Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Suspension At Speedway Motors

It seems so simple, right? Go fast and turn left. We know that wheeling a race winning sprint car is hard work and we're here to help you the whole way. We stock the biggest names in suspension like AFCO and Winters and have helped top racers like Swindell & Wolfgang find victory lane more than a few times.

Featured Products
Speedway 2-1/2 Inch Sprint Front Axle Kit, 50 Inch Long, Black
Speedway 2-1/2 Inch Sprint Front Axle Kit, 50 Inch Long, Black
x
            

These same quality Speedway front axle kits are now available in black.  They come with everything needed to assemble a complete Sprint car front end.

Kit contains:

  • M&W 2-1/2" O.D. 50" long black axle
  • Steel kingpins
  • Aluminum spindles with steel snouts
  • Aluminum steering arms
  • Winters direct mount hubs
  • LF brake bracket
  • LF aluminum brake rotor
  • Rotor bolts
  • LF two-piston caliper
  • Brake pads
  • Steel tie rod
  • Steel heims
  • Aluminum jam nuts
  • Grade 8 bolt and nut kit
Note: Assembly is required.
Carrera Coil-Over Springs, 2-1/2 I.D., 10 Inch
Garage Sale
Carrera Coil-Over Springs, 2-1/2 I.D., 10 Inch
x
            

Carrera coil-over racing springs are guaranteed to remain within 2% of rate and length - forever! Springs are coil wound of chrome-silicon wire, the strongest spring steel known. This gives more travel and lighter weight. Heat treated and chrome plated. 

Available in a variety of rates.

Carrera Spring Rate Chart (GIF)

Coil-Over Mounting Guide (GIF)

 

115 & 175 rates are clearance priced!

MPD 1-1/8 X 30 Inch Hollow Sprint Torsion Bar
MPD 1-1/8 X 30 Inch Hollow Sprint Torsion Bar
x
            30" MPD hollow torsion bars. 1-1/8" serrated. Available in diameters 0.925" to 1.065".
        
Bilstein SZ Series Custom Shock
Bilstein SZ Series Custom Shock
x
            

Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!

These Bilstein mono tube gas shocks feature digressive valving which delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps.

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel! 


Choose:

  1. Stroke - 7 or 9"
  2. Rebound Valving - 00-90
  3. Compression Valving - 00-90
  4. Gas Pressure - Low, Standard, or High

"Open Wheel, Suspension" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    x
                

    Great for spindles and other areas needing added clearance. It has a zinc coated steel body with a stainless steel ball in center. Constructed with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • M&W TS175 Aluminum Torsion Stop, 1-3/4 Inch Split
    M&W TS175 Aluminum Torsion Stop, 1-3/4 Inch Split
    x
                

    These aluminum torsion stops include the stop bolts, 1-3/4" split.

  • Steel Cone Spacers for Rod Ends, 1/2 Inch
    Steel Cone Spacers for Rod Ends, 1/2 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your  steering linkage or suspension. Includes 8 spacers per package.
            
  • Bird Cage Single Row Bearing, 0.79 x 4.33
    Bird Cage Single Row Bearing, 0.79 x 4.33
    x
                Our Sprint & Midget birdcage bearings are top quality for long life. These are single row bearings.
            
  • AFCO Aluminum Tube, 13 Inch Long, 1 Inch O.D. (3/4) Inch
    AFCO Aluminum Tube, 13 Inch Long, 1 Inch O.D. (3/4) Inch
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

    •  2-1/4” of tapped thread on each end. 

    Tech Tip:  Tube length will need to be 4" shorter than eye to eye working length.

  • Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    x
                Shock and spring protective cover by Outerwears for use with small body shocks with 1-7/8" I.D. spring. Coil over protectors available in red, blue or black in a 10" length. Sold in pairs.
            
  • Sprint Car King Pin Shims
    $6.99
    Sprint Car King Pin Shims
    x
                Sprint car kingpin shims, 8 per bag.
            
  • M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    x
                Torsional bearing kit fits between spindle and axle to eliminate binding.  One kit required per spindle. The ID is 0.885" and the total thickness of the bearing and 2 washers is 0.140" thick.
            
  • Zemco Torsion Bar Plastic Bushings
    Zemco Torsion Bar Plastic Bushings
    x
                

    Lightweight and durable, the blue Zemco plastic bushings are stepped and oversized to help eliminate bind and additional reaming. Select for .095" or .120" wall torsion tube.

    Sold each.

  • Eagle Motorsports Shock Spacer Sleeve
    Eagle Motorsports Shock Spacer Sleeve
    x
                Eagle Motorsports factory-built component. Aluminum spacer allows for full mobility of the front shock and works with any flat surface to provide 1" extra clearance.
    • Standoff for front shock tower
    • Allows full mobility of shock
    • Mates to any flat surface
    • Overall Lenght: .96"
    • Overall Diameter: 1.00"
    • Aluminum
    • Natural finish
    • Works perfect with Eagle aero shock towers (940-3762-SIDE)
  • Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    x
                Swedged 6061 aluminum steering, panhard and radius rods. 1" O.D., 5/8"  NF threads. LH threads on one end. RH threads on the other end.
            
