Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Suspension At Speedway Motors

It seems so simple, right? Go fast and turn left. We know that wheeling a race winning sprint car is hard work and we're here to help you the whole way. We stock the biggest names in suspension like AFCO and Winters and have helped top racers like Swindell & Wolfgang find victory lane more than a few times.

Featured Products
Carrera Coil-Over Springs, 2-1/2 I.D., 10 Inch
Garage Sale
Carrera Coil-Over Springs, 2-1/2 I.D., 10 Inch
x
            

Carrera coil-over racing springs are guaranteed to remain within 2% of rate and length - forever! Springs are coil wound of chrome-silicon wire, the strongest spring steel known. This gives more travel and lighter weight. Heat treated and chrome plated. 

Available in a variety of rates.

Carrera Spring Rate Chart (GIF)

Coil-Over Mounting Guide (GIF)

 

115 & 175 rates are clearance priced!

MPD 1-1/8 X 30 Inch Hollow Sprint Torsion Bar
MPD 1-1/8 X 30 Inch Hollow Sprint Torsion Bar
x
            30" MPD hollow torsion bars. 1-1/8" serrated. Available in diameters 0.925" to 1.065".
        
Bilstein SZ Series Custom Shock
Bilstein SZ Series Custom Shock
x
            

Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!

These Bilstein mono tube gas shocks feature digressive valving which delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps.

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel! 


Choose:

  1. Stroke - 7 or 9"
  2. Rebound Valving - 00-90
  3. Compression Valving - 00-90
  4. Gas Pressure - Low, Standard, or High
Speedway 2-1/2 Inch Sprint Front Axle Kit, 50 Inch Long, Black
Speedway 2-1/2 Inch Sprint Front Axle Kit, 50 Inch Long, Black
x
            

These same quality Speedway front axle kits are now available in black.  They come with everything needed to assemble a complete Sprint car front end.

Kit contains:

  • M&W 2-1/2" O.D. 50" long black axle
  • Steel kingpins
  • Aluminum spindles with steel snouts
  • Aluminum steering arms
  • Winters direct mount hubs
  • LF brake bracket
  • LF aluminum brake rotor
  • Rotor bolts
  • LF two-piston caliper
  • Brake pads
  • Steel tie rod
  • Steel heims
  • Aluminum jam nuts
  • Grade 8 bolt and nut kit
Note: Assembly is required.

"Open Wheel, Suspension" Page 1 of 25

  • FK Rod Ends ALRSM8-6B Black Aluminum Jacobs Ladder Heim Joints, 5/8-18
    FK Rod Ends ALRSM8-6B Black Aluminum Jacobs Ladder Heim Joints, 5/8-18
    x
                Eliminate the need to add a spacer or drill your ladder.  This 3 piece extra strength heim threads into the birdcage and reduces to a 3/8" hole.                               
    • 3 piece extra strength rod end with heavy duty shank
    • Ball is made of 52100 steel, heat treated and hard chrome plated
    • Race is heat treated steel alloy, zinc plated and chromate treated
    • Body si 7075-T6 aluminum with hard black anodize finish
    • Works with 5/8"-18 thread size jam nuts
  • Afco 51 Series 4 Inch Quarter Midget Shock w/ Schrader Valve, 2.5 Inch
    Afco 51 Series 4 Inch Quarter Midget Shock w/ Schrader Valve, 2.5 Inch
    x
                Please view the product's page for more information
            
  • Henchcraft Chassis Mini Lightning Spring Front Spindle
    New
    Henchcraft Chassis Mini Lightning Spring Front Spindle
    x
                New from Henchcraft Chassis, these spindles  are   designed for   use  on Mini Lightning Sprint 1000cc chassis.  They   feature a lighter and  more durable design than traditional midget components with aircraft  all aluminum construction.
    • Choose left or right side
    • Lighter and more durable than traditional midget components
    • Aircraft aluminum
    • Stepped snout
    • For use on Henchraft Mini Lightning Sprint chassis
  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Sprint Axle Radius Rod Kit, Black
    Sprint Axle Radius Rod Kit, Black
    x
                

    These radius rod kits include everything you need to support the front axle and rear end on your Sprint car.  They come with three different length rods and quality black FK aluminum heims.

        Kit includes:

    • 5/8" NF thread, 1" O.D. black aluminum swedged tubes
    • 18.5", 23.5", 24" and 3 lengths of choice
    • Black FK aluminum heims
    • Plain aluminum jam nuts
  • QA1 5193 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 3/3
    QA1 5193 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 3/3
    x
                
    The best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
    • Racer Revalveable & Rebuildable
    • Can Be Run Upside Down
    • Length - 9"   

    Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.

    QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.

    Notes

    Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design allows

  • Stallard Micro Sprint 1 Inch Spindle Pinch Nut
    Stallard Micro Sprint 1 Inch Spindle Pinch Nut
    x
                These spindle pinch nuts come threaded for use with Micro sprint spindles.  They will work with all popular 1" spindles.
    • Spindle 1" pinch nut
    • used to hold front hubs on Micro's
  • Henchcraft Mini Lightning Sprint Jacobs Ladder W-Link Bolt Kit
    New
    Henchcraft Mini Lightning Sprint Jacobs Ladder W-Link Bolt Kit
    x
                

    New from Henchcraft Chassis, these jacobs ladder bolt kits are designed for use on Mini Lightning Sprint 1000cc chassis and include all hardware needed for a successful installation.

    • Jacobs ladder bolt kit only
    • 10-piece kit
    • Fastens jacobs ladder straps to paddle
    • Shoulder bolts offer smooth pivoting for straps
    • For use on Henchcraft Mini Lightning Sprint chassis

    Includes:

    • (2)  3/8" x 1" shoulder bolts
    • (4)  3/8" AN washers 
    • (2)  5/16" AN washers
    • (2)  5/16"-18 lock nuts
  • Speedway DSR Crate Engine A-Mod Shock Package
    Speedway DSR Crate Engine A-Mod Shock Package
    x
                Please view the product's page for more information
            
  • Henchcraft Mini Lightning Sprint Left Rear Birdcage Spacer
    New
    Henchcraft Mini Lightning Sprint Left Rear Birdcage Spacer
    x
                

    New from Henchcraft Chassis, these aluminum spacers are used on the LR birdcage to space the rear hairpin rod ends away from the birdcage.

    • Sized for proper component alignment
    • Spaces Left Rear birdcage hairpin rod ends
    • Aluminum construction
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Swindell Series by Eagle Motorsports 3 Hole Sprint Car Jacobs Ladder, 12.25 Inch
    Swindell Series by Eagle Motorsports 3 Hole Sprint Car Jacobs Ladder, 12.25 Inch
    x
                

    This jacobs ladder is the same style that Sammy Swindell uses on his Eagle Motorsports chassis. It is fabricated in the USA out of 3/4" round solid steel tube. It is adjustable in 1/2" increments. Asymmetrical design allows multiple adjusments. Straps (940-45011) and pins are not included. 

  • QA1 5195-3 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 5/3
    QA1 5195-3 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 5/3
    x
                
    The best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
    • Racer Revalveable & Rebuildable
    • Can Be Run Upside Down
    • Length - 9"   

    Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.

    QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.

    Notes

    Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design a

  • Micro Sprint Spindle Pinch Nut Bolts
    Micro Sprint Spindle Pinch Nut Bolts
    x
                

    These steel pinch nut bolts feature a black oxide finish and are perfect for securing your Micro Sprint spindle pinch nut. 

    • 1" long
    • Steel construction
    • Set of five bolts
  • CSI RS-X2 Gas Double Adjustable Shock, Eye Adjustable
    CSI RS-X2 Gas Double Adjustable Shock, Eye Adjustable
    x
                The all new RS-X2 double adjustable shock is light weight, compact and  effective.  It boast a wide tuning range and low minimum gas  pressure.  Both the rebound and compression adjusters  can be ran in the cock pit for the ultimate in tune ability.
    • CSI engineered this shock that has all of the features necessary to win at an affordable price
    • The all new RS-X2 double adjustable shock is light weight, compact and effective
    • It boasts a wide tuning range and low minimum gas pressure
    • Improved response over other shocks by eliminating the canister
    • Both the rebound and compression adjusters can be ran in the cock pit for the ultimate in tune ability
    • Other features include a billet optimum flow piston, low drag seals, tuned basevalve assembly, and CSI machined steel Gold coated shaft
    • Body: Threaded Aluminum 
    • Eyelet: Aluminum with premium spherical bearings
    • Choose from 5", 6", 7", or 8" stroke
  • Eagle Motorsports Sprint Car Adjustable Aero Shock Tower Pair
    Eagle Motorsports Sprint Car Adjustable Aero Shock Tower Pair
    x
                
    Eagle Motorsports factory-built component. 
    • Hand fabricated
    • Threaded spuds with aluminum spacers
    • Integrated wing strap spud
    • Sold in pairs
  • CSI Adjustable Midget Shocks, 4 Pack
    CSI Adjustable Midget Shocks, 4 Pack
    x
                

    CSI has done all the homework for you. They incorporate the most current valving combinations and packaged them together at a special price. Included in the package are midget shocks for average, slick and rough track conditions. The RS-12 Twin Tube adjustable shocks come standard in this package. 

