Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 47

Products

Tools

Shop Open Wheel Tools At Speedway Motors

Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.

Featured Products
  • Speedway Air Riveter
    $49.99
    Product Rating: 4.91 Stars
    Speedway Air Riveter
    (Part #91004004)
    x
                Rivet like a pro with this heavy duty air riveter. Allows fast assembly and repair of body panels. Includes nose pieces for 3/16", 5/32", 1/8", and 3/32" pop rivets.
            
  • Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    (Part #91004002)
    x
                

    Cleco pins are a definite must for sheet metal fabrication. They're basically spring-loaded, removable pop rivets that allow you to hold two pieces of sheet metal together in proper alignment for drilling or riveting. They work great for Circle Track use for test-fitting panels before they're permanently attached to your vehicle.

    The pins work with thicknesses of up to 1/4 in.

    Steel Cleco Fasteners

    • 3/16 Inch
    • Pack/10
  • Titan Tools 17203 Premium Quality Screw Driver Set - 26 Piece
    New
    Titan Tools 17203 Premium Quality Screw Driver Set - 26 Piece
    (Part #72817203)
    x
                

    Check out this premium quality screw driver set from Titan Tools. This set includes 26 pieces.

    Set includes:

    • (7) Slotted: 1/4" x 1-1/2", 1/8" x 3", 5/32" x 4", 3/16" x 3", 1/4" x 6", 5/16"x 6", 5/16" x 8"
    • (5) Star: T10 x 3", T15 x 4", T20 x 4", T25 x 4", T27 x 4"
    • (9) Phillips: PH00 x 3", PH0 x 3", PH1 x 4", PH2 x 1-1/2", PH2 x 4", PH2 x 6", PH3 x 6", PH3 x 6", PH3 x 8"
    • (3) Square: S1 x 4", S2 x 4", S3 x 4"
    • Straight Pick
    • Offset Pick
    • Plastic rack + clamshell
  • Cam Bearing Driver
    $25.99
    Product Rating: 4.43 Stars
    Cam Bearing Driver
    (Part #91381102)
    x
                Remove and replace your S/B Chevy and 90° V6 cam bearings without damage to the bearings. 

    Note: Always remove cam bearings when boiling or cleaning block.

    913-81102 Instructions (pdf)

  • Stromberg Carburetor Jet Wrench
    Stromberg Carburetor Jet Wrench
    (Part #91081106)
    x
                This jet wrench is built to fit original Stromberg carburetor jets. Aftermarket Stromberg jets are approximately 0.011" thicker. You can lightly tap the wrench onto aftermarket jets to initially remove the jet, and then simply file the 2 flat sides until the wrench fits the jet properly. 
            
  • Speedway Deluxe Quarter Turn Fastener Tool
    Speedway Deluxe Quarter Turn Fastener Tool
    (Part #91089402)
    x
                

    Stop using a screwdriver...it doesn't fit! This tool makes fast and easy work of removing and attaching panels fastened with 1/4-turn fasteners. Great gift idea!

    Measurement Guide (Link)

  • Intercomp SM656 iRaceWeigh Wireless Scale System
    $1,699.99
    $1,749.00
    New
    Intercomp SM656 iRaceWeigh Wireless Scale System
    (Part #300656)
    x
                

    This wireless scale system from Intercomp conveniently lets you scale your car using an iPhone, iPad, iPod touch, or any smartphone or tablet from Android™. It communicates with Intercomp scales through fully integrated RFX™ Wireless Weighing Technology providing you with complete control over your scales.

    • Fully Integrated RFX™ Wireless Weighing Technology
    • Free iRaceWeigh™ App Available on iTunes and Google Play
    • Wi-Fi Encryption Ensures a More Secure Wireless Connection
    • View & Save Live Weights
    • Email Saved Reports
    • Zero Scales and Change Units Right from Your Device
    • 1,500 lb (700 kg) Pad Capacity
    • 6,000 lb (2,800 kg) System Capacity
    • 400hr Average Battery Life in Pads
    • Certified to 0.1% Accuracy
    • Includes Free Scale Pad Storage Box with purchase

    Main Screen Shows:

    • Front Total & Percent
    • Rear Total & Percent
    • Left Total & Percent
    • Right Total & Percent
    • Cross LF/RR Total & Percent
    • Cross RF/LR Total & Percent
    • Rear Bite

    System Includes:

    • 15" x 15" x 2.5" (381 x 381 x 64mm) Wireless RFX™ Billet Pads
    • iRaceWeigh™ Module
    • AA Alkaline Batteries for Scale Pads
    • 2-Year Warranty
    • Free Scale Pad Storage Box

    Note: Smartphone, tablet or other compatible device not included

  • Small Block Chevy Engine Storage Stand
    Small Block Chevy Engine Storage Stand
    (Part #91681200)
    x
                

    Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.