  • M&W JLS-7 Lightened Aluminum Straps for Jacobs Ladder
    M&W JLS-7 Lightened Aluminum Straps for Jacobs Ladder
    x
                7" centerline to centerline.
            
  • Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    x
                

    U-joint bolt kit for sprint car driveshaft U-joints. These steel socket cap screws have hex drive heads and 7/16"-20 fine threads with a 1.00" length. Black oxide coated.

    Includes 4 bolts per bag.

  • FSR Sprint Direct Mount Toe Plates w/ Tape Measures
    FSR Sprint Direct Mount Toe Plates w/ Tape Measures
    x
                

    Here's the quickest and simplest way to measure toe-in on your race car. Bolt these plates onto you direct mount hubs and adjust your toe measurement with only one person. This includes 2 measurement plates and tape measures.

    • Quickest and simplest way to set the front end toe
    • Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
    • Oval shaped plates get the tape measure away from the brake rotor and steering components
    • Sold in pairs

    Note: This gives you a fast way to check/set front end toe.  It is affected by wheel or tire runout, so be certian wheels run true and tires have no bulges.

    *See "Notes" tab for simple step-by-step instructions. 

  • Longacre 79500 Toe Plates
    $56.99
    Product Rating: 4.75 Stars
    Longacre 79500 Toe Plates
    x
                

    Here's the quickest and simplest way to measure toe-in. Rest one of these plates against the tire on each side and use a tape measure.  Longacre toe plate comes with two tape measures. 

    • Quickest and simplest way to measure toe-in
    • Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
    • Formed design is rigid for accuracy and stays put against the tire
    • Dimensions: 23-1/2" x 9"

    475-7950 Instuctions (PDF)

  • Sprint Ford Style King Pin Bushing
    Sprint Ford Style King Pin Bushing
    x
                Ford-style Sprint Car spindle king pin bushings with a 0.859 inch diameter. 
            
  • Eagle Motorsports Sprint Car Steel Torsion Stop
    Eagle Motorsports Sprint Car Steel Torsion Stop
    x
                

    Eagle Motorsports factory-built component.

    • 1-3/4" tube split and .75" spline count. 
    • Steel construction
    • Includes pinch bolt
  • LPS Torsion Stop Adjustment Pinch Bolt
    LPS Torsion Stop Adjustment Pinch Bolt
    x
                

    This pinch bolt for is for our torsion stop (p/n: 490-14).  From LPS Racers, this adjustment torsion stop bolt is made of quality steel featuring a zinc finish. It comes complete with washers and securing nut.

    • Overall length: 2-1/2"
    • For torsion stop 490-14
    • Steel, zinc finish
  • Torsion Arm End 1 1/8 Inch Splined
    Torsion Arm End 1 1/8 Inch Splined
    x
                1-1/8" Splined torsion arm end.  
            
  • Front Direct Mount Hub Seal
    $8.99
    Front Direct Mount Hub Seal
    x
                Front direct mount hub seal.
            
  • Chalk Stix Maxx 1-1/8 x 30 Inch Sprint Torsion Bar
    Chalk Stix Maxx 1-1/8 x 30 Inch Sprint Torsion Bar
    x
                These bars are made of the highest quality material available and are heat-treated using the latest technology. 30" long with 1-1/8" serrations. 
            
  • RH and LH Carbon Fiber Radius Rod Cover
    $44.99
    $49.99
    RH and LH Carbon Fiber Radius Rod Cover
    x
                
    • Durable and lightweight carbon fiber construction
    • Easily removable, access cockpit and fuel system with ease
    • Choose side
    • Works with new Eagle Motorsports/Schnee Chassis cars
  • Ultra Lite Midget Hollow King Pin
    Ultra Lite Midget Hollow King Pin
    x
                

    King pins are made of steel with cap.

    • Each pin is .812" O.D
    • Light Weight
    • Strong, Durable.

     

     

  • Intercomp 102007 Turn Tables
    $699.99
    Product Rating: 5.00 Stars
    Intercomp 102007 Turn Tables
    x
                When you are setting your caster and camber you should use turn plates to correctly turn each wheel 20 degrees without scrubbing the tires. Heavy duty roller bearings make setup a snap.
            
  • Aero Spud Gussets, Front Axle Spud
    Aero Spud Gussets, Front Axle Spud
    x
                Formed and fit for bracing shock and wing spuds.
            