    • 4 eye adjustable RS-12 twin tube shocks
    • Most current valving combinations
    • Included are shocks for average, slick and rough track conditions
    • threaded aluminum bodies

    This package is built specifically for midget racing and includes four (4) specifically valved shocks.

    Contact Speedway's Suspension Service Center to customize your own set. 

  • QA1 5173-5 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 3/5
    QA1 5173-5 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 3/5
    x
                Please view the product's page for more information
            
  • Henchcraft Chassis Mini Lightning Sprint W-Link Clevis
    New
    Henchcraft Chassis Mini Lightning Sprint W-Link Clevis
    x
                

    New from Henchcraft Chassis, this Henchcraft clevis captures the Jacobs ladder heim for hook up to birdcage. Clearance exists so chain adjustments will not bind the birdcage.

    • W-link clevis only
    • Aircraft grade aluminum construction
    • For use on Henchraft Mini Lightning Sprint chassis
  • CSI 7 Inch Twin Tube Eye Adjustable Shocks, Complete
    CSI 7 Inch Twin Tube Eye Adjustable Shocks, Complete
    x
                

     

    • Includes the new 2013 optimum flow piston
    • Upgrade to linear/digressive pistons and cockpit adjustable
    • Contact our Suspension Service Center to finish shocks to your exact specifications

     

  • FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • QA1 5176-4 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 6/4
    QA1 5176-4 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 6/4
    x
                Please view the product's page for more information
            
  • Speedway Bump Stop Dividers for 1/2 Inch Shaft
    Speedway Bump Stop Dividers for 1/2 Inch Shaft
    x
                These are a great tool for fine-tuning your bump  stop system. The  steeper the dish, the less progressive the bump stop  will be. Best  suited for use with multiple puck-style bump stops.
    • For shocks with 1/2" shaft diameters
    • Anodized aluminum
    • Available in 4 tapers:
      • 0 deg. - Black
      • 5 deg. - Blue
      • 10 deg. - Gold
      • 15 deg. - Red
  • QA1 5174 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 4/4
    QA1 5174 51 Series Steel Twin Tube 7 Inch Shock, Comp/Reb 4/4
    x
                Please view the product's page for more information
            
  • Henchcraft Chassis Mini Lightning Sprint Jacobs Ladder Assembly
    New
    Henchcraft Chassis Mini Lightning Sprint Jacobs Ladder Assembly
    x
                

    New from Henchcraft Chassis, these jacobs ladder assemblies are designed for use on Mini Lightning Sprint 1000cc chassis.  They feature aluminum construction with welded boss and a zero bind design for easy chain adjustments.

    • Aluminum construction with welded boss
    • Rod end mates to clevis in birdcage
    • Zero bind design allows for easy chain adjustments
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Afco 75 Series 1/2 Shaft Steel Monotube Bulb Shock, Base/Schrader Valve
    New
    Afco 75 Series 1/2 Shaft Steel Monotube Bulb Shock, Base/Schrader Valve
    x
                

    This new 75 Series steel mono-tube bulb shock from AFCO Racing Products are targeted at the open wheel modified racing market. This shock is designed to give you a better feel as well as an improved grip. Its robust sealing system is specifically designed to withstand high temperatures and heavy debris.

    • Smaller shaft for displacing less oil when compressed
    • Schrader valve allows racers to adjust gas pressure to suit various track conditions
    • Less rod pressure gain
    • Improved driver feel
  • Sawyer Chassis Micro Sprint Front Axle
    $164.99
    $174.99
    Sawyer Chassis Micro Sprint Front Axle
    x
                

    This Sawyer micro sprint torsion bar front axle is factory-built by Eagle Motorsports. 

    • 4130 steel construction
    • 42” total length
    • 8° Caster/Camber
    • Updated for 5/8” King Pins
    • Axle diameter: 1-3/4"
    • Axle wall thickness: .095"
    • Length: 40" center of king pin boss to center of king pin boss
    • Axle king pin bosses are reamed & honed for perfect fit; no need for additional reaming 
    • Boss: 1-3/4" in length
    • Left Front: 10 degree
    • Right Front: 10 degree
    • Threaded 3/8" stud panhard mount 
    • Threaded shock mounts
    • Fits Sawyer and other popular chassis brands
  • Eagle Motorsports Titanium Left Rear Shock Adjuster
    Eagle Motorsports Titanium Left Rear Shock Adjuster
    x
                

    Fine tune the height of your left rear shock with these adjuster shafts.  They are specially designed to fit Eagle sprint cars only. 

