Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is your headquarters for Sprint and Midget racing wheels! We stock all the best beadlock wheels from the top manufacturers, as well as mud covers to fit them all. Find your 10-inch Mini Sprint wheels and more in our huge selection of parts. Check out our great selection of tire treatments, pressure gauges, grooving irons, tire sipers and bleed-offs, too!

Featured Products
Weld Racing P858-5044 15 x 10-1/4 Inch Wheel, Outer Half, Beadlock
Weld Racing P858-5044 15 x 10-1/4 Inch Wheel, Outer Half, Beadlock
x
            Outer half with lock.   

Replacement parts for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.

Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 6 Inch Offset
Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 6 Inch Offset
x
            

Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

Sander Wheel Application Chart (GIF)

Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


Sander Direct Mount Front Wheel, 15x9, 3 Inch Offset, No Beadlock/Cover
Sander Direct Mount Front Wheel, 15x9, 3 Inch Offset, No Beadlock/Cover
x
            

Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

Note: Sander wheel will not fit Weld hubs due to i/d - o/d clearance issue.  Must use Sander wheel on Sander hub only.  Please order wheels by the chart below to get the correct direct mount front wheel.

Wheel sold as:   Will actually measure:
3" off wheel          4" off wheel
4" off wheel          5" off wheel
5" off wheel          6" off wheel
6" off wheel          7" off wheel

Sander Direct Mount Front Wheel Chart Application (GIF)

Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


 

Weld Racing 15 x 16 Splined Rear Wheel - Outer Half - 6 Inch Offset
Weld Racing 15 x 16 Splined Rear Wheel - Outer Half - 6 Inch Offset
x
            Outer half with lock.   

Replacement parts for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.

  • 9.25" outer-beadlock with quarter turn fastener tabs
  • Cover not included

"Open Wheel, Tire and Wheel" Page 1 of 13

  • TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    x
                This 24pc kit of (12) hex flange bolts and (12)  thin steel nuts is arguably the best titanium investment for Micro  Sprint Racers. Not only do these meet our $200/lb-saved rule of thumb,  but the large rotating diameter where these bolts are applied makes for  exceptional return-on-investment in speed!
    • 12 of 1/4"-20 x 1", Hex Head Bolt
    • 12 of 1/4" AN Thin Washer, Steel
  • Sander Engineering 1-4 Inner Wheel Half, 13 x 4 Inch, Non-Beadlock
    Sander Engineering 1-4 Inner Wheel Half, 13 x 4 Inch, Non-Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    Sander Wheel Half Application Chart (GIF)

  • Ernst Mfg 975 Ultraflex Wheel Protector
    Ernst Mfg 975 Ultraflex Wheel Protector
    x
                

    The last thing you want is tire polish getting on your rims. Now you can throw away those home-made cardboard wheel protectors. This durable, plastic shield covers 13" to 16" rims. Simply squeeze the handle to accommodate smaller wheels, and push against the wheel to flare out for larger wheels.

  • Winters Performance 7424 Pro-Eliminator Midget Bearing Cap O-Ring
    Winters Performance 7424 Pro-Eliminator Midget Bearing Cap O-Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    Pro Eliminator Rear End Part Guide (Link)

  • Quick Stick Wheel Weights, Reg 5 Strips
    Quick Stick Wheel Weights, Reg 5 Strips
    x
                

    Unlike others, these self adhesive weights are in 3 oz strips with 1/4 oz segments.  Regular strips are 1/2" wide while the low profile are 3/4" wide.

    Reg 5 Strips

  • Bolt Circle Template
    $3.99
    Product Rating: 4.67 Stars
    Bolt Circle Template
    x
                

    This bolt circle template eliminates the need to guess what bolt pattern wheels, hubs or rear axles are. Includes 5 on 4-1/2", 5 on 4-3/4", 5 on 5" and 5 on 5-1/2".  Made of high impact plastic.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    x
                

    Save weight and lighten your rotating mass with these full thread 5/16"-18 coarse thread x 1.25" long titanium bolts for beadlock wheel rings. Titanium has the highest strenth-to-weight ratio of any metal. This hex head titanium bolt is made from 6AL/4V material, which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-18 x 1-1/4"
    • 1/2" Hex Head
    • Full Thread
    • Application: bead lock 

     

  • 4 PC Mini-Sprint Splined Spacer Kit
    4 PC Mini-Sprint Splined Spacer Kit
    x
                Four 30° tapered axle spacers for 27 spline axles. Lengths include: 2 – 3/4”, 1 – 1”, and 1 – 2”. 
            
