inches in diameter and uses a stock 3 bolt mounting pattern with a 1.16 inch bolt circle. Constructed from high grade aircraft aluminum, these pulleys feature an anodized finish to help extend service life. The deep V-groove will ensure belt retention no matter the racing conditions.

    • 5 inch diameter
    • 1.16 Inch bolt circle
    • 3 bolt mounting pattern
    • Machined with 6 holes for weight reduction  
    • Constructed from high grade aircraft aluminum
    • Anodized finish
  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • EAGLE LEFT SAIL PANEL
    $36.99
    New
    EAGLE LEFT SAIL PANEL
    (Part #9405607)
    x
                Eagle Motorsports factory-built component. These LH side sail panels for sprint cars feature rolled edges that wrap neatly around your chassis uprights. Fiberglass  construction is smooth and durable. Available in white or black.
    • Fits 2013 style Eagle Motorsports chassis
    • Works with safety kits
    • Hugs tube edge
    • Fiberglass construction, gel coat finish
  • Retro Speedway Logo Decal Sheet
    Retro Speedway Logo Decal Sheet
    (Part #910851)
    x
                One 3" x 4" and two 1.5" x 2" per sheet. Perfect for your tool box or car! 
            
  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.67 Stars
    3/16 Inch Steel Brake Line
    (Part #91031800)
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    (Part #617406)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 4.67 Stars
    Winters Quick Change Gears, 10 Spline
    (Part #80285)
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

Filter

"Open Wheel" Page 1 of 50

Page 1 of 50

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Henchcraft Mini Lightning Sprint Floor Pan Bolt Kit
    Henchcraft Mini Lightning Sprint Floor Pan Bolt Kit
    (Part #9708332)
    x
                

    Attach the floor pan to your Henchcraft Mini Lightning Sprint chassis with this clean bolt kit. They come complete for a quick and easy installation.

    • Mounts floor pan to Henchcraft chassis

    Includes:

    • (11) 10-32 x 1/2" bolts
    • (11) Nylock nuts
  • Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    (Part #83523010483)
    x
                
    These steel bolt kits from Wilwood Brakes work with dynamic rotor mount kits and feature a zinc coated finish. They include all hardware needed.
    • Dynamic S mount rotor bolt kit
    • Includes:
      • (8) 5/16" 12-point bolts
      • (8) T-Nuts
      • (8) Washers

     

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    (Part #91050302)
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    New
    Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    (Part #109617)
    x
                

    This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

    • 10" Converter
    • For GM TH350 transmission
    • 3500+ RPM stall
    • Sold Individually 

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

     

  • Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    (Part #97010073)
    x
                

    This oil drain tube from Henchcraft Chassis is for your Kawasaki Zx10 engine. The aluminum tube is cut to proper length for an easy install.

    • Install when using billet oil pan (97010064)
    • Aluminum Material
    • Natural Finish
    • Henchcraft Lightning Sprint Chassis
    • Sold Individually


  • XS Power 525 925 Billet Aluminum Battery Hold Down Kit
    XS Power 525 925 Billet Aluminum Battery Hold Down Kit
    (Part #913525)
    x
                
    These aluminum battery hold downs from XS Power can be used as a universal mount for a variety of applications. They come with all necessary hardware for a quick and easy installation.
    • Lightweight aluminum construction
    • Universal mount design
  • Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
    New
    Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
    (Part #210973)
    x
                Please view the product's page for more information
            
  • Stallard Sprint Ignition Dash Panel
    $29.99
    $34.99
    Stallard Sprint Ignition Dash Panel
    (Part #9652119)
    x
                

    This is an upper aluminum tray for mounting all engine ignition components and wiring. It has four quarter-turn fasteners that hold the tray above driver compartment in your Sprint racing chassis.

    • Aluminum Material
    • Natural Finish
    • Sold Individually
    • .80 lbs.
    • .05" material thickness

     

  • Moroso 22640 3-Vane Vacuum Pump, Original Design
    New
    Moroso 22640 3-Vane Vacuum Pump, Original Design
    (Part #54522640)
    x
                This 3-vane vacuum pump has a versatile billet aluminum design. Its engineered vane material allows for improved efficiency and wear.
    • Versatile Billet aluminum design
    • Achieves greater vacuum sooner
    • Engineered vane material for improved efficiency and wear
    • 4.150" O.D. body, 5.050" from back of pump to pulley mounting flange
    • Completely rebuildable in 15 minutes
    • Mounting bracket not included
    • 6500 max pump rpm

    Assembly Instructions (PDF)

     

  • Fragola 2245091-BL 45 Degree Hose Fitting Adapter, -8 AN to 10 AN
    New
    Fragola 2245091-BL 45 Degree Hose Fitting Adapter, -8 AN to 10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    New
    Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    (Part #2751034)
    x
                

    Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

    • 240-33 OHM
    • 11 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
  • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    New
    Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    (Part #91050305)
    x
                

    Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

    • Features circuit breakers in place of standard fuses
    • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
    • Made in the USA

    Assembly Instructions (PDF)

  • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    New
    Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    (Part #91070956)
    x
                

    This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 20' long
  • Henchcraft Mini Lightning Sprint Chain Tensioner Link
    Henchcraft Mini Lightning Sprint Chain Tensioner Link
    (Part #9708308)
    x
                

    This aluminum chain tensioner link from Henchcraft Chassis is designed to connect the guide block to the roller on a Henchcraft tensioner assembly.

    • Aluminum construction
    • Connects guide block to roller
    • Lightning Sprint applications
  • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    New
    Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    (Part #6172318071)
    x
                

    This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • Aluminum Construction
    • Black anodized finish
    • 180 Degree
    • Adapts -6 AN hose to -8 AN fitting
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet 
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends                                                                                           &nbs
  • Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    New
    Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    (Part #617231813)
    x
                

    This 180 degree Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature a red/blue anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • 180 Degree
    • Red/Blue anodized finish
    • Aluminum Construction
    • Adapts -16 AN hose to -12 AN fitting 
    • Works with steel braided hose

     

  • Henchcraft 2009-Up Suzuki GSXR Engine Mount Kit
    Henchcraft 2009-Up Suzuki GSXR Engine Mount Kit
    (Part #97010050)
    x
                

    New from Henchcraft Chassis, these engine mount kits allow you to mount your GSXR engine to the motorplate on your Mini Lightning Sprint 1000cc chassis.  They include all mounts needed for a successful installation.

    • (4) billet motor mounts
    • For use on 2009-up GSXR engines
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    New
    Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    (Part #6172312151)
    x
                

    Fragola's 120 degree adapter hose ends offer a black anodized finish and eliminate the permeation issues common with aftermarket racing hose. This adapter adapts -12 AN hose to -16 AN female fitting.

    • 120° hose end fitting
    • Aluminum construction
    • Black anodized finish
    • Adapts -12 AN hose to -16 AN female fitting
  • Fragola 224509 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 224509 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #617224509)
    x
                Fragola's 45 degree adapter hose ends offer a bright dip  anodized blue/red  finish and eliminate the permeation issues common with  aftermarket  racing hose.  A unique "double-swivel" design allows for  clocking  adjustment during installation.
    • 45° hose end fitting
    • Adapts -8 AN hose to -10 AN fitting
    • Blue/Red anodized finish
    • Double-swivel design
    • Works with braided hose
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50