Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.

Featured Products
3rd Generation Hydraulic Round Tubing Bender & 5 Die Set
3rd Generation Hydraulic Round Tubing Bender & 5 Die Set
x
            

Using advanced computer design methods and mass production, Speedway Motors brings you a superior tube bender at a better price. This eight ton hydraulic jack bends up to .134 mild or .096 Chromoly round tubing. Tubing bender weighs less than 50 lbs and comes with a complete set of 5 aluminum dies.

Make a roll bar or roll cage like a pro, makes pipe bending easy -- you won't find a better bender anywhere! This rugged design will bend 1", 1-1/4", 1-1/2", 1-5/8" and 1-3/4" round tubing on a 7" radius.

  • Maximum bend is 90 degrees
  • Incremental marks cast into dies makes it easy to reproduce bends
  • Machined steel followers

910-84116 Instructions (PDF)

Proform 67650 Economy Scale System
Proform 67650 Economy Scale System
x
            

Perfect for Mini Sprints. 

  • Oversized easy to read digital display.
  • Display box mounted in carrying case.
  • 20' cables are labeled for correct hook up.
  • 1/10% accuracy.
  • 14-1/2"x9-1/2"x2-1/2" pads.
  • 1250 lb. per pad, 5000 lb. total capacity.
  • Includes scale pad case.
  • Powered by four AA batteries. 
A newly designed LCD display interface, that includes these additional features:

  • Cross Weight
  • Side/Side Weight
  • Front/Rear Weight
  • Battery Charge Indicator
Proform Economy Scale System Instructions (PDF)
37 Degree Flaring Tool for Stainless Steel Line
37 Degree Flaring Tool for Stainless Steel Line
x
            

This is the best flaring tool for the money we have found. It has a ratcheting feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

  • Provides smooth, uniform flares with minimum effort
  • Ratcheting feed screw handle requires less motion and effort than standard handle
  • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

Instructions (PDF)

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Intercomp SW787 Wireless Scale System
$1,439.99
$1,449.99
Product Rating: 5.00 Stars
Intercomp SW787 Wireless Scale System
x
            

Displays Setups to One Hundredth of a Percent! Intercomp’s PC Wireless Scale Systems combine our ultra accurate Billet Scale Pads with Intercomp’s tested & proven advanced RFX™ Wireless Weighing Technology.

Software compatible with: Windows® 2000, Windows® XP, Vista™ & Windows® 7.

  • Laptop not included, shown for reference only
  • 15" X 15" X 2.5" Wireless billet pads
  • RaceWeigh software for PC
  • AA alkaline batteries for scale pads
  • 1,500 Pad capacity, 6,000 lb system capacity
  • 2 year warranty
  • Includes FREE scale pad box (a $249.99 value)  
  • Fully Integrated RFX™ Wireless Technology      
  • RS232 Output to Printer
  • Store & Recall Chassis Setups  
  • 400hr Average Battery Life in Pads

NOTE: Laptop NOT included.

"Open Wheel, Tools" Page 1 of 23

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • Heads for Grooving Iron
    $12.99
    Heads for Grooving Iron
    x
                

    Grooving Iron heads for grooving irons listed below.

    • 445-250 - Tru-Hot Grooving Iron
    • 445-251 - Ideal Grooving Iron
    • 910-82065 - Econ-o-siper

    Grooving Iron Replacement Heads and Blades Application Chart

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 5.00 Stars
    Titan Tools 51503 Mini Tubing Bender
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Tire Stagger Tape, 10 Feet
    $5.99
    Tire Stagger Tape, 10 Feet
    x
                Stagger tape features thumb locking feature. 10' long, 1/4" wide steel tape. Use to measure tire circumference. 
            
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 3.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    x
                These dry erase boards are great for making notes at the track or  in the garage.  Their convenient 17-1/2" x 19-1/2" size make them easy  to transport. 
    • Stamped aluminum
    • 17-1/2" tall x 19-1/2" wide
  • Performance Tool W54220 Grease Suction Gun
    Performance Tool W54220 Grease Suction Gun
    x
                Great for filling or emptying rear ends and trannys.  You shouldn't be without one!
            
