Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 