Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Wings & Accessories At Speedway Motors

Speedway Motors is the Sprint car racer's source for wings and accessories. We stock rugged aluminum wings for Sprints, Mini Sprints and Micro Sprints, plus all the essential mounts, edge protectors and accessories, all at great prices!

"Open Wheel, Wings" Page 1 of 3

  • Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    x
                

    This nose wing from Outlaw Wings has a 24" wide by 18" long center section with side boards that are 8" wide by 20" long.  

    Outlaw Front Nose Wing

    • 18" x 24"
    • For junior sprints
    • Recessed rivets
    • Aluminum
  • Carbon Fiber Leading Edge Protector, Top and Nose
    Carbon Fiber Leading Edge Protector, Top and Nose
    x
                

    Protect the front of your top and nose wings with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

    • Used on sprint cars where you need to keep the leading edge of your wing clean 
    • Made of strong carbon fiber
    • Attach easily with a few rivets or even silicone
    • 60" x 6" top wing
    • 36" x 3-1/2" nose wing
  • Garage Sale - Tru-Square Mini/Micro Sprint Rearend Alignment Tool, 2 Inch, 1-3/4 Inch Axle
    Garage Sale
    Garage Sale - Tru-Square Mini/Micro Sprint Rearend Alignment Tool, 2 Inch, 1-3/4 Inch Axle
    x
                

    The Tru-Square tool clamps to the axle directly above the setup blocks, therefore the tool that is needed is determined by the overall diameter of the axle or axle spacer (if applicable) at this location.  Measure the diameter of your rear axle or the diameter of the spacer (if there is a spacer on the axle) directly above the set up blocks.

    Tru-Square Mini/Micro Sprint Rearend Alignment Tool

    • 2" (on both sides)
    • For 1-3/4 Inch Axle
    • Spacers and clamps

     

    This is garage sale priced because it is scratched.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    x
                

    Top off your Micro or Mini Sprint car with a top-quality, money-saving Micro / Mini Sprint Top Wing Kit from Speedway Motors.

    Speedway’s new Micro / Mini Sprint Top Wing Kit is built from premium-quality aircraft aluminum to provide the strength and light weight demanded by top racers. The wing kit is easily assembled using countersunk rivets and features 54-inch offset sideboards and internal sliders. A quick-change wicker bill ensures easy adjustability between events; different wicker bill sizes are available separately. The Micro / Mini Sprint Top Wing Kit is economically priced under $400 and ships via standard UPS ground freight, saving you both time and money.

    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit

    • Premium aircraft aluminum
    • 54" offset sideboards
    • Countersunk rivets
    • Internal sliders
    • Quick change wicker bill
  • Stainless Nose Wing Strap
    $11.99
    Stainless Nose Wing Strap
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
    • Three height adjustments – 8.25", 8.75", 9.25"
  • Sweet Mfg. 306-10200 Wing Cylinder, 10 Inch
    Sweet Mfg. 306-10200 Wing Cylinder, 10 Inch
    x
                The first 10" stroke wing cylinder specifically designed for oil use! Mate with Sweet valve for optimum performance. Rated to 1300 psi!
            
  • Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
  • Billet Nose Wing Post Tube Clamp, 1.125 Inch Tube
    Billet Nose Wing Post Tube Clamp, 1.125 Inch Tube
    x
                Machined to be aerodynamic - these tube clamps fit on your front torsion tubes for quick and easy adjustments or replacement.  Accept a 3/4" post, includes hardware. 
            
  • Adjustable Tubular Chromoly Nose Wing Straps, J&J, 8-3/4 - 10-1/4 Inch
    Adjustable Tubular Chromoly Nose Wing Straps, J&J, 8-3/4 - 10-1/4 Inch
    x
                These chromoly straps have formed mounting tabs for greater stability and offer adjustments at 9", 9-3/4", and 10-1/2". Powder coated black.
            
  • King Racing Products 2330 Wing Ram Adapter
    King Racing Products 2330 Wing Ram Adapter
    x
                Don't fight misalignment or bind.  Install this adapter to add 1 5/8" more length and additional movement to your wing ram.  Threads on any wing ram and accepts a 3/8" heim. 
            
  • Garage Sale - HRP SHK0802-S Shark Nose Wing
    Garage Sale
    Garage Sale - HRP SHK0802-S Shark Nose Wing
    x
                
    • Race proven aerodynamic shape
    • Rigid sideboard design
    • Replaceable components
    • Front aero caps
    • Full kickets
    • .060" 2024 aluminum 1" tall wicker bill
    • .020" thick 6061 aluminum skin
    • Incorporates replaceable components
    This nose wing is garage sale priced because the corner was damaged in shipping and it does not include any hardware.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Micro Sprint 24 Inch Nose Wing
    Micro Sprint 24 Inch Nose Wing
    x
                

    Cap off the front of your Mini Sprint or Micro Sprint car with this beautifully polished, lightweight aluminum nose wing. This 24" wide wing has 18-7/8" long sideboards which are 8-1/2" front to back. Mounting tabs must be fabricated.

