Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Tools At Speedway Motors

Nobody has more experience in open-wheel racing than Speedway Motors! It doesn’t matter whether you race 305, 360 or 410 series, or with the World of Outlaws or USAC, Speedway has the sprint car and midget parts you need - in stock and ready to ship. Be sure to check out our selection of parts for mini sprints and micro sprints, too.

"Open Wheel, Tire Bleeders" Page 1 of 1

New (0)

Garage Sale (0)

  • Conroy Pneu Control 4450K31 Bleeder Exhaust Muffler
    Conroy Pneu Control 4450K31 Bleeder Exhaust Muffler
    x
                Replacement exhaust muffler for Conroy Diaphragm bleeders.
            
  • Kwik Change Products 713-002 Quick Change Schrader Valves
    Kwik Change Products 713-002 Quick Change Schrader Valves
    x
                Quick release bleed-off valves are made of anodized aluminum, disconnect made of hi-impact plastic. Relief valve can be pre-set from 3 psi to 15 psi. This allows for adjustments in a matter of seconds by simply removing one valve and connecting another to the quick disconnect mounted in the wheel.
            
  • Conroy Diaphragm Bleeder Extractor
    Conroy Diaphragm Bleeder Extractor
    x
                Ever have problems pulling out your bleeders or have to use a pliers to pull them out? The Conroy Diaphragm bleeder extraction tool is specifically designed to make this job easier. 
            
  • Kwik Change Products Bleedoffs W/ Plastic Adapters - Set of 4
    Kwik Change Products Bleedoffs W/ Plastic Adapters - Set of 4
    x
                Quick release bleed-off valves are made of anodized aluminum, disconnect made of hi-impact plastic. Relief valve can be pre-set from 3 psi to 15 psi. This allows for adjustments in a matter of seconds by simply removing one valve and connecting another to the quick disconnect mounted in the wheel.
            
  • Conroy Diaghragm Bleeder Kit for Winters Midget Sprint Axle
    Conroy Diaghragm Bleeder Kit for Winters Midget Sprint Axle
    x
                

    Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. If you have ever lost a race because stagger went away, a Conroy Pneu Control will help you regulate it more accurately.

    The Conroy Pneu Control Diaphragm bleeder works on the same principal as a high speed by-pass. A preset spring pressure against a diaphragm controls the amount of air that is to pass through the port and it releases air instantly in a 360 degree pattern. You don't have to compensate for what you think it may bleed off at. It repeats within 2/10 of a pound. With 4 different springs, the bleeder has a range of 2 to 30 pounds.

    • Choose from axle sizes of 31 spline, 36 spline/1.625 i.d., and 36 spline/1.500 i.d.
    • Fits Winters midget rearends with 36 spline axle and 1-5/8" i.d. (36/1.625)
    • Fits Winters midget rearends with 36 spline axle and 1-1/2" i.d. (36/1.500)

    940-1301 Instructions (PDF)

  • Bleeder Inflation Valve
    $16.99
    Bleeder Inflation Valve
    x
                
    • Seat tire beads with ease using a bleeder receptacle for an inflation port
    • Machined to accept many universal and industrial "M" style air couplers
    • Durable black anodize finish
  • Kwik Change 714-1000 Next Generation Large Bleeders
    Kwik Change 714-1000 Next Generation Large Bleeders
    x
                This is the latest bleeder from Kwik Bleeders
    • Large size with dual springs.
    • Works with plastic or aluminum wheel adaptors
    • Extra O-rings and quad rings are available in sets of 4
  • Conroy Pneu Control 52065K215 Bleeder Straight Tube Fitting
    Conroy Pneu Control 52065K215 Bleeder Straight Tube Fitting
    x
                
    Straight tube fitting for Conroy Pneu Diaphragm style bleeders.
  • Kwik Change Products 715-2000 Generation II Bleeder Fitting
    Kwik Change Products 715-2000 Generation II Bleeder Fitting
    x
                This Kwik Change Generation II bleeder fitting features a gold anodized aluminum finish. It makes an easier job of bleeding lines with more settings and adjustments.
    • Includes hex adjusting cap for easier adjustments
    • Hex lock ring for increased security in fastening
    • Improved pressure settings, more consistency
    • Bleeders pops off when you need it
  • Kwik Change Products 713-100 Bleedoffs, Set/4
    Kwik Change Products 713-100 Bleedoffs, Set/4
    x
                Quick release bleed-off valves are made of anodized aluminum, disconnect made of hi-impact plastic. Relief valve can be pre-set from 3 psi to 15 psi. This allows for adjustments in a matter of seconds by simply removing one valve and connecting another to the quick disconnect mounted in the wheel.
            
  • Conroy Diaghragm Bleeder Kit for Winters Axle
    Conroy Diaghragm Bleeder Kit for Winters Axle
    x
                

    Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. If you have ever lost a race because stagger went away, a Conroy Pneu Control will help you regulate it more accurately.

    The Conroy Pneu Control Diaphragm bleeder works on the same principal as a high speed by-pass. A preset spring pressure against a diaphragm controls the amount of air that is to pass through the port and it releases air instantly in a 360 degree pattern. You don't have to compensate for what you think it may bleed off at. It repeats within 2/10 of a pound. With 4 different springs, the bleeder has a range of 2 to 30 pounds.

    940-1501 Instructions (PDF)

  • Kwik Change Products 713-007 Replacement Wheel Bleed Housing Grommet
    Kwik Change Products 713-007 Replacement Wheel Bleed Housing Grommet
    x
                

    Use these replacement rubber grommets to seal your Bleeder Housings in your wheels. These should be replaced at the start of every season.

    • Quality rubber construction
    • 1/2 Inch diameter
    • Sold each