  • Steel Valve Stems - Set of 4
    $11.99
    Product Rating: 2.50 Stars
    Steel Valve Stems - Set of 4
    x
                Bolt-in steel cap valve stems. Most steel racing wheels  use the larger diameter .625 valve stems. The bolt-in stems come with  gaskets to fit both .453 and .625 diameter rim holes. Sold in sets of four.
            
  • Trailer Wheel Stop
    $11.99
    Product Rating: 4.50 Stars
    Trailer Wheel Stop
    x
                

    Diamond plate aluminum stops. Prevents car from rolling into tool box, tire rack, etc.

    Sold each.

  • Stop Pad for Sprint and Midget Race Cars
    Stop Pad for Sprint and Midget Race Cars
    x
                These stop pads will help ensure safety while racing.  They feature a flat contact surface for the bolt and their contour design snugs to the tube. They are made from quality material and are heat treated for durability. 
    • Flat contact surface for bolt
    • Contoured to tube
    • Heat treated for durability
  • Sander Engineering 1-5 Inner Wheel Half, 13 x 5 Inch, Non-Beadlock
    Sander Engineering 1-5 Inner Wheel Half, 13 x 5 Inch, Non-Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    Sander Wheel Half Application Chart (GIF)

  • Weld Racing P851-1030 Mini Sprint 10 Inch Wheel Half, No Beadlock, 10x3
    Weld Racing P851-1030 Mini Sprint 10 Inch Wheel Half, No Beadlock, 10x3
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Weld Racing P650-5314 15 Inch Beadlock Ring for Cover
    Weld Racing P650-5314 15 Inch Beadlock Ring for Cover
    x
                
    • Polished aluminum
    • Beadlock diameter: 15"
    • Mounting hardware not included
    • Has 16 mounting holes and quarter turn fastener mounting tabs for mud cover
  • Sander Engineering 13 Inch Midget Wheel Beadlock Ring with Cover
    Sander Engineering 13 Inch Midget Wheel Beadlock Ring with Cover
    x
                

    These 13 in. beadlock wheel lock rings with mud cover from Sander Engineering feature quarter turn fastener fasteners for simple mud cover attachment.  Sander beadlock kits are designed to self-center the tire on the rim. These rings are CNC laser-cut out of high-grade steel to ensure a proper fit every time. These mud covers prevent dirt and debris from collecting within your wheel, which can slow you down on the race track.

    Midget Wheel Beadlock Ring with Cover

    • 13 Inch 
    • High-grade steel ring
  • Spline Wheel Centers, 31 Spline
    Spline Wheel Centers, 31 Spline
    x
                Magnesium replacement center from Sander Engineering for Midget Wheels.
            
  • Weld Racing P856-5458 Wheel Inner Half, Non-Beadlock, 15 x 4.63 Inch
    Weld Racing P856-5458 Wheel Inner Half, Non-Beadlock, 15 x 4.63 Inch
    x
                Inner half without beadlock. 

    Replacement parts for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.

  • Sander Inner Wheel Half, 13 x 3 Inch, Non-Beadlock
    Sander Inner Wheel Half, 13 x 3 Inch, Non-Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    Sander Wheel Half Application Chart (GIF)

  • TI64 353 Titanium Beadlock Bolt Kit, 5/16-18 x 1 Inch Thread
    TI64 353 Titanium Beadlock Bolt Kit, 5/16-18 x 1 Inch Thread
    x
                This 32pc kit of (16) hex bolts and (16) thin steel  washers is arguably the best titanium investment for sprint and midget  racers. Not only do these meet our $200/lb saved rule of thumb, but the  large rotating diameter where these bolts are applied makes for  exceptional return on investment in speed!
    • Kit includes
      • (16) of 5/16"-18 x 1", hex head bolts
      • (16) of 5/16" AN thin steel washers
  • Sander Plain Outer 15 Inch Wheel Half, 15 x 3, No Beadlock
    Sander Plain Outer 15 Inch Wheel Half, 15 x 3, No Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander wheel halves do not include lock ring or cover. See chart for replacements.

    Sander Outer Half Wheel Chart Application (GIF)
     

  • Weld Racing P650-4514A 15 Inch Mud Plug Cover
    Weld Racing P650-4514A 15 Inch Mud Plug Cover
    x
                

    Sprint 15" mud cover by Weld. Sold each.

