Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Tools At Speedway Motors

Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.

Featured Products
Intercomp SW500 E-Z Weigh Scales
$1,039.99
Product Rating: 5.00 Stars
Intercomp SW500 E-Z Weigh Scales
(Part #300500)
x
            

Free Scale Box with Purchase! A $250 Value!

  • Displays Setups to One-Hundredth of a Percent!
  • Stores 100 Chassis Setups
  • Baseline Setup Recall
  • User Selectable Display Modes
  • View Any Combination of Scale Pad Weight & Percentage
  • Center of Gravity Calculation
  • Target Tune Feature
  • Certified to 0.1% Accuracy 
  • Standard 9-volt Battery Operation
  • RS232 Output
  • Giant 0.5" Display Characters
  • 1,500 lb (700 kg) Pad Capacity
  • 6,000 lb (2,800 kg) System Capacity
System Includes:
  • 15"x15"x2.5" (381x381x64mm) Billet Scale Pads
  • 9-Volt Battery
  • 2-Year Warranty
  • Case for electronic box

 

 

 

Intercomp SW650 Quick Weigh Wireless Scales
Intercomp SW650 Quick Weigh Wireless Scales
(Part #300650)
x
            

The Intercomp SW650 Chassis Scale is loaded with features and will display setups to one hundredth of a percent.

  • Fully Integrated RFX Wireless Weighing Technology
  • Encryption Ensures Secure Wireless Communication
  • USB & RS232 Output
  • Certified to 0.1% Accuracy
  • Stores 100 Chassis Setups
  • Baseline Setup Recall
  • Center of Gravity Calculation
  • User Selectable Display Modes
  • Target Tune Feature
  • Giant 0.5" Display Characters
  • Backlit for Low-Lighting Conditions
  • View Any Combination of Scale Pad Weight & Percentage

Includes a FREE scale storage box! (part # 910-82100, included with the purchase of this scale system)

Longacre 72601 DX1 Scale System
$1,074.99
Product Rating: 5.00 Stars
Longacre 72601 DX1 Scale System
(Part #47572601)
x
            
  • Shows all 4 wheel weights on separated displays for easiest viewing
  • High quality Red cables with AN connectors
  • Deluxe Silver carrying case protects electronics and stores cables
  • Includes 15" x 15" low profile scale pads - 1500 lbs per pad capacity (0.1% accuracy)
  • Four individual wheel weight displays
  • Large four-line display for all partial percentage and weights easily customized to your preferences
  • Instant recall memory for eight complete setups
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • Includes scale pad storage box
  • New advanced low power consumption electronics run on 2.9 volt batteries (included)
  • Control box includes the latest stabilization circuitry - numbers won't  jump around!
  • Two-year limited warranty
Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
(Part #47572701)
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty

"Open Wheel, Tools" Page 1 of 23

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    (Part #91081131)
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    (Part #91080304)
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    (Part #91381120)
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • GoJak Dollie Storage Rack
    $89.99
    GoJak Dollie Storage Rack
    (Part #880456)
    x
                

    Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.

    Rack shown with four GoJaks®, which are not included.

  • Casters for Engine Storage Stand, Set/4
    Casters for Engine Storage Stand, Set/4
    (Part #91081139)
    x
                Casters are 3" x 1-1/4" inch wide making rolling  easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at  300lbs.
            
  • Race Track Flag Set, 3 Ft. x 3 Ft.
    Race Track Flag Set, 3 Ft. x 3 Ft.
    (Part #91079050)
    x
                100% nylon racing track flags measure 3' x 3'. Each flag is mounted on a sturdy wooden dowel. Dowels measure 4' long and 17 mm in diameter.
            
  • POP Fasteners PS15-CS POP Hand Rivet Gun
    POP Fasteners PS15-CS POP Hand Rivet Gun
    (Part #91004010)
    x
                

    Ergonomic, jam free design with patented compound link that does the work for you. 50% easier to use than any other hand rivet tool on the market.

    • Robust aluminum casting with vanadium steel handle
    • Setting capacity: aluminum rivets up to 3/16" body diameter
    • Contoured handle grips for comfort
    • Rivet retaining handle design for one-handed riveting
    • Supplied with nosepieces for 3/32", 1/8", 5/32" & 3/16" rivets
    • Supplied nosepiece wrench
    • Length: 9.65"
    • Weight: 1.3 lbs.

    Hand Rivet Gun Instructions (PDF)

  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    (Part #2367000)
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

     

  • Heads for Grooving Iron
    $12.99
    Heads for Grooving Iron
    (Part #91082061)
    x
                

    Grooving Iron heads for grooving irons listed below.