  • Speedway Midget Axle Assembly for Stealth/TCR Chassis
    Speedway Midget Axle Assembly for Stealth/TCR Chassis
    x
                You get everything shown, but you do the assembly. Speedway's 44" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit. 
            
  • AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    x
                

    Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

    AFCO Racing's quality and design help these replacement shock bearings stand up to the toughest standards and conditions, from daily commuting to full-on racing. These shock bearings are replacements for your AFCO Racing shocks. They are available for street rod, race, and coil-over applications.

    AFCO Shock End Drag Bearing, Comp Lined

    • 1/2 I.D. x 1.06 Inch Wide
    • standard bearing
    • Bearing housing is 1.06" o.d. and 1" wide.
    • Sleeve is .683" o.d. and .390" wide
  • Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    x
                

    The 3/4" hex with 1/2"-20 thread titanium half-heights are so light weight you have to try them; these are a Ti64 exclusive for Eagle Motorsports.  Fasten the shocks on your sprint and midget race car safely and securely with these quality hex nuts.

  • Bilstein 193103 Small Body Steel Coilover Kit
    Bilstein 193103 Small Body Steel Coilover Kit
    x
                A must-have if you are running the Bilstein small body steel shocks. For use with 1-7/8" springs.  
            
  • Steel Cone Spacers for Rod Ends, 5/8 Inch
    Steel Cone Spacers for Rod Ends, 5/8 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
            
  • Eagle Motorsports Chassis Repair Tool
    Eagle Motorsports Chassis Repair Tool
    x
                

    Eagle Motorsports factory-built component. This torsion mandrel tool is perfect for straightening bent tubes and spuds.

    • Works for 1-1/8" torsion bar tube size
    • Use for quick fixes at the track
    • Able to straighten spuds or tubes
    • Precision tuned high strenght steel

     

  • QA1 7888-109 Coil-Over Thrust Bearing Kit
    QA1 7888-109 Coil-Over Thrust Bearing Kit
    x
                

    This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

    • Includes two bearings and four washers
    • Kit services two coilovers
    • 2.512" I.D.
    • 3.233" O.D.
  • Swedged Tubes, Aluminum, Half Inch
    From: $11.99
    Product Rating: 5.00 Stars
    New
    Swedged Tubes, Aluminum, Half Inch
    x
                These 1/2" aluminum swedged tubes are compatible with 600 Racing Legends cars. Choose 6-1/2", 11", 12" or 23-1/2".
            
  • Axle Tie Down Strap With Sleeve - 24 Inch
    Axle Tie Down Strap With Sleeve - 24 Inch
    x
                These 24" wrap around axle straps have a protective sleeve and are great for secure trailering. Straps are sold each  and are available black, blue, purple, red or yellow. These tie downs rated at 10,000 lb. breaking strength and 3,333 lb. working load limit.  Measures 2" wide.
            
  • Eagle Motorsports Sprint Car Birdcage Flag
    Eagle Motorsports Sprint Car Birdcage Flag
    x
                

    These are Eagle Motorsports factory-built birdcage flags for 94037017 (w/bearings) and 94037018 (w/o bearings).

    • Wide design for use with multiple arm offsets
    • Aluminum construction

     

     

  • Bilstein LF10MMS Small Body Shock Bearing Ends
    Bilstein LF10MMS Small Body Shock Bearing Ends
    x
                

    Bearing ends for Bilstein small body shocks. Fits Bilstein only.

     

    • 10mm-1 thread.

     

  • Eagle Motorsports 5 Inch Aluminum Jacobs Ladder Straps
    Eagle Motorsports 5 Inch Aluminum Jacobs Ladder Straps
    x
                
    Eagle Motorsports offers these straps for your Jacobs Ladder. These jacob ladder straps are 5 inches from center to center and will work with all popular styles of micro sprint birdcages.
    • 5" center to center
    • Works with all popular styles of micro sprint birdcages
  • Winters Performance 1109-02A Aluminum King Pin Cap
    Winters Performance 1109-02A Aluminum King Pin Cap
    x
                
            
  • Garage Sale - Weld-On Spring Mount For 3-1/2 Inch I.D. Springs
    Garage Sale
    Garage Sale - Weld-On Spring Mount For 3-1/2 Inch I.D. Springs
    x
                

    This weld-on spring mount welds to anywhere you would like to put it. For 5" coil springs.

     

    Center O.D.:  3-1/2"

    Overall O.D.:  5"

    Hole I.D.:  .728"

    Spring Retainer Height:  1"

    Plate Thickness:  .200"

     

    These spring mounts are garage sale priced because they are new old stock.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Aluminum Torsion Arm, 1-1/8 x 18 Inch
    Aluminum Torsion Arm, 1-1/8 x 18 Inch
    x
                Straight torsion bar arms are 1" thick and available for 1-1/8" serrated bars, 18" long. Use as is, or bend to suit your needs.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25