Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 26

Products

Tire and Wheel

Shop Open Wheel Tires & Wheels At Speedway Motors

Speedway Motors is your headquarters for Sprint and Midget racing wheels! We stock all the best beadlock wheels from the top manufacturers, as well as mud covers to fit them all. Find your 10-inch Mini Sprint wheels and more in our huge selection of parts. Check out our great selection of tire treatments, pressure gauges, grooving irons, tire sipers and bleed-offs, too!

Featured Products
  • Trailer Wheel Stop
    $11.99
    Product Rating: 4.67 Stars
    Trailer Wheel Stop
    (Part #91658100)
    x
                

    Diamond plate aluminum stops. Prevents car from rolling into tool box, tire rack, etc.

    Sold each.

  • Bolt Circle Template
    $3.99
    Product Rating: 4.77 Stars
    Bolt Circle Template
    (Part #91082027)
    x
                

    This bolt circle template eliminates the need to guess what bolt pattern wheels, hubs or rear axles are. Includes 5 on 4-1/2", 5 on 4-3/4", 5 on 5" and 5 on 5-1/2".  Made of high impact plastic.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Rubber Valve Stems for .625 Inch Hole, Set/4
    Rubber Valve Stems for .625 Inch Hole, Set/4
    (Part #91058520)
    x
                

    Push-in rubber valve stems for a .625" hole. Measures 1.25" from the wheel to the valve stem cap and the overall length is 1.807".

    Sold in sets of four.

  • Steel Valve Stems - Set of 4
    $11.99
    Product Rating: 3.33 Stars
    Steel Valve Stems - Set of 4
    (Part #91058500)
    x
                Bolt-in steel cap valve stems. Most steel racing wheels  use the larger diameter .625 valve stems. The bolt-in stems come with  gaskets to fit both .453 and .625 diameter rim holes. Sold in sets of four.
            
  • Weld Racing P650-4514A 15 Inch Mud Plug Cover
    Weld Racing P650-4514A 15 Inch Mud Plug Cover
    (Part #8156504213)
    x
                

    Sprint 15" mud cover by Weld. Sold each.

    • Polished aluminum
    • Weighs 1.1 lb


    Has a hole in the middle for you to hold onto the cover while attaching/removing it from the wheel.

  • Stop Pad for Sprint and Midget Race Cars
    Stop Pad for Sprint and Midget Race Cars
    (Part #91637053)
    x
                These stop pads will help ensure safety while racing.  They feature a flat contact surface for the bolt and their contour design snugs to the tube. They are made from quality material and are heat treated for durability. 
    • Flat contact surface for bolt
    • Contoured to tube
    • Heat treated for durability
  • Moroso 46160 Wheel Studs, 7/16-20 x 2-7/8 Inch, .560 In Knurl
    Moroso 46160 Wheel Studs, 7/16-20 x 2-7/8 Inch, .560 In Knurl
    (Part #54546160)
    x
                

    These wheel studs manufactured from Moroso are made of a high strength steel. Their press-in design makes them stronger than stock. These wheel studs are sold in sets of 5.

    • Exceeds sanctioning bodies requirements on the use of extra-long wheel studs with thick-hub racing wheels
    • Manufacturing from high grade SAE 8740 steel to withstand sheet loads of 190,000 psi (which exceeds Grade 8 specifications)
    • 5 per package
    • Made in the U.S.A.
    • All stud lengths are measured from the base of the knurl to the end of the stud.
    • 0.560" knurl dia. for standard hole size 0.552" to 0.559"
    • Works great with Currie 9+ Axles
    • 7/16" threads
    • 2-7/8" length
    • Fits many late model GM disc brake and early drum brake applications
  • Moroso 46150 Press-In Wheel Studs, 7/16-20 x 2-7/8 Inch, .480 Inch Diameter
    Moroso 46150 Press-In Wheel Studs, 7/16-20 x 2-7/8 Inch, .480 Inch Diameter
    (Part #54546150)
    x
                

    This wheel stud manufactured from Moroso is made of a high strength steel. Its press-in design makes it stronger than stock. These wheel studs are sold in sets of 5.

    • Studs are longer than sanctioning bodies require for the use of extra-long studs with thick-hub racing wheels
    • Constructed from SAE 8740 Steel to withstand sheet loads of 190,000 psi (which exceeds Grade 8 specifications)
    • Fits: Most late model GM drum brake applications
    • Standard hole size: .472" to .479"
    • 5 per package
    • Made in the USA!

    Note: All stud lengths are measured from the base of the knurl to the end of the stud.

