Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Tires & Wheels At Speedway Motors

Speedway Motors is your headquarters for Sprint and Midget racing wheels! We stock all the best beadlock wheels from the top manufacturers, as well as mud covers to fit them all. Find your 10-inch Mini Sprint wheels and more in our huge selection of parts. Check out our great selection of tire treatments, pressure gauges, grooving irons, tire sipers and bleed-offs, too!

"Open Wheel, Mini Sprint" Page 1 of 3

  • Weld Magnum 27 Spline 10 x 12 In Wheel, Beadlock and Cover, 4In Offset
    Weld Magnum 27 Spline 10 x 12 In Wheel, Beadlock and Cover, 4In Offset
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    Weld Racing P851-1050 Mini Sprint Wheel Half, Non-Beadlock, 10x5 Inch
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    x
                

    These quality O-rings from Stallard Chassis are designed for use with our dust cover for 2.020" diameter hubs.

    • Seals out dirt and dust from entering hub bearings
    • Durable rubber material construction
    • For use with 2.020" diameter front hubs
  • Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Weld Direct Mount 10 x 8 In Front Wheel - Outer Beadlock, 4 In Offset
    Weld Direct Mount 10 x 8 In Front Wheel - Outer Beadlock, 4 In Offset
    x
                

    Direct mount mini sprint front wheels with outer beadlock and no cover. 

    10" Weld Direct Mount Front Application Chart (GIF)

  • Weld Magnum 27 Spline 10 x 10 In Wheel, Beadlock and Cover, 4In Offset
    Weld Magnum 27 Spline 10 x 10 In Wheel, Beadlock and Cover, 4In Offset
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Sander Engineering 0-3 Wheel Inner Half, 10 x 3 Inch, Non Beadlock
    Sander Engineering 0-3 Wheel Inner Half, 10 x 3 Inch, Non Beadlock
    x
                No beadlock, no ring or cover.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

  • Sander Engineering 0-4L Outer Wheel Half, Beadlock, 10 x 4 Inch
    Sander Engineering 0-4L Outer Wheel Half, Beadlock, 10 x 4 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Outer Beadlock
    x
                

    Speedway is now stocking Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Direct Mount Front Wheel Chart Application (GIF)

  • Mini Sprint Axle Nut for Splined Axle
    Mini Sprint Axle Nut for Splined Axle
    x
                These have a 2" hex and your choice of LH or RH thread for Mini Sprint Axles only. 
            
  • Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 13, 4 In Offset
    Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 13, 4 In Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 10, 4 In Offset
    Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 10, 4 In Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Sander Engineering 0-6L Outer Wheel Half, Beadlock, 10 x 6 Inch
    Sander Engineering 0-6L Outer Wheel Half, Beadlock, 10 x 6 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Weld Magnum 27 Spline 10 x 13 In Wheel, Beadlock and Cover, 4In Offset
    Weld Magnum 27 Spline 10 x 13 In Wheel, Beadlock and Cover, 4In Offset
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Weld Racing P650-5309 10 Inch Beadlock Rim Ring with Flange
    Weld Racing P650-5309 10 Inch Beadlock Rim Ring with Flange
    x
                

    These Weld Racing beadlock rings are designed to keep your tires from moving on your drag racing wheels. They are available with a flange and feature a bolted design for maximum durability. 

    Weld 10", 10-hole bolt-on bead lock ring for quarter turn fastener-on ring cover (cover not included).

    Weld Racing Beadlock Rim Ring with Flange

    • 10 Inch 
  • Sander 27-Spline Wheel, Outer Beadlock, No Cover, 10 x 8, 3 In Offset
    Sander 27-Spline Wheel, Outer Beadlock, No Cover, 10 x 8, 3 In Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Sander Direct Mount Front Wheel, 10x6, 2 Inch Offset, Non-Beadlock
    Sander Direct Mount Front Wheel, 10x6, 2 Inch Offset, Non-Beadlock
    x
                

    Sander Engineering Inc. is the only racing wheel company to CNC cold spin all aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life.

    • Splined mini sprint car wheel
    • 12 on 6-3/4" bolt circle
    • .249" diameter thru for 1/4" bolts

    Direct Mount Front Wheel Chart (GIF)

  • Weld Racing P851-1020 Mini Sprint Wheel Half, Non-Beadlock, 10x2 Inch
    Weld Racing P851-1020 Mini Sprint Wheel Half, Non-Beadlock, 10x2 Inch
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Weld Mini Sprint Magnum 10 Inch Wheel Half, Beadlock, 10x7
    Weld Mini Sprint Magnum 10 Inch Wheel Half, Beadlock, 10x7
    x
                

    Replacement parts for Weld 10" Mini Sprint wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold with beadlock.

