Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

It seems so simple, right? Go fast and turn left. We know that wheeling a race winning sprint car is hard work and we're here to help you the whole way. We stock the biggest names in suspension like AFCO and Winters and have helped top racers like Swindell & Wolfgang find victory lane more than a few times.

Featured Products
Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
x
            Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

ASSEMBLY TIP:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Precision Rod Ends Chart Application (GIF)

Pro-1 Chromoly Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
Pro-1 Chromoly Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
x
            

These Pro-1 rod ends are general purpose, 2-piece, heavy duty rod ends. They feature a chromoly steel body and are black oxide coated to resist corrosion. Heat treated, precision ground ball without a race (metal to metal contact). Pro-1 ends will withstand a greater static load than our "Standard" or "Precision" rod ends.

Applications: Steering & suspension components on moderate to high horsepower applications.

Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Pro-1 Rod End Chart (GIF)

AFCO Yellow 2-5/8 I.D. Coil-Over Springs, 10 Inch
AFCO Yellow 2-5/8 I.D. Coil-Over Springs, 10 Inch
x
            

There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems, and in some cases, dangerous situations. When it comes to choosing coil springs there are many alternatives, but if you want the best you can get, the choice is clear: choose Afcoils. 

All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your length and rate. 

  • Machine-ground on both ends to tolerances within 1 degree
  • Pressed to solid height and "pre-set" - eliminates potential for additional set
  • Optimized material thickness and coil spacing
  • Made of super-high tensile strength chrome silicon wire for long life and and a consistent rate
  • All springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to be able to withstand even the most abusive conditions
  • To further enhance durability, Afcoils are shot-peened and coated with a durable yellow finish

Afcoil Spring Rate Guide (GIF)

Schroeder 1 Inch x 28 Inch Midget Hollow Torsion Bar
Schroeder 1 Inch x 28 Inch Midget Hollow Torsion Bar
x
            Made of proprietary high alloy steel, these bars are machined in one continuous pass and polished to assure no surface imperfections. This process assures the most consistent and responsive performance available. 1" bearing with 1" serration and coated for anti-corrosion.
        

"Open Wheel, Suspension" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    x
                

    Great for spindles and other areas needing added clearance. Stainless steel construction with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • M&W TS175 Aluminum Torsion Stop, 1-3/4 Inch Split
    M&W TS175 Aluminum Torsion Stop, 1-3/4 Inch Split
    x
                

    These aluminum torsion stops include the stop bolts, 1-3/4" split.

  • Steel Cone Spacers for Rod Ends, 1/2 Inch
    Steel Cone Spacers for Rod Ends, 1/2 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your  steering linkage or suspension. Includes 8 spacers per package.
            
  • Bird Cage Single Row Bearing, 0.79 x 4.33
    Bird Cage Single Row Bearing, 0.79 x 4.33
    x
                Our Sprint & Midget birdcage bearings are top quality for long life. These are single row bearings.
            
  • Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    x
                Shock and spring protective cover by Outerwears for use with small body shocks with 1-7/8" I.D. spring. Coil over protectors available in red, blue or black in a 10" length. Sold in pairs.
            
  • Sprint Car King Pin Shims
    $6.99
    Sprint Car King Pin Shims
    x
                Sprint car kingpin shims, 8 per bag.
            
  • M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    x
                Torsional bearing kit fits between spindle and axle to eliminate binding.  One kit required per spindle. The ID is 0.885" and the total thickness of the bearing and 2 washers is 0.140" thick.
            
  • Zemco Torsion Bar Plastic Bushings
    Zemco Torsion Bar Plastic Bushings
    x
                

    Lightweight and durable, the blue Zemco plastic bushings are stepped and oversized to help eliminate bind and additional reaming. Select for .095" or .120" wall torsion tube.

    Sold each.

  • Eagle Motorsports Shock Spacer Sleeve
    Eagle Motorsports Shock Spacer Sleeve
    x
                Eagle Motorsports factory-built component. Aluminum spacer allows for full mobility of the front shock and works with any flat surface to provide 1" extra clearance.
    • Standoff for front shock tower
    • Allows full mobility of shock
    • Mates to any flat surface
    • Overall Lenght: .96"
    • Overall Diameter: 1.00"
    • Aluminum
    • Natural finish
    • Works perfect with Eagle aero shock towers (940-3762-SIDE)
  • Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    x
                Swedged 6061 aluminum steering, panhard and radius rods. 1" O.D., 5/8"  NF threads. LH threads on one end. RH threads on the other end.
            