  • Longacre 50883 Tire Marking Pen
    Longacre 50883 Tire Marking Pen
    x
                

    Writes directly on the tire's surface to easily remember tire sizes or other measurements.

    • Makes a finer line, easy to read
    • Mark tire sizes, pressures, etc.
    • Silver marking won't come off from heat
  • Triangular Red Funnel with Fliter
    Triangular Red Funnel with Fliter
    x
                

    Triangular shape funnel allows fast flow. Features large 13" opening and anti-slosh lip. Red only.  With filter.

  • Performance Tool W41032 Engine Lift Chain
    Performance Tool W41032 Engine Lift Chain
    x
                24 inches of heavy duty 1000 lb load chain. 
            
  • Performance Tool W80524 Valve Lash Feeler Gauges
    Performance Tool W80524 Valve Lash Feeler Gauges
    x
                This precision feeler gauge from Performance Tool features 3" long blades with a .002" step for setting valve lash. The feeler gauge has 22 blades and measures from .004" to .025".
            
  • DECO Angle Finder Tool
    $9.99
    Product Rating: 4.75 Stars
    DECO Angle Finder Tool
    x
                Used for setting pinion angle, and critical chassis components such as panhard bar, etc. Magnetic base.
            
  • Teflon Hose Tool
    $39.99
    Product Rating: 5.00 Stars
    Teflon Hose Tool
    x
                This hand-held tool is designed to seat Teflon tube against a sleeve. Use with smooth-bore Teflon hose in sizes AN3, AN4, AN5, AN6, AN8, AN10 and AN12. 
            
  • Cleco Pliers, Fasteners, and Clamps Holding Tray
    Cleco Pliers, Fasteners, and Clamps Holding Tray
    x
                Now you can organize and store your cleco when not in use.  This sturdy aluminum carrier will allow you to sort and hold (10) 3/16", (10) 5/32", and (10) 1/8" cleco's.  It also has space to store 10 clamps and your Cleco pliers.
            
  • Standard Pinstriping Brush
    $9.99
    Standard Pinstriping Brush
    x
                
    • Size 0
    • Real blue squirrel hair
    • Round wood dowel hendle
    • Bound ferrel
    • 2 1/2" handle, 2 1/4" brush length
  • Green Plastigauge for Bearing Clearance, .001-.003 Inch
    Green Plastigauge for Bearing Clearance, .001-.003 Inch
    x
                Place a piece of this thread on a rod or main journal, torque cap in place, remove cap and by using the included chart, you know what your bearing clearance is. You should have one of each when assembling your engine. 
            
  • Wire Stripper and Crimper
    $4.99
    Product Rating: 4.33 Stars
    Wire Stripper and Crimper
    x
                

    Allows you to cut, strip and crimp 22 - 10 gauge wire and terminals and 7 - 8.5mm spark plug wires and terminals.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Small Block Chevy Deluxe Oil Pump Primer
    Small Block Chevy Deluxe Oil Pump Primer
    x
                

    Strong and Durable S/B Chevy oil pump primer. Features a special bushing to allow the lifters to be lubed.

  • Hydraulic Release Bearing Set-Up Tool
    Hydraulic Release Bearing Set-Up Tool
    x
                Another Speedway exclusive -- makes hydraulic release bearing set-up as easy as 1-2-3. We all know what a pain it is to set the clearance on a hydraulic release bearing. With this handy little tool you will take the guess work and drudgery out of it. 

    Simply hold the tool up to the bellhousing and push the rod in until it touches the pressure plate fingers. Then turn the tool around and place it up to the transmission, and you can check your clearance.

    Made of heavy steel construction with a black oxide finish, so this tool won't wear out or break. Numbers are laser etched.