    • 445-250 - Tru-Hot Grooving Iron
    • 445-251 - Ideal Grooving Iron
    • 910-82065 - Econ-o-siper

    Grooving Iron Replacement Heads and Blades Application Chart

  • MINI BENDER 1/8 3/16 1/4
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    MINI BENDER 1/8 3/16 1/4
    (Part #72851503)
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    (Part #9161000)
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Tire Stagger Tape, 10 Feet
    $5.99
    Tire Stagger Tape, 10 Feet
    (Part #91082015)
    x
                Stagger tape features thumb locking feature. 10' long, 1/4" wide steel tape. Use to measure tire circumference. 
            
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    (Part #9103800)
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    (Part #9501300)
    x
                Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. Also available in diaphragm style.
            
  • Saldana Racing WW-S20 Outlaw Sprint Lug Knock-Off Wrench Tool
    Saldana Racing WW-S20 Outlaw Sprint Lug Knock-Off Wrench Tool
    (Part #94082314)
    x
                

    Allows for easy removal of lug nuts. Lightweight, strong and durable aluminum construction for longevity. Wheel wrench features a 12 point socket.

  • Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    (Part #91082031)
    x
                

    Aluminum clipboard with rubber feet holds stopwatches at an angle for easy viewing. Includes one pad of timing sheets, a pen, and one Robic SC-505 stopwatch.

    Operation Instructions (PDF) 

  • RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    (Part #9106030)
    x
                These airline kits work great for your workshop with  applications from    automotive to woodworking. This is just the airline for your   compressed air   distribution system that is designed to easily install  within new walls   or on wall surfaces of existing  workshops/garages.   You can put these air lines exactly where  you want them, just like  electrical   outlets.   No more dragging hoses  across the shop to your  work area.     No special tools required, simply push the flexible  tubing into your   fittings (sold separately) and put up your system in  an afternoon.
    • 3/4" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Includes:  

    • 100 ft. of 3/4" ID Tubing

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • DLX BRAKE FLARE TOOL
    $239.99
    Product Rating: 5.00 Stars
    DLX BRAKE FLARE TOOL
    (Part #91170081)
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    (Part #9103232)
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    (Part #72811663)
    x
                These 5lb magnetic pick up tools will telescope from 6-1/2" to 33" and are ideal for retrieving dropped parts, fasteners, and tools. They feature a 3/4" diameter head with a comfortable textured cushion grip. 
    • 5lb telescoping magnetic pick up tool
    • 5lb magnet with shielded sides for targeted pick-ups
    • 3/4" Diameter head
    • Telescopes from 6-1/2 to 33"Ideal for retrieving dropped parts, fasteners and tools.
    • Comfortable textured cushion grip
  • Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    (Part #91000964)
    x
                Made of high-compression, rubberized material. Fits most two-ton to six-ton jack stands. Measures 1-1/4" wide x 4-1/4" long on the inside.
            
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.00 Stars
    Longacre Accuset II Scale Kit
    (Part #47572593)
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Stromberg Carburetor Jet Wrench
    Stromberg Carburetor Jet Wrench
    (Part #91081106)
    x
                This jet wrench is built to fit original Stromberg carburetor jets. Aftermarket Stromberg jets are approximately 0.011" thicker. You can lightly tap the wrench onto aftermarket jets to initially remove the jet, and then simply file the 2 flat sides until the wrench fits the jet properly. 
            
  • Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    (Part #94082752)
    x
                

     No need for old individual set up blocks. These adjustable blocks will do the trick of many other sets in one. For any type of Sprint Car, Midget or Micro.

    • Adjustable in 1/8" increments. 
    • Magnetic. 
  • Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    (Part #9109989)
    x
                These dry erase boards are great for making notes at the track or  in the garage.  Their convenient 17-1/2" x 19-1/2" size make them easy  to transport. 
    • Stamped aluminum
    • 17-1/2" tall x 19-1/2" wide
  • Valve Spring Tester
    $195.99
    Valve Spring Tester
    (Part #91681150)
    x
                Black anodized aluminum. Most convenient Valve Spring Tester on the market. Set spring height once and test as many springs as you want, with little effort. Handles up to 600 lb. springs.
            
  • 1 Inch Spring Loaded Speed Socket
    1 Inch Spring Loaded Speed Socket
    (Part #91082342)
    x
                

    This spring loaded speed socket is the socket of choice of the Big Boys. Unique design allows you to 'hold the trigger down' while removing lug nuts.

    It's also spring loaded to eject the lug nut fast allowing you to go to the next one. 1/2" drive.

  • Titan Tools 17350 7-Piece Ratcheting Combination Wrench Set, SAE Sizes
    Titan Tools 17350 7-Piece Ratcheting Combination Wrench Set, SAE Sizes
    (Part #72817350)
    x
                
    • SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", & 3/4" wrenches
    • 72 fine-tooth ratchet design for fast performance
    • Less than 5 degree sweep for use in tight spots
    • Chrome vanadium steel
    • Reusable storage rack
  • Proform 67649 Billet Aluminum Scale Ramps
    Proform 67649 Billet Aluminum Scale Ramps
    (Part #58667649)
    x
                
    • Black anodized billet aluminum scale ramps
    • Peak height is 2 3/8”
    • Set of 4
  • Performance Tool W54220 Grease Suction Gun
    Performance Tool W54220 Grease Suction Gun
    (Part #91083225)
    x
                Great for filling or emptying rear ends and trannys.  You shouldn't be without one!
            