    • Polished aluminum
    • Weighs 1.1 lb


    Has a hole in the middle for you to hold onto the cover while attaching/removing it from the wheel.

  • Rubber Valve Stems for .625 Inch Hole, Set/4
    Rubber Valve Stems for .625 Inch Hole, Set/4
    x
                

    Push-in rubber valve stems for a .625" hole. Measures 1.25" from the wheel to the valve stem cap and the overall length is 1.807".

    Sold in sets of four.

  • Weld Racing P650-5275 15 Inch Beadlock Ring, No Cover
    Weld Racing P650-5275 15 Inch Beadlock Ring, No Cover
    x
                Weld Wheels Bead Lock. Does not come with quarter turn fastener springs. Used for Weld Racing left rears or inside double bead lock right rears.
            
  • Sander Direct Mount Front Wheel, 13x7, 4 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 13x7, 4 Inch Offset, No Beadlock/Cover
    x
                

    No beadlock - No Cover

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    13" Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 4 Inch Offset
    Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 4 Inch Offset
    x
                

    Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander Wheel Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


  • Weld Racing 15 x 8 Inch Sprint Car Direct Mount Front Wheel, 4 Inch Offset
    Weld Racing 15 x 8 Inch Sprint Car Direct Mount Front Wheel, 4 Inch Offset
    x
                

    This can be used with any brand of direct mount hub.  Exclusive "Roll Forged" rim lip increases bead seat strength - keeps rim rigid and round on the most abusive racing surfaces

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:           Will actually measure:

    3" off wheel measures 4" backspace
    4" off wheel measures 5" backspace
    5" off wheel measures 6" backspace
    6" off wheel measures 7" backspace

    Weld Sprint Front Wheels Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

     

     

     


     

  • Weld Magnum 27 Spline 10 x 12 Inch Wheel, Beadlock and Cover, 4 Inch Offset
    Weld Magnum 27 Spline 10 x 12 Inch Wheel, Beadlock and Cover, 4 Inch Offset
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Weld Racing 13 x 8 Direct Mount Front Wheel, Non Beadlock, 3 Inch Offset
    Weld Racing 13 x 8 Direct Mount Front Wheel, Non Beadlock, 3 Inch Offset
    x
                

    Weld front direct mount 13" wheels with no lock. Several offsets available.

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    x
                

    Outer halves with beadlock.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

  • Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    x
                

    These quality O-rings from Stallard Chassis are designed for use with our dust cover for 2.020" diameter hubs.

    • Seals out dirt and dust from entering hub bearings
    • Durable rubber material construction
    • For use with 2.020" diameter front hubs
  • Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander wheel halves do not include lock ring or cover. See chart for replacements.

    Sander Outer Half Wheel Chart Application (GIF)
     

  • Weld Racing P857-5924 15 x 9-1/4 Inch Wheel, Outer Half, Beadlock
    Weld Racing P857-5924 15 x 9-1/4 Inch Wheel, Outer Half, Beadlock
    x
                Outer half with lock.   

    Replacement parts for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.

    • 9.25" outer with beadlock
    • Will not accept cover
  • Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Sander Engineering 10-020 10 Inch Lock Ring for Cover
    Sander Engineering 10-020 10 Inch Lock Ring for Cover
    x
                This Sander 10" Number 2 wheel lock ring with mud cover mounts is lightweight, strong, and anodized red for long life with easy maitenance. 
            
  • Weld Racing 13 x 10 Inch Magnum Midget Spline, Non Beadlock, 1 Inch Offset
    Weld Racing 13 x 10 Inch Magnum Midget Spline, Non Beadlock, 1 Inch Offset
    x
                

    These 13" Weld racing wheels are 36 spline with no lock.  Several offsets available.   

    • 36 spline forged aluminum center
    • Exceeds USAC Wheel Standards and specifications for all racing series 
    • Forged aluminum alloy center, splined and 100% CNC machined to exacting tolerances for perfect balance
    • Exclusive "Roll Forged" rim lip increases bead seat strength-keeps rim rigid and round on the most abusive racing surfaces
    • Made in Kansas City, USA

    Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    x
                

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Weld Splined Double-Beadlock Rear Wheel - 15 x 18, 5 Inch Offset
    Weld Splined Double-Beadlock Rear Wheel - 15 x 18, 5 Inch Offset
    x
                

    15" splined rear sprint car wheels with double beadlocks. The double beadlocks keep tires from spinning on the wheel when you are really hooked up. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

     

  • Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    x
                

    Beadlock - No covers

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 13