    Note: Engine set up block is shown in photo for reference only and is not provided with the engine stand.

    Fits 1958-Up Small Block Chevy 283-400 engines.

Filter

"Open Wheel, Tools" Page 1 of 47

Page 1 of 47

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    (Part #91081131)
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    (Part #91080304)
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    (Part #91381120)
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • GoJak Dollie Storage Rack
    $89.99
    GoJak Dollie Storage Rack
    (Part #880456)
    x
                

    Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.

    Rack shown with four GoJaks®, which are not included.

  • Casters for Engine Storage Stand, Set/4
    Casters for Engine Storage Stand, Set/4
    (Part #91081139)
    x
                Casters are 3" x 1-1/4" inch wide making rolling  easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at  300lbs.
            
  • Race Track Flag Set, 3 Ft. x 3 Ft.
    Race Track Flag Set, 3 Ft. x 3 Ft.
    (Part #91079050)
    x
                100% nylon racing track flags measure 3' x 3'. Each flag is mounted on a sturdy wooden dowel. Dowels measure 4' long and 17 mm in diameter.
            
  • POP Fasteners PS15-CS POP Hand Rivet Gun
    POP Fasteners PS15-CS POP Hand Rivet Gun
    (Part #91004010)
    x
                

    Ergonomic, jam free design with patented compound link that does the work for you. 50% easier to use than any other hand rivet tool on the market.

    • Robust aluminum casting with vanadium steel handle
    • Setting capacity: aluminum rivets up to 3/16" body diameter
    • Contoured handle grips for comfort
    • Rivet retaining handle design for one-handed riveting
    • Supplied with nosepieces for 3/32", 1/8", 5/32" & 3/16" rivets
    • Supplied nosepiece wrench
    • Length: 9.65"
    • Weight: 1.3 lbs.

    Hand Rivet Gun Instructions (PDF)

  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    (Part #2367000)
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

    Rebate  Feb2 - March 31 2015 (PDF) 

     

  • Heads for Grooving Iron
    $12.99
    Heads for Grooving Iron
    (Part #91082061)
    x
                

    Grooving Iron heads for grooving irons listed below.

    • 445-250 - Tru-Hot Grooving Iron
    • 445-251 - Ideal Grooving Iron
    • 910-82065 - Econ-o-siper

    Grooving Iron Replacement Heads and Blades Application Chart

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    (Part #72851503)
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    (Part #9161000)
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Tire Stagger Tape, 10 Feet
    $5.99
    Tire Stagger Tape, 10 Feet
    (Part #91082015)
    x
                Stagger tape features thumb locking feature. 10' long, 1/4" wide steel tape. Use to measure tire circumference. 
            
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    (Part #9103800)
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    (Part #9501300)
    x
                Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. Also available in diaphragm style.
            
  • Saldana Racing WW-S20 Outlaw Sprint Lug Knock-Off Wrench Tool
    Saldana Racing WW-S20 Outlaw Sprint Lug Knock-Off Wrench Tool
    (Part #94082314)
    x
                

    Allows for easy removal of lug nuts. Lightweight, strong and durable aluminum construction for longevity. Wheel wrench features a 12 point socket.

  • Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    (Part #91082031)
    x
                

    Aluminum clipboard with rubber feet holds stopwatches at an angle for easy viewing. Includes one pad of timing sheets, a pen, and one Robic SC-505 stopwatch.

    Operation Instructions (PDF) 

  • RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    (Part #9106030)
    x
                These airline kits work great for your workshop with  applications from    automotive to woodworking. This is just the airline for your   compressed air   distribution system that is designed to easily install  within new walls   or on wall surfaces of existing  workshops/garages.   You can put these air lines exactly where  you want them, just like  electrical   outlets.   No more dragging hoses  across the shop to your  work area.     No special tools required, simply push the flexible  tubing into your   fittings (sold separately) and put up your system in  an afternoon.
    • 3/4" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Includes:  

    • 100 ft. of 3/4" ID Tubing

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Deluxe 45 Degree Brake Flaring Tool
    Deluxe 45 Degree Brake Flaring Tool
    (Part #91170081)
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



  • AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    New
    AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    (Part #9109011)
    x
                

    AVS Silver Face Single Needle Gauge is one of the best on the market. It features silver gauge face color and black lettering. Full sweep gauge range 0-200 psi.

    • Silver gauge face
    • Black Lettering
    • Dual Needle
    • Dome shaped glass
    • 2.20 inch diameter
    • Full sweep gauge range
    • 0-200 psi
    • 1/8" NPT threads
  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    (Part #9103232)
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
Goto Previous PagePrevious Page
1 2 3 4 5 ... 47