    • Polished aluminum
    • Heavy duty construction
    • No mounting tabs

    NOTE: The side boards are not attached. The rivets and side boards are included and must be assembled. This is done to minimize shipping damage.

  • HRP VFT6550-200 Sprint Dish Wing Standard Side Boards, 2-1/2 Inch Dip
    HRP VFT6550-200 Sprint Dish Wing Standard Side Boards, 2-1/2 Inch Dip
    x
                

    These replacement side boards are designed for dipped HRP top wings.  Choose your side.

    • WoO, ASCS, Knoxsville & IRA approved
    • Recessed rivets
    • All holes are pre-drilled for easy assembly
    • Choose right, left, or right hand super board

    Note:  Right Hand Super Boards are for use with flat top style wings.

  • Wing Valve Tab, Standard
    $2.99
    Wing Valve Tab, Standard
    x
                Works with all wing slider valves, formed for strength, standard mount.
            
  • Carbon Fiber Leading Edge Protector, Nose Only
    Carbon Fiber Leading Edge Protector, Nose Only
    x
                

    Protect the front of your nose wings with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

    • Used on sprint cars where you need to keep the leading edge of your wing clean 
    • Made of strong carbon fiber
    • Attach easily with a few rivets or even silicone
    • 36" x 3-1/2" nose wing
  • Garage Sale - Sprint Car Wing Cylinder Adapters
    Garage Sale
    Garage Sale - Sprint Car Wing Cylinder Adapters
    x
                

    These cylinder adapters are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Eagle Motorsports Top Wing Spud
    Eagle Motorsports Top Wing Spud
    x
                

    Eagle Motorsports factory-built component. 

    • Fabricated, chromoly tubing
    • Direct replacement for Eagle Motorsports chassis top wing spud 

    Eagle Motorsports Chassis Repair Guide

  •  Garage Sale - Wing Tree Leg
    $9.99
    $12.99
    Garage Sale
    Garage Sale - Wing Tree Leg
    x
                Please view the product's page for more information
            
  • Sprint Car Wing Slider Hose Kit
    Sprint Car Wing Slider Hose Kit
    x
                

    Kit comes with 15 ft. of 1/4" nylon high pressure hose, (2) 90° push-lock steel fitting hose ends and (5) straight push-lock steel fitting hose ends.

    • Inside Diameter: .180"
    • Outside Diameter: 1/4"
    • Material of Construction: Nylon
    • Wall Thickness: .035"
    • Temp Range: -60° to 200° F
    • Max Pressure: 250 PSI
    • Burst Pressure: 750 PSI
    • Color: Natural
  • HRP HRP8018W Steel Nose Wing Tube Clamp
    HRP HRP8018W Steel Nose Wing Tube Clamp
    x
                Welded with the correct offset eliminates bind and headache. 4130 construction prevents breakage. Accepts 1" post.
            
  • Sweet Mfg. 306-10100 Wing Valve
    Sweet Mfg. 306-10100 Wing Valve
    x
                Offers an unbelievable 3 inch per second movement and able to move your wing forward at speed. Plumbed straight from pump with -6 lines and -3 to the cylinder. Lightweight cast construction with unique mounting feature for easy access.
            
  • Manual Wing Slider
    $49.99
    Manual Wing Slider
    x
                This Manual Wing Slider has a maximum extension range of 18" to 29".
            
  • Vortex Angle Board Nose Wing, Outside Mount
    Vortex Angle Board Nose Wing, Outside Mount
    x
                

    Now you can have EXACTLY the same wing chosen by champions. Outfitted with the same options and features these wings are furnished with the major components factory assembled. Simply rivet on the side boards with the hardware supplied and you are ready to go in minutes!

    • Computer Engineered
    • CNC Fabricated
    • Wind Tunnel Tested
  • Carbon Fiber Leading Edge Protector, Top Only
    Carbon Fiber Leading Edge Protector, Top Only
    x
                

    Protect the front of your top wing with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

    • Used on sprint cars where you need to keep the leading edge of your wing clean 
    • Made of strong carbon fiber
    • Attach easily with a few rivets or even silicone
    • Measures 60" x 6"
  • Vortex Dish Top Wing Side Board Bracket Kits
    Vortex Dish Top Wing Side Board Bracket Kits
    x
                

    Side board bracket kits for Vortex Dish Top Wing.