    Hydraulic Release Bearing Set-Up Tool Instructions (PDF) 

    Learn how to properly use this tool by reading our tech article How to Install a Hydraulic Throwout Bearing.

     

  • Checkered Flag Bar Stool
    $39.99
    Checkered Flag Bar Stool
    x
                

    Our checkered flag bar stools are just the ticket to finish off your shop, bar, game room or den. Features a thick foam pad, non-swivel seat, single foot ring, and non-skid feet. Assembly required.

    • 30-1/2" tall
    • 14" wide

    726-82400 Instructions (PDF)

  • Longacre 50635 Rebco Electronic Pyrometer
    Longacre 50635 Rebco Electronic Pyrometer
    x
                Tire temps are critical when dialing in your car at the track. This Rebco tire pyrometer is fast, accurate, and fits in your hand like a glove. Use this electronic pyrometer to measure the heat of your tires so you can adjust your suspension accordingly. Kit includes 0-1400° pyrometer, detachable tire probe, and handy carrying case. Also useful for checking heat in exhaust headers to help diagnose fuel delivery problems, mis-firing, etc.
    • Ultra Quick update display & fast response tire probe
    • Can record highest temp reached
    • Temp range up to 1400º
    • Push button to 'Hold' any temp
    • Low battery indicator and auto shutoff
    • Compares one temp to another with the push of a button
    • Carrying case included

    604-11035 Instructions (PDF)

  • Performance Tool W750 7-Piece Chisel Set
    Performance Tool W750 7-Piece Chisel Set
    x
                

    Get the job done with this 7-piece chisel set from Performance Tool.

    • Hardened and tempered high carbon steel construction
    • Vinyl covered shank absorbs shock and reduces vibration
    • Handy storage pouch
    • Pin punch sizes: 3/16" x 6"
    • Taper punch sizes: 1/8" and 3/16" x 6"
    • Center Punch sizes: 3/8"
    • Cold Chisel sizes: 3/8", 1/2" and 5/8"
  • Titan Tool 19023 HVLP Gravity Feed Spray Gun, 2.3MM
    Titan Tool 19023 HVLP Gravity Feed Spray Gun, 2.3MM
    x
                These HVLP gravity feed spray guns will satisfy your priming and painting needs. They feature a 2.3mm needle and brass nozzle with a 600cc plastic cup, and they come with their own locking air regulator and gauge.
    • Brass fluid and air nozzle
    • 600cc plastic cup
    • Includes locking air regulator with gauge
    • Air consumption 7.0-9.0 CFM
    • Air inlet 1/4"
    • 2.3mm needle and nozzle
  • Wehrs Machine WM22 Gundrilled And Solid Axle Puller
    Wehrs Machine WM22 Gundrilled And Solid Axle Puller
    x
                
    • Will work for solid or gundrilled axles
    • 3/8"-24 stud with 3/4"-16 adapter
  • 37 Degree Flaring Tool for Stainless Steel Line
    37 Degree Flaring Tool for Stainless Steel Line
    x
                

    This is the best flaring tool for the money we have found. It has a ratcheting feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

    • Provides smooth, uniform flares with minimum effort
    • Ratcheting feed screw handle requires less motion and effort than standard handle
    • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

    Instructions (PDF)

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Kwik Change Products 713-300 Hand Pump for Setting Bleed-Offs, 0-30 PSI
    Kwik Change Products 713-300 Hand Pump for Setting Bleed-Offs, 0-30 PSI
    x
                Quick and accurate setting of bleed-offs. You no longer have to wait for the tire to bleed down. 
  • RapidAir M8010 Maxline Air Hose Tee Fitting, 1/2 Inch
    RapidAir M8010 Maxline Air Hose Tee Fitting, 1/2 Inch
    x
                

    RapidAir Maxline industrial compressed air piping systems are fast and easy to install. They feature leakproof, corrosion resistant fittings that are built to last.  These air hose connectors work great for your workshop with applications from automotive to woodworking. No special tools required, simply push the flexible tubing into the fittings and put up your system in an afternoon.

