Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Oiling System

Shop Open Wheel Engine At Speedway Motors

Speedway Motors is the open wheel racing engine authority! Whether you have a 360, 410, USAC or Outlaw series Chevy race engine, Speedway has every part Sprint and Midget racers need. Our large assortment of cylinder heads, camshafts and racing valve train components allows you to tailor your engine for any racing condition. Speedway also has a variety of durable forged rotating assemblies, dry sump oiling systems and Dart engine blocks that can survive the rigors of open wheel racing. Race and win with Speedway Motors!

Featured Products
  • Weld or Bolt-On Fill Cap
    $14.99
    Product Rating: 4.79 Stars
    Weld or Bolt-On Fill Cap
    (Part #91011036)
    x
                

    Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.

    • 1-1/4" inside diameter
    • 1-1/4"-12 thread pitch

    Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included).  Bolt hole size is 1/8".

  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    (Part #5500015)
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Speedway Oil Filter Rock Guard, 6 Inch Long
    Speedway Oil Filter Rock Guard, 6 Inch Long
    (Part #91015166)
    x
                

    Protect your investment with this oil filter rock guard. The short 6" cover fits most standard 1 quart filters. Spun aluminum with clamp.

    Fits these filters:

    • AC Delco PF1218  (Speedway 910-15175)
    • K&N HP2002  (Speedway 465-070025)
    • K&N HP3002  (Speedway 465-070030) 
  • Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    (Part #91715120)
    x
                

    These claimer series oil pans are our best selling circle track pans. This low cost, high quality pan designed for the budget racer. Six quart capacity, 7-1/4" deep with two gates for oil flow control. Fits with stock or mini starter. Will not fit rear steer cars unless the engine has been moved back.

    917-15120 Instructions (PDF)

  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    (Part #577OP55HV)
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • KSE Racing Products KSD1023 Front Cam Mount Dry Sump Drive-1/2 In. Hex
    KSE Racing Products KSD1023 Front Cam Mount Dry Sump Drive-1/2 In. Hex
    (Part #91015555)
    x
                

    KSE cam mount 1/2" hex dry sump drive.

  • Champ Pan Pick-Up, 5-Bolt B/B Chevy Pump
    Champ Pan Pick-Up, 5-Bolt B/B Chevy Pump
    (Part #91015131)
    x
                3/4" Oil Pump Pickup for 5 bolt Big Block Chevy Pump.
  • Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    (Part #97010073)
    x
                

    This oil drain tube from Henchcraft Chassis is for your Kawasaki Zx10 engine. The aluminum tube is cut to proper length for an easy install.

    • Install when using billet oil pan (97010064)
    • Aluminum Material
    • Natural Finish
    • Henchcraft Lightning Sprint Chassis
    • Sold Individually


Filter

"Open Wheel, Oiling System" Page 1 of 6

Page 1 of 6

  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    (Part #5500015)
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    Henchcraft Chassis Oil Drain Tube for Kawasaki Zx10 Engine
    (Part #97010073)
    x
                

    This oil drain tube from Henchcraft Chassis is for your Kawasaki Zx10 engine. The aluminum tube is cut to proper length for an easy install.

    • Install when using billet oil pan (97010064)
    • Aluminum Material
    • Natural Finish
    • Henchcraft Lightning Sprint Chassis
    • Sold Individually


  • King Racing Products 2176 Oil Pressure Gauge Fitting Only, -4 AN
    King Racing Products 2176 Oil Pressure Gauge Fitting Only, -4 AN
    (Part #9402176)
    x
                

    -4 AN oil pressure fitting.

  • Speedway Oil Filter Rock Guard, 6 Inch Long
    Speedway Oil Filter Rock Guard, 6 Inch Long
    (Part #91015166)
    x
                

    Protect your investment with this oil filter rock guard. The short 6" cover fits most standard 1 quart filters. Spun aluminum with clamp.

    Fits these filters:

    • AC Delco PF1218  (Speedway 910-15175)
    • K&N HP2002  (Speedway 465-070025)
    • K&N HP3002  (Speedway 465-070030) 
  • Champ Pans CP100LTRB GM 604 Crate Engine Oil Pan 1986-Up, 1-Piece Main
    Champ Pans CP100LTRB GM 604 Crate Engine Oil Pan 1986-Up, 1-Piece Main
    (Part #91015117)
    x
                

    This steel pan is designed around the Camaro front stub with the engine set back. It has six trapdoors, three crank scrapers, two runners, an oil temp fitting, an oil check level plug, and a removable horsepower saving louvered windage tray. Oil capacity of 8 qts. with filter.  These racing oil pans are approved replacements for GM 604 crate engines.