  • M&W JLS-7 Lightened Aluminum Straps for Jacobs Ladder
    M&W JLS-7 Lightened Aluminum Straps for Jacobs Ladder
    x
                7" centerline to centerline.
            
  • Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    x
                

    U-joint bolt kit for sprint car driveshaft U-joints. These steel socket cap screws have hex drive heads and 7/16"-20 fine threads with a 1.00" length. Black oxide coated.

    Includes 4 bolts per bag.

  • FSR Sprint Direct Mount Toe Plates w/ Tape Measures
    FSR Sprint Direct Mount Toe Plates w/ Tape Measures
    x
                

    Here's the quickest and simplest way to measure toe-in on your race car. Bolt these plates onto you direct mount hubs and adjust your toe measurement with only one person. This includes 2 measurement plates and tape measures.

    • Quickest and simplest way to set the front end toe
    • Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
    • Oval shaped plates get the tape measure away from the brake rotor and steering components
    • Sold in pairs

    Note: This gives you a fast way to check/set front end toe.  It is affected by wheel or tire runout, so be certian wheels run true and tires have no bulges.

    *See "Notes" tab for simple step-by-step instructions. 

  • Longacre 79500 Toe Plates
    $56.99
    Product Rating: 4.75 Stars
    Longacre 79500 Toe Plates
    x
                

    Here's the quickest and simplest way to measure toe-in. Rest one of these plates against the tire on each side and use a tape measure.  Longacre toe plate comes with two tape measures. 

    • Quickest and simplest way to measure toe-in
    • Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
    • Formed design is rigid for accuracy and stays put against the tire
    • Dimensions: 23-1/2" x 9"

    475-7950 Instuctions (PDF)

  • Sprint Ford Style King Pin Bushing
    Sprint Ford Style King Pin Bushing
    x
                Ford-style Sprint Car spindle king pin bushings with a 0.859 inch diameter. 
            
  • Eagle Motorsports Sprint Car Steel Torsion Stop
    Eagle Motorsports Sprint Car Steel Torsion Stop
    x
                

    Eagle Motorsports factory-built component.

    • 1-3/4" tube split and .75" spline count. 
    • Steel construction
    • Includes pinch bolt
  • LPS Torsion Stop Adjustment Pinch Bolt
    LPS Torsion Stop Adjustment Pinch Bolt
    x
                

    This pinch bolt for is for our torsion stop (p/n: 490-14).  From LPS Racers, this adjustment torsion stop bolt is made of quality steel featuring a zinc finish. It comes complete with washers and securing nut.

    • Overall length: 2-1/2"
    • For torsion stop 490-14
    • Steel, zinc finish
  • Torsion Arm End 1 1/8 Inch Splined
    Torsion Arm End 1 1/8 Inch Splined
    x
                1-1/8" Splined torsion arm end.  
            
  • Front Direct Mount Hub Seal
    $8.99
    Front Direct Mount Hub Seal
    x
                Front direct mount hub seal.
            
  • Chalk Stix Maxx 1-1/8 x 30 Inch Sprint Torsion Bar
    Chalk Stix Maxx 1-1/8 x 30 Inch Sprint Torsion Bar
    x
                These bars are made of the highest quality material available and are heat-treated using the latest technology. 30" long with 1-1/8" serrations. 
            
  • RH and LH Carbon Fiber Radius Rod Cover
    $44.99
    $49.99
    RH and LH Carbon Fiber Radius Rod Cover
    x
                
    • Durable and lightweight carbon fiber construction
    • Easily removable, access cockpit and fuel system with ease
    • Choose side
    • Works with new Eagle Motorsports/Schnee Chassis cars
  • Ultra Lite Midget Hollow King Pin
    Ultra Lite Midget Hollow King Pin
    x
                

    King pins are made of steel with cap.

    • Each pin is .812" O.D
    • Light Weight
    • Strong, Durable.

     

     

  • Intercomp 102007 Turn Tables
    $699.99
    Product Rating: 5.00 Stars
    Intercomp 102007 Turn Tables
    x
                When you are setting your caster and camber you should use turn plates to correctly turn each wheel 20 degrees without scrubbing the tires. Heavy duty roller bearings make setup a snap.
            
  • Aero Spud Gussets, Front Axle Spud
    Aero Spud Gussets, Front Axle Spud
    x
                Formed and fit for bracing shock and wing spuds.
            