    Application Chart (GIF)

  • Weld Racing Direct Mount 10 x 6 Front Wheel - Non Beadlock, 3In Offset
    Weld Racing Direct Mount 10 x 6 Front Wheel - Non Beadlock, 3In Offset
    x
                

    Direct mount mini sprint front wheels with no beadlocks. 

  • Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Non-Beadlock
    Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Non-Beadlock
    x
                

    Sander Engineering Inc. is the only racing wheel company to CNC cold spin all aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks and long life.

    • Splined mini sprint car wheel
    • 12 on 6-3/4" bolt circle
    • .249" diameter thru for 1/4" bolts

    Direct Mount Front Wheel Chart (GIF)

  • Sander Engineering 10-021 10 Inch Beadlock Ring with Cover
    Sander Engineering 10-021 10 Inch Beadlock Ring with Cover
    x
                This Sander Number 2 lock ring is the lightest and strongest one made. Anodized red for long life. Includes mud cover.
            
  • Weld Mini Sprint Magnum 10 Inch Wheel Half, Beadlock, 10x9
    Weld Mini Sprint Magnum 10 Inch Wheel Half, Beadlock, 10x9
    x
                

    Replacement parts for Weld 10" Mini Sprint wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold with beadlock.

    Application Chart (GIF)

  • Sander Engineering 0-2.25L Outer Wheel Half, Beadlock, 10 x 2-1/4 Inch
    Sander Engineering 0-2.25L Outer Wheel Half, Beadlock, 10 x 2-1/4 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • 10 Inch Micro Sprint Inner Wheel Cover
    10 Inch Micro Sprint Inner Wheel Cover
    x
                
    • Keeps mud from filling inside of rear wheels
    • Prevents loading the engine with extra pounds
    • Made to fit onto axle and is incorporated as a spacer
  • Sander Direct Mount 10x8 Front Wheel, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount 10x8 Front Wheel, 3 Inch Offset, Outer Beadlock
    x
                

    Speedway is now stocking Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Direct Mount Front Wheel Chart Application (GIF)

  • Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 8, 3 Inch Offset
    Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 8, 3 Inch Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Weld 27 Spline 10 x 10 In Wheel, Outer Beadlock, No Cover, 4 In Offset
    Weld 27 Spline 10 x 10 In Wheel, Outer Beadlock, No Cover, 4 In Offset
    x
                

    Weld Magnum splined Mini Sprint Car wheels. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    27 Spline Wheel Application Chart (GIF)

  • Sander Engineering 0-6 Wheel Inner Half, 10 x 6 Inch, Non Beadlock
    Sander Engineering 0-6 Wheel Inner Half, 10 x 6 Inch, Non Beadlock
    x
                No beadlock, no ring or cover.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

  • Weld Racing P851-1040 Mini Sprint 10 Inch Wheel Half-No Beadlock-10x4
    Weld Racing P851-1040 Mini Sprint 10 Inch Wheel Half-No Beadlock-10x4
    x
                Replacement wheel parts for 10" Weld Mini Sprint Wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold without beadlock.
            
  • Weld Mini Sprint Magnum Wheel Half, Beadlock, 10 x 3 Inch
    Weld Mini Sprint Magnum Wheel Half, Beadlock, 10 x 3 Inch
    x
                

    Replacement parts for Weld 10" Mini Sprint wheels. Replace only the damaged parts and save money compared to replacing the complete wheel. Mini sprint wheel halves come fully polished but no valve stem holes have been drilled. Sold with beadlock.

    Application Chart (GIF)

  • Stallard Chassis Forged 27 Spline 10 Inch Rear Wheel Center, Black
    Stallard Chassis Forged 27 Spline 10 Inch Rear Wheel Center, Black
    x
                
    These Micro/Mini Sprint racing wheel centers feature a 27 splined hub in an anodized black finish.  They are constructed of 6061 aircraft aluminum for extra strength. 
    • Fits any 1.75” x 27 spline rear axle
    • Superior strength 6061 aircraft aluminum
    • Twelve ¼” holes on a 6 ¾” bolt circle
     
     
Goto Previous PagePrevious Page
1 2 3