    • Left rear shock 
    • Used to adjust shock to desired height
    • For Eagle cars only
    • Titanium construction
  • FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • QA1 51991 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 9/1
    QA1 51991 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 9/1
    x
                
    The best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
    • Racer Revalveable & Rebuildable
    • Can Be Run Upside Down
    • Length - 9"   

    Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.

    QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.

    Notes

    Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design a

  • FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    New
    FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    x
                
    FK Rod Ends offers this three piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of aluminum and is hard anodized red. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Aluminum 3 piece LH 10-32 heim male
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is 7075-T6 aluminum, hard anodized red
    • Race is alloy steel, heat treated, zinc plated, chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Male Rod End Chart (JPG)

     

  • FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Speedway Plain Right Front Torsion Arm
    Speedway Plain Right Front Torsion Arm
    x
                
    These Sprint torsion arms feature a quality updated design with a clean anodized finish.  They are designed for use on right hand side.   
    • Iconic I-beam design
    • 2024 material
    • 1-1/8" spline
    • Includes pinch bolt
  • Stallard Chassis Micro Sprint Right Rear Offset Steel Torsion Arm
    Stallard Chassis Micro Sprint Right Rear Offset Steel Torsion Arm
    x
                

    These steel torsion arms for Stallard and Eagle chassis Micro Sprint cars feature a 4.25" offset with a 7/8" spline and fit the right rear side.

    • Quality steel construction
    • Less flex than aluminum arms for better fit
    • 4-1/4" offset
    • 7/8" spline
    • Right Rear
  • CSI CP20900 Cockpit Shock Adjuster Cable
    CSI CP20900 Cockpit Shock Adjuster Cable
    x
                
    These shock adjuster cables from Competition Suspensions are used with CSI or AFCO shocks to allow the driver to adjust the shock from the cockpit at any time.
    • Cable assembly only
    • Provides the driver with a positive feel for accurate adjustments
    • Works with all CSI adjustable shocks
  • Henchcraft Chassis Mini Lightning Sprint Birdcage Snap Ring
    New
    Henchcraft Chassis Mini Lightning Sprint Birdcage Snap Ring
    x
                

    New from Henchcraft Chassis, these birdcage snap rings are designed for use with Mini Lightning Sprint birdcages.  They are a Henchcraft birdcage spiral lock for retaining the bearing.

    • Birdcage snap ring only
    • For use on Henchraft Mini Lightning Sprint birdcages
  • FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 5/8 Inch Thread
    FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 5/8 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 1/2" hole x 5/8" shaft
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • QA1 53688-2 53 Series Stock Mount Steel Twin Tube Racing Shock
    QA1 53688-2 53 Series Stock Mount Steel Twin Tube Racing Shock
    x
                
    The 53 Series is the upgraded version of the FC Series and features a brand new body which is 100% made in-house and designed with enhanced internal gas bag clearance. Hands down, this is the best shock for stock mount applications. The 53 Series is the hot setup for Southern Sport Mods, Stock cars, and limited modifieds. Specific valvings available for Southern Sport Mods to promote weight transfer and increase traction.
    • For rear - GM full/mid-size
    • Compressed Length: 13.26"
    • Extended Length: 21.30"
    • Upper Mount: T-Bar
    • Lower Mount: Eyelet
    • Racer Revalveable & Rebuildable
    • Upgraded FC Series
    • Enhanced internal gas bag clearance
    • Perfect for stock mount applications
    • Twin Tube Design
    • 2" O.D. Steel Body

    QA1 53 Series Shock Chart (GIF)

  • DMI SRC1500 T-Rex Torsion Stop Retainer
    DMI SRC1500 T-Rex Torsion Stop Retainer
    x
                
    These new torsion stop retainers from Diversified Engineering feature easy-to-use styling, they are a threaded bolt that keeps the torsion stop attached to the torsion bar. Have peace of mind knowing you are safe with these quality retainers.
    • Red anodized aluminum
    • Installs and removes quickly and easily
    • Screws into the end of the DMI Reactor torsion bar
    • Safety item to stop the arm or torsion stop from falling off
  • FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Speedway Plain Left Front Torsion Arm
    Speedway Plain Left Front Torsion Arm
    x
                These Sprint torsion arms feature a quality updated design with a clean anodized finish.  They are designed for use on left hand side.  
    • Iconic I-beam design
    • 2024 material
    • 1-1/8" spline
    • Includes pinch bolt
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25