  • Speedway Midget Axle Assembly for Stealth/TCR Chassis
    Speedway Midget Axle Assembly for Stealth/TCR Chassis
    x
                You get everything shown, but you do the assembly. Speedway's 44" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit. 
            
  • AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    x
                

    Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

    AFCO Racing's quality and design help these replacement shock bearings stand up to the toughest standards and conditions, from daily commuting to full-on racing. These shock bearings are replacements for your AFCO Racing shocks. They are available for street rod, race, and coil-over applications.

    AFCO Shock End Drag Bearing, Comp Lined

    • 1/2 I.D. x 1.06 Inch Wide
    • standard bearing
    • Bearing housing is 1.06" o.d. and 1" wide.
    • Sleeve is .683" o.d. and .390" wide
  • Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    x
                

    The 3/4" hex with 1/2"-20 thread titanium half-heights are so light weight you have to try them; these are a Ti64 exclusive for Eagle Motorsports.  Fasten the shocks on your sprint and midget race car safely and securely with these quality hex nuts.

  • Bilstein 193103 Small Body Steel Coilover Kit
    Bilstein 193103 Small Body Steel Coilover Kit
    x
                A must-have if you are running the Bilstein small body steel shocks. For use with 1-7/8" springs.  
            
  • Steel Cone Spacers for Rod Ends, 5/8 Inch
    Steel Cone Spacers for Rod Ends, 5/8 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
            
  • Eagle Motorsports Chassis Repair Tool
    Eagle Motorsports Chassis Repair Tool
    x
                

    Eagle Motorsports factory-built component. This torsion mandrel tool is perfect for straightening bent tubes and spuds.

    • Works for 1-1/8" torsion bar tube size
    • Use for quick fixes at the track
    • Able to straighten spuds or tubes
    • Precision tuned high strenght steel

     

  • QA1 7888-109 Coil-Over Thrust Bearing Kit
    QA1 7888-109 Coil-Over Thrust Bearing Kit
    x
                

    This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

    • Includes two bearings and four washers
    • Kit services two coilovers
    • 2.512" I.D.
    • 3.233" O.D.
  • Half Inch Aluminum Swedged Tubes
    Half Inch Aluminum Swedged Tubes
    x
                These 1/2" aluminum swedged tubes are compatible with 600 Racing Legends cars. Choose 6-1/2", 11", 12" or 23-1/2".
            
  • Garage Sale - Weld-On Spring Mount For 3-1/2 Inch I.D. Springs
    Garage Sale
    Garage Sale - Weld-On Spring Mount For 3-1/2 Inch I.D. Springs
    x
                

    This weld-on spring mount welds to anywhere you would like to put it. For 5" coil springs.

     

    Center O.D.:  3-1/2"

    Overall O.D.:  5"

    Hole I.D.:  .728"

    Spring Retainer Height:  1"

    Plate Thickness:  .200"

     

    These spring mounts are garage sale priced because they are new old stock.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Aluminum Torsion Arm, 1-1/8 x 18 Inch
    Aluminum Torsion Arm, 1-1/8 x 18 Inch
    x
                Straight torsion bar arms are 1" thick and available for 1-1/8" serrated bars, 18" long. Use as is, or bend to suit your needs.
            
  • Schroeder Mini Sprint Torsion Bars, 7/8 x 26 Inch, Hollow
    Schroeder Mini Sprint Torsion Bars, 7/8 x 26 Inch, Hollow
    x
                

    The only torsion bar that is machined in one continuous pass to assure quality. Then they are precision ground and heat treated to exact specifications. Bars stocked in 7/8" diameter. 26" long.

    Several bar rates available. 

  • M&W Sprint Axle, 8/12 Degree, Black, 2-1/2 x 52 Inch
    M&W Sprint Axle, 8/12 Degree, Black, 2-1/2 x 52 Inch
    x
                Hand crafted front axles are constructed of 2-1/2" diameter, .095"  wall 4130 chromoly steel for durability and longevity. Has an 8° left  /12° right kingpin inclination. 
    • Now available in black
    • 4130 chromoly construction
    • Direct replacement for all popular brand of chassis
    • Reamed for correct kingpin fit
    • .095 wall
    • 52 inch long
    • 8 degree kingpin inclination on the left and 12 degree on the right
    Front Axle Geometry (Link)

    Squaring the Front Axle (Link)
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25