  • Garage Sale - Vortex Flat Top Wing Replacement Side Board, Right Side
    Garage Sale
    Garage Sale - Vortex Flat Top Wing Replacement Side Board, Right Side
    x
                

    Replacment side boards for Vortex Flat Top Wing.

     

    This side board is garage sale priced because it was bent in shipping.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

  • Goodridge K390415BK -4 AN Kevlar Wing Line, 15 Inch
    Goodridge K390415BK -4 AN Kevlar Wing Line, 15 Inch
    x
                

    These lightweight Kevlar lines are stronger than braided lines. They will take more abuse with less expansion. Plus, these lines are smooth and will not rub off your paint like braided lines can.

  • HRP 8811-A75 Shark Top Wing Post, Sprint/Midget Racing
    HRP 8811-A75 Shark Top Wing Post, Sprint/Midget Racing
    x
                Ever have trouble moving your wing. Well look no farther. These   HRP Steel T-posts come with a radiused wing ride surface for easy sliding.  These easy glide wing posts have a 75 degree angle and work perfectly with Shark top wing.
    • Easy glide wing post
    • 75 degree angle
    • 11-1/4" long
    • 4130 construction
    • Bare finish
    • Sold each
    • Works perfectly with Shark top wing
  • Wing Clips
    $4.99
    Wing Clips
    x
                

    Allows quick wing tree adjustments with no wrenches. 

     

    • Durable
    • Lightweight
    • Fast & Easy Adjustments 

     

  • KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    x
                
    • Engineered hydraulic sprint wing cylinder
    • Internal quad seal technology – 1300 psi
    • Heim bearing mounting and standard porting
    • Standard 10” cylinder length
  • Vortex Angle Board Nose Wing, Inside Mount
    Vortex Angle Board Nose Wing, Inside Mount
    x
                

    Now you can have EXACTLY the same wing chosen by champions. Outfitted with the same options and features these wings are furnished with the major components factory assembled. Simply rivet on the side boards with the hardware supplied and you are ready to go in minutes!

    • Computer Engineered
    • CNC Fabricated
    • Wind Tunnel Tested
  • HRP VFT0512-K 5x5 Dish Top Wing Kit w/ Countersunk Rivets
    HRP VFT0512-K 5x5 Dish Top Wing Kit w/ Countersunk Rivets
    x
                

    Hepfner Racing Products is a leader in the design and manufacturing of sprint car wings. CNC punched and formed, each wing is identical and all internal components are formed and lightened. Top wing kit features countersunk rivets for increased airflow and added strength. Complete top wing kit includes internal runner, chromoly front post, rivets and complete instructions. All holes are drilled. Assembly takes anywhere from 1-2 hours.

    • Top wing for winged sprint cars
    • Flush rivets for better airflow
    • Pre-drilled holes for easy assembly
    • Approved for use with WoO, IRA, Knoxville, All Stars, ASCS and others
    • Complete package includes internal runners, chromoly front posts, rivets and braces

    HRP Top Wing Installation Instructions (PDF)

  • HRP VFT1094 Nose Wing Wicker Bill - 36 Inches Wide
    HRP VFT1094 Nose Wing Wicker Bill - 36 Inches Wide
    x
                

    Use where rules allow 1" tall wicker bills. quarter turn fastener on style. Nose wing 1-1/4" tall when mounted under wing it leaves 1" above wing. Made from .040" aluminum. 

  • HRP HRP8811-A75 Easy Glide Top Wing Post, Angled
    HRP HRP8811-A75 Easy Glide Top Wing Post, Angled
    x
                

    Ever have trouble moving your wing. Well look no farther. Theres HRPSteel T-post come with a radiused wing ride surface for easy sliding.

    •   11 1/4" tall.
  • Mini Sprint 30 Inch Nose Wing
    Mini Sprint 30 Inch Nose Wing
    x
                

    This heavy duty  mini sprint nose wing is well constructed. It’s the perfect crowning piece for the front of your race car. Measures 30" wide with 18" x 9" side board.

    • Fits Mini Sprint cars 
    • Mounting tabs NOT included
  • Henchcraft Chassis Mini Lightning Sprint Top Wing Post
    New
    Henchcraft Chassis Mini Lightning Sprint Top Wing Post
    x
                

    New from Henchcraft Chassis, these top wing posts feature a steel "T" design that fits any internal slider wing. Round tube top offers low drag movement. Tab makes for hassle free slider mounting and bind free operation.

    • Steel "T" design
    • Low drag configuration
    • For use on Henchraft Mini Lightning Sprint chassis
    • Sold as a set
Goto Previous PagePrevious Page
1 2 3