Filter

"Open Wheel, Tire and Wheel" Page 1 of 26

Page 1 of 26

  • Sander Direct Mount Front Wheel, 13x7, 4 In Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 13x7, 4 In Offset, No Beadlock/Cover
    (Part #62413074DN)
    x
                

    No beadlock - No Cover

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    13" Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 In, 4In Offset
    Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 In, 4In Offset
    (Part #62415154S1)
    x
                

    Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander Wheel Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


  • Weld Racing 15 x 8 In Sprint Car Direct Mount Front Wheel, 4 In Offset
    Weld Racing 15 x 8 In Sprint Car Direct Mount Front Wheel, 4 In Offset
    (Part #8158605814)
    x
                

    This can be used with any brand of direct mount hub.  Exclusive "Roll Forged" rim lip increases bead seat strength - keeps rim rigid and round on the most abusive racing surfaces

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:           Will actually measure:

    3" off wheel measures 4" backspace
    4" off wheel measures 5" backspace
    5" off wheel measures 6" backspace
    6" off wheel measures 7" backspace

    Weld Sprint Front Wheels Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

     

     

     


     

  • Weld Magnum 27 Spline 10 x 12 In Wheel, Beadlock and Cover, 4In Offset
    Weld Magnum 27 Spline 10 x 12 In Wheel, Beadlock and Cover, 4In Offset
    (Part #81573411254)
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Weld Racing 13 x 8 Direct Mount Front Wheel, Non Beadlock, 3 In Offset
    Weld Racing 13 x 8 Direct Mount Front Wheel, Non Beadlock, 3 In Offset
    (Part #81586030813)
    x
                

    Weld front direct mount 13" wheels with no lock. Several offsets available.

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    (Part #8158511050)
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    (Part #62415L)
    x
                

    Outer halves with beadlock.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

  • Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    (Part #960151)
    x
                

    These quality O-rings from Stallard Chassis are designed for use with our dust cover for 2.020" diameter hubs.

    • Seals out dirt and dust from entering hub bearings
    • Durable rubber material construction
    • For use with 2.020" diameter front hubs
  • Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    (Part #624111)
    x
                

    Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander wheel halves do not include lock ring or cover. See chart for replacements.

    Sander Outer Half Wheel Chart Application (GIF)
     

  • Weld Racing P857-5924 15 x 9-1/4 Inch Wheel, Outer Half, Beadlock
    Weld Racing P857-5924 15 x 9-1/4 Inch Wheel, Outer Half, Beadlock
    (Part #8158575924)
    x
                Outer half with lock.   

    Replacement parts for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.

    • 9.25" outer with beadlock
    • Will not accept cover
  • Weld P857-5844 Sprint Wheel Rim Shell Outer Half, 15 x 8.25, Beadlock
    New
    Weld P857-5844 Sprint Wheel Rim Shell Outer Half, 15 x 8.25, Beadlock
    (Part #8158575844)
    x
                
    Check out these replacement rim shell outer halves for Weld Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel.
    • Beadlock, no cover
    • Aluminum construction
    • Polished finish
  • Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    (Part #62407L)
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Sander Engineering 10-020 10 Inch Lock Ring for Cover
    Sander Engineering 10-020 10 Inch Lock Ring for Cover
    (Part #62410020)
    x
                This Sander 10" Number 2 wheel lock ring with mud cover mounts is lightweight, strong, and anodized red for long life with easy maitenance. 
            
  • Weld Racing 13 x 10 In Magnum Midget Spline, Non Beadlock, 1 In Offset
    Weld Racing 13 x 10 In Magnum Midget Spline, Non Beadlock, 1 In Offset
    (Part #81573631011)
    x
                

    These 13" Weld racing wheels are 36 spline with no lock.  Several offsets available.   

    • 36 spline forged aluminum center
    • Exceeds USAC Wheel Standards and specifications for all racing series 
    • Forged aluminum alloy center, splined and 100% CNC machined to exacting tolerances for perfect balance
    • Exclusive "Roll Forged" rim lip increases bead seat strength-keeps rim rigid and round on the most abusive racing surfaces
    • Made in Kansas City, USA

    Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    (Part #62415185S2)
    x
                

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Weld Splined Double-Beadlock Rear Wheel - 15 x 18, 5 Inch Offset
    Weld Splined Double-Beadlock Rear Wheel - 15 x 18, 5 Inch Offset
    (Part #81573551845)
    x
                

    15" splined rear sprint car wheels with double beadlocks. The double beadlocks keep tires from spinning on the wheel when you are really hooked up. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

     

  • Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    (Part #62413103SN)
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    (Part #62413083D1)
    x
                

    Beadlock - No covers

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Engineering 1-05L 15 x 5 Inch Wheel Outer Half with Beadlock
    Sander Engineering 1-05L 15 x 5 Inch Wheel Outer Half with Beadlock
    (Part #624105L)
    x
                Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. 

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance good looks and long life.
  • Sander Direct Mount Front Wheel, 13x8, 4 In Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 13x8, 4 In Offset, No Beadlock/Cover
    (Part #62413084DN)
    x
                

    No beadlock - No Cover

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    13" Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 26