  • Longacre 50883 Tire Marking Pen
    Longacre 50883 Tire Marking Pen
    (Part #47550882)
    x
                

    Writes directly on the tire's surface to easily remember tire sizes or other measurements.

    • Makes a finer line, easy to read
    • Mark tire sizes, pressures, etc.
    • Silver marking won't come off from heat
  • Standard Workbench Tool Organizer Kit, Wall Control Storage System
    Standard Workbench Tool Organizer Kit, Wall Control Storage System
    (Part #91030400)
    x
                Over 10.5 sq. ft. of storage space and assorted  shelving options, hooks and brackets. The standard workbench provides  the superior, easy access storage needed for a safe and efficient  workspace.

    Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage. 

    Included:
    • (3) Combo panels 32" x 16"
    • (1) 9" shelf assembly with dividers
    • (1) 6" shelf assembly
    • (3) Plastic bins with bin hanger
    • (1) Screwdriver holder assembly
    • (1) Hammer bracket
    • (20) Assorted hooks & brackets
    • Mounting hardware & instructions
    • Choose from red, white, blue, or black
  • Swivel Mount D-Ring
    $24.99
    Swivel Mount D-Ring
    (Part #91089141)
    x
                

    Swivel mount D-rings for tie-down attachment. 6-1/4" in diameter. Mounting holes across from each other are 5-1/2" center to center.

  • PipeMaster P-T1125 Contour Gauge for 1-1/8 Inch O.D. Tubing
    PipeMaster P-T1125 Contour Gauge for 1-1/8 Inch O.D. Tubing
    (Part #91086112)
    x
                

    Fabricating roll cages, tube chassis and countless other race car or hot rod components just got a lot easier with PipeMaster tube contour gauges.

    These simple-to-use tools help you lay out complicated tube joints in seconds and save time and material by providing accurate cut lines. Sturdy contruction features stainless steel pins, an aluminum inner shell and rugged ABS housing.

    Instruction Sheet (PDF)

  • Triangular Red Funnel with Fliter
    Triangular Red Funnel with Fliter
    (Part #458101)
    x
                

    Triangular shape funnel allows fast flow. Features large 13" opening and anti-slosh lip. Red only.  With filter.

  • Ratchet Tie Downs w/ Axle Strap, 10, 000/3, 000 LB. (EA)
    Ratchet Tie Downs w/ Axle Strap, 10, 000/3, 000 LB. (EA)
    (Part #4701081)
    x
                

    Individual ratchet tie downs feature a built-in axle strap. Makes trailering any vehicle quick and easy. Items are sold individually (each).

    Rated at breaking strength (lbs.) & working load limit (lbs.).

  • Titan Tools 17067 13-Piece Mini File Set
    Titan Tools 17067 13-Piece Mini File Set
    (Part #72817067)
    x
                
    • 12 high strength carbon steel files
    • Ergonomic interchangeable handle with quick release
    • Durable nylon pouch
    • Includes flat, triangle, flat-point, knife-type, square, barette
  • Performance Tool W41032 Engine Lift Chain
    Performance Tool W41032 Engine Lift Chain
    (Part #91089435)
    x
                24 inches of heavy duty 1000 lb load chain. 
            
  • FORGED ALUM SPANNER WRENCH
    $22.99
    Product Rating: 4.00 Stars
    FORGED ALUM SPANNER WRENCH
    (Part #91082156)
    x
                

    This forged aluminum spanner wrench tool makes coil-over adjustments easier than ever.

  • COLOR MINI BIAS GAUGES
    $69.99
    COLOR MINI BIAS GAUGES
    (Part #47544126)
    x
                

    These lightweight aluminum panels come with (2) 1-1/2" 1500 psi liquid filled gauges and fittings with bleeders.

    • 1/8" NPT on the Gauge Panel
    • Bias Gauge comes with 1/8" to 3/8-24 inverted flare adapters
    • Gauges:
      • Brand:    AccuTech™
      • Style:    Analog
      • Type:    Brake Pressure
      • Range:    0-1500 psi
      • Size:    1-1/2" diameter
      • Face Color:    White
      • Bezel Color:    Silver
      • Liquid Filled:    Yes
      • Quantity:    2
    • Panel:
      • Material:    Aluminum
      • Dimensions:    4-1/2" x 3"
      • Mount Style:    Vertical
      • Fittings Included:    Yes
      • Bleeders Included:    Yes
Goto Previous PagePrevious Page
1 2 3 4 5 ... 23