    • 7” deep x 14” wide x 12” long
    • Stock or mini-starter
    • Fits 1986-up engines, GM 604 crate
  • Small Block Chevy Stock Volume Oil Pump
    Small Block Chevy Stock Volume Oil Pump
    (Part #577OP55)
    x
                Stock volume oil pump for S/B Chevy. Pump is preset to 55-65 psi and uses a 5/8" diameter pick-up tube.
            
  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    (Part #101RPS1)
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • Spike Chassis 2048 Esslinger Oil Tank
    Spike Chassis 2048 Esslinger Oil Tank
    (Part #9502048)
    x
                Under hood dry sump tank with internal swirl pot for fluid control.  Custom built for Esslinger engines with a single AN 16 outlet and AN 12 inlet and breather.  22" tall and 6" in diameter. 
            
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    (Part #577OP55HV)
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Straight Oil Pressure Gauge Extended Fitting, 1/8 Inch NPT to AN4
    Straight Oil Pressure Gauge Extended Fitting, 1/8 Inch NPT to AN4
    (Part #6174070)
    x
                

    We all know how hard it is to get at that oil pressure fitting on the back of the block. Oil gauge extension is 1/8" NPT to AN4. 

    • 1/8" NPT to nut is 1.32"
    • Nut thickness is .25"
    • AN4 to nut is .75"
  • Peterson Fluid Systems 05-0740 Aluminum Mandrel Spacer, 1/4 Inch
    Peterson Fluid Systems 05-0740 Aluminum Mandrel Spacer, 1/4 Inch
    (Part #91615926)
    x
                Mandrel spacer to properly space and align the mandrel pulley pack.
            
  • Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    (Part #57710550)
    x
                

    Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required.

    • Steel billet gears with drive gear pinned to shaft
    • CNC machined housing and cover plate
    • Coated for wear and corrosion resistance
    • 5/8" inlet

    Available in standard volume or high-volume, which has 25% more volume.

  • Small Block Chevy Main Cap Baffle
    Small Block Chevy Main Cap Baffle
    (Part #54523000)
    x
                Keeps sump oil from reaching crankshaft. Mounts between pump and main cap. Requires trimming. 
            
  • Small Block Chevy Oil Pan Stud Kit
    Small Block Chevy Oil Pan Stud Kit
    (Part #5506315)
    x
                The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
            
  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    (Part #577700)
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    (Part #1011347901)
    x
                

    These oil pump drive shaft kits from ARP are designed for use with heavy duty oil pumps for small block Chevy engines.

    • Black oxide finish
    • HD oil pumps
    • Small Block Chevy
    • Made in the U.S.A
  • Deluxe Hi-Volume Small Block Chevy Oil Pump
    Deluxe Hi-Volume Small Block Chevy Oil Pump
    (Part #577OP55HVD)
    x
                

    This oil pump has all it's components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpm's which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

    For Small Block Chevy V-8. Use 5/8" pick-up tube.

  • Oil Drip Pan for Quick Change Units
    Oil Drip Pan for Quick Change Units
    (Part #91081009)
    x
                

    All aluminum construction. Easily pours hot oil with built-in corner spout. Comfortable, ergonomic handle. Max capacity is 6 quarts.

    • All aluminum construction
    • Easty to pour hot oil with built in corner spout
    • Comfortable, ergonomic handle

     

  • Small Block Chevy Windage Tray, Plain Steel
    Small Block Chevy Windage Tray, Plain Steel
    (Part #91015100)
    x
                

    Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install. Fits 2 or 4 bolt main blocks.

  • Champ Pans CP100RB 1986-Up Small Block Chevy Oil Pan, 1-Piece Main
    Champ Pans CP100RB 1986-Up Small Block Chevy Oil Pan, 1-Piece Main
    (Part #91015108)
    x
                

    Champ-style pan for 1986-Up small block Chevy. This pan is designed around the Camaro front stub with engine set back. Measures 7" deep with 6 trap doors, 2 runners, 3 crank scrapers, and a 8 quart capacity (including filter). Stock starter will fit.

    Measures 7" deep x 14" wide x 12" long.

Goto Previous PagePrevious Page
1 2 3 4 5 6