Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Mini Sprint At Speedway Motors

Mini Sprints are the perfect combo of sprint cars and midget cars. The shape of a sprint with the size of midget car. Speedway carries all the chains, sprockets and chassis components you need to reach the checkered flag first. And with the best prices around, you'll never have to look anywhere else.

"Open Wheel, Mini Sprint" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    x
                

    Great for spindles and other areas needing added clearance. It has a zinc coated steel body with a stainless steel ball in center. Constructed with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
  • Tru-Lite Titanium Bolts, 5/16-18 Coarse Thread, 1/2 Inch Long, 1/2 Inch Hex Head
    Tru-Lite Titanium Bolts, 5/16-18 Coarse Thread, 1/2 Inch Long, 1/2 Inch Hex Head
    x
                

    These coarse thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-18 x 1/2"
    • 1/2" Hex Head
    • Application: steering wheel bolt
  • Stallard Chassis BC250-550 Splined Axle Spacer, 3/4 Inch
    Stallard Chassis BC250-550 Splined Axle Spacer, 3/4 Inch
    x
                This 27-spline aluminum axle spacer has a 3/4 inch width.
            
  • Brake Line Guard
    $9.99
    $12.99
    Brake Line Guard
    x
                This brake line guard for the Dynalite Single brake caliper is designed to mount off one of the two caliper mounting bolts. With this guard in place, it will help prevent a leaking or broken line from those unfriendly big chunks of mud or rocks.
            
  • M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    x
                Torsional bearing kit fits between spindle and axle to eliminate binding.  One kit required per spindle. The ID is 0.885" and the total thickness of the bearing and 2 washers is 0.140" thick.
            
  • Micro/Mini Sprint Suzuki Intake Adapters
    $229.99
    $249.99
    Micro/Mini Sprint Suzuki Intake Adapters
    x
                

    Convert your fuel injected Suzuki engine to carburetors in minutes by using these flowed adapters.  Accepts stock o-rings.

    • Converts fuel injected Suzuki engine to carburetors
    • Installation kit includes 4 boots and 8 clamps
  • Pro-Blend 1720 Anti-Seize Compound
    Pro-Blend 1720 Anti-Seize Compound
    x
                

    Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

    • Defies contact of dissimilar or like metals
    • Not affected by heat, moisture, salt water, or corrosion

    Learn why using anti-seize is so important in our tech article, Installing New Hardware.

  • K&N Filters 99-0516 Air Filter Oil, Aerosol
    K&N Filters 99-0516 Air Filter Oil, Aerosol
    x
                

    K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

    NOTE: Aerosol items cannot be shipped by air.

  • Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    x
                

    These replacement front covers are perfect for your fuel cell with a 7" x 12" opening.  They are designed to fit the front side of the tank for your Sprint car and feature quality aluminum construction.

    • Replacement cover
    • Fits front of fuel cell
    • 7" x 12"
    • Aluminum
  • Pump Frame Tube Clamp for 1-1/4 Inch Tube
    Pump Frame Tube Clamp for 1-1/4 Inch Tube
    x
                

    Pump Frame Tube Clamp for 1.250" Tube for FUELAB Prodigy pump.

  • Wing Clips
    $4.99
    Wing Clips
    x
                

    Allows quick wing tree adjustments with no wrenches. 

     

    • Durable
    • Lightweight
    • Fast & Easy Adjustments 

     

  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • Double Bearing Sleeve
    $12.99
    Double Bearing Sleeve
    x
                These aluminum rear axle bearing sleeves are for 27-spline axles on Mini and Micro Sprint Car axles only. 
            
  • Aluminum Midget 31-Spline Axle Nut
    Aluminum Midget 31-Spline Axle Nut
    x
                Aluminum midget axle nuts.  Measures 2-1/4" O.D. Choose right hand or left hand.
            
  • Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    x
                

    Hood Saver is the world's finest transparent protective tape. This multi-purpose, waterproof super clear tape protects painted body parts and chrome from rock chips, tar and bugs. Hood Saver tape is easy to apply and remove. Provides an invisible protective film that is safe for all painted surfaces.

    Comes in a 12 ft long roll that is 5" wide.

  • Braided Stainless AN 18 Inch Brake Line
    Braided Stainless AN 18 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Yamaha R6 Water Pump Housing, 1999-2010 S Model, Cage Mount Radiator
    Yamaha R6 Water Pump Housing, 1999-2010 S Model, Cage Mount Radiator
    x
                Eliminate fittings, increase flow, and clean up those tight spaces with a billet aluminum housing. Machined to orientate inlets in the direction of the radiator. Accepts an -12 AN and 1/8" NPT fitting.
            
  • Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    x
                

    These Stallard collars are designed to be used as a throttle rod stop or rod adapter. They have a black oxide finish and feature a set screw to secure it.

    Stallard Mico Sprint Throttle Cable Adapter

    • 1/4" I.D.
    • .68" O.D.
    • Steel
    • Black oxide
    • Throttle Cable throttle rod adapter
    • Fits Stallard cars only

  • Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    x
                

    These red shrink tubes work perfect for sealing battery terminal connections.  They protect battery to cable connections by creating a water tight seal. 

    • Ideal for use on battery cable connections or spark plug wires
    • 4 sleeves in a kit at 4 inches long each
  • Speedway Disc Brake Residual Valve, 2 PSI, Purple
    Speedway Disc Brake Residual Valve, 2 PSI, Purple
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A residual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

    Our residual pressure valve features a distinctive purple anodized finish with 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only.