    • Use to create outlet drops or splice in straight tubing
    • Nickel plated brass for long lasting reliability
    • Double o-ring design to insure no air leakage
    • No expensive tools required
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils
    • Included in our Maxline Air Hose Outlet Kits

    Maxline Brochure (PDF)

    Maxline Installation Instructions (PDF)

    RapidAir Maxline Warranty (PDF) 

  • Power Steering Tank Accessory Bracket
    Power Steering Tank Accessory Bracket
    x
                
    Power Steering Tank Accessory Bracket
  • Intercomp 100675 Digital Shock Pressure Gauge
    Intercomp 100675 Digital Shock Pressure Gauge
    x
                If you are serious about shock tuning and rebuilding, you really need one of these gauges from Intercomp. Digital gauge reads to 300 psi in 1/2 lb. increments and allows you to fill and bleed accurately every time. Extremely accurate compared to a standard dial gauge.
            
  • Tire Groover Iron Blades, 12 Pack
    Tire Groover Iron Blades, 12 Pack
    x
                Blades for grooving iron sold 12 per  package.  For use with grooving irons listed below.
    • 445-250 - Tru-Hot grooving iron
    • 445-251 - Ideal grooving iron
    • 910-82065 - Econ-o-siper
  • Longacre 50544 Tire Durometer
    Longacre 50544 Tire Durometer
    x
                

    Tire hardness has a huge affect on your car's performance. A tire too hard won't bite and a tire too soft may wear quickly or even ball up. Also tire hardness changes during its life cycle. To run your best you must keep track of all your tire's hardnesses. This easy-to-use tool will help you do just that - quickly, accurately & easily.

    • Reads from 0-100 points
    • Comes with pouch
  • Ten-Shock Trailer Mount Rack
    $104.99
    Product Rating: 3.00 Stars
    Ten-Shock Trailer Mount Rack
    x
                

    Keep your spare race shocks organized, clean and easily accessible with one of these simple shock racks. Precision-machined aluminum stems use O-rings to hold each shock in place, while powdercoated mounting straps are easy to hang in your trailer or shop.

  • Tire Bleeder Setting Tank
    $124.99
    Tire Bleeder Setting Tank
    x
                Finally, a tool to make it easy to set your tire bleeders and to ensure bleeder accuracy.
            
  • Large Sheet Metal Scribe
    $6.99
    Product Rating: 5.00 Stars
    Large Sheet Metal Scribe
    x
                Simplify your metal working jobs with this new tool.  Simply run the tool down the edge of your material allowing the needle to locate perfectly measured lines every time.  Stainless Steel construction.  Measures .50", .75", 1", 1.5", and 2" depths.
            
  • Speedway Dual Gauge Leakdown Tester
    Speedway Dual Gauge Leakdown Tester
    x
                

    This dual gauge is ideal to check leak down and set barrel valves on fuel injection systems without running the engine. Detects ring seat failure, bent valves, cracked heads, and leaking gaskets. Works best with 100+ psi air source.

    Includes a 21" quick-disconnect hose to connect from the gauge to the spark plug hole. The threads on the the spark plug end are 14mm with an O-ring seal.

    913-81121 Instructions (PDF)

  • Precision Piston Ring Filer
    $39.99
    Product Rating: 4.43 Stars
    Precision Piston Ring Filer
    x
                

    Set ring end gap with this exclusive filer. Features carbide grinding wheel and cuts chrome plated stainless steel quickly and accurately. Can be mounted to any work bench.

  • Deluxe 110 Volt 250 Watt Grooving Iron
    Deluxe 110 Volt 250 Watt Grooving Iron
    x
                

    These 110 volt, 250 watt pistol grip grooving irons by Ideal Heated Knives come with a number 4 head and blades. Works great as a heated siper when you turn the blades upside down. Different size heads and blades sold separately.

    Made in the U.S.A. Includes (1) #4 head and (1) package of #4 blades. Different size heads and blades sold separately.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 23