  • Plastic AN Cap and Plug Kit - 72 Pieces
    Plastic AN Cap and Plug Kit - 72 Pieces
    x
                

    If you don't have one of these kits, get one now. Includes six each cap and plug for AN 3, AN 4, AN 6, AN 8, AN 10 and AN 12.

  • Chain Guide Block
    $28.99
    Product Rating: 5.00 Stars
    Chain Guide Block
    x
                Durable plastic block mounts your birdcage or bearing carrier to provide a low resistance guide for any chain.   
            
  • Cometic EC939032AFM 2003-2005 Yamaha R6 Clutch Cover Gasket
    Cometic EC939032AFM 2003-2005 Yamaha R6 Clutch Cover Gasket
    x
                

    AFM is the ideal gasket material for machined surfaces, especially when used between two uneven stamped surfaces that have been plated. AFM is a chemically blown, compounded Nitrile synthetic rubber bonded to an aluminum core with temperature resistance of over 250°F. AFM material has an 85% recovery while maintaining a strong torque retention.

    • No gasket sealers or silicone bead required.
    • Re-torque is NOT required.
    • .032" Thick
  • Wilwood 130-2655 Forged Dynalite O-Ring Seal Kit, 1.75 Inch
    Wilwood 130-2655 Forged Dynalite O-Ring Seal Kit, 1.75 Inch
    x
                

    Replacement parts for Wilwood Forged Dynalite calipers.

  • DPDT Momentary Toggle Switch
    $14.99
    DPDT Momentary Toggle Switch
    x
                

    Universal heavy duty 3-position momentary toggle switch. Features a nickel-plated brass switch, phenolic housing, and plated steel cap. Rated at 25A at 12V, 15A at 24V, and 10A at 36V DC.

    • Mounting Stem:  15/32" -32 thread, 15/32" long, and fits panels up to 9/32"
    • Six Screw Terminals:  6-32 screws
    • Electrical Rating:  25A at 12V, 15A at 24V, and 10A at 36V DC

    Works great as a linear actuator switch!

    Note: Up=Momentary On, Center=Off, Down=Momentary On.

  • Yamaha Intake Adapters, 2003-2010 S Model, 4 Per Kit
    Yamaha Intake Adapters, 2003-2010 S Model, 4 Per Kit
    x
                Convert your fuel injected Yamaha engine to carburetors in minutes by using these flowed adapters.  Installation kit is complete with 4 boots and 8 clamps.  Accepts stock o-rings.
            
  • Speedway Filter Boot Clamp
    $2.99
    $3.99
    Speedway Filter Boot Clamp
    x
                

    Boot clamp for Speedway Molded Air Box.

  • Double Throw Toggle Switch with Boot
    Double Throw Toggle Switch with Boot
    x
                

    Single pole, double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.

    • Three terminals
    • Two toggle positions
    • Rated for 25 amps at 12 volts DC

     

  • Ultra Lite Midget Hollow King Pin
    Ultra Lite Midget Hollow King Pin
    x
                

    King pins are made of steel with cap.

    • Each pin is .812" O.D
    • Light Weight
    • Strong, Durable.

     

     

  • Fuel Pump/Fuel Filter Housing Tube Clamp
    Fuel Pump/Fuel Filter Housing Tube Clamp
    x
                
    • Holds any 2.075" diameter pump or a 2" diameter fuel filter housing securely to frame
    • Clamps to 1.25" and 1.375" tubing sizes
    • Perfect for Carter or Walbro style pumps and 2" diameter fuel filters
    • Billet aluminum construction
  • Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    x
                

    Save weight and lighten your rotating mass with these full thread 5/16"-18 coarse thread x 1.25" long titanium bolts for beadlock wheel rings. Titanium has the highest strenth-to-weight ratio of any metal. This hex head titanium bolt is made from 6AL/4V material, which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-18 x 1-1/4"
    • 1/2" Hex Head
    • Full Thread
    • Application: bead lock 

     

  • R2C Performance R2C0210A6 14.5 Inch Outerwear Oval Prefilter Cover
    R2C Performance R2C0210A6 14.5 Inch Outerwear Oval Prefilter Cover
    x
                

    Make the longest lasting filter on the market last even longer!  R2C Performance prefilters not only add life to your filters, but they also ensure ample flow to your engine.  And the more fresh air that your engine ingests, the more power that it can produce.  R2C prefilters are made from durable polyester to grab those larger particles and protect your air filter from the elements without impeding flow.  Feed your engine the cleanest air possible and protect your air filters with R2C prefilters.

    Outerwear Prefilter Cover

    • Excellent first line of defense
    • Elastic bands hold secure to filter element
    • Slip fit over molded air box for additional protection
    • Easily Washable
    • Black polyester

    NOTE:  Prefilter only!  Filter is not included.

  • Stallard Chassis BC250-540 Sprocket Carrier and Rotor Hub
    Stallard Chassis BC250-540 Sprocket Carrier and Rotor Hub
    x
                
    • Fits any 1.75” x 27 spline rear axle
    • Use the same hub for drive sprocket or brake rotor
    • 5.25” bolt circle with six threaded ¼ x 20 mounting holes
  • 4 PC Mini-Sprint Splined Spacer Kit
    4 PC Mini-Sprint Splined Spacer Kit
    x
                Four 30° tapered axle spacers for 27 spline axles. Lengths include: 2 – 3/4”, 1 – 1”, and 1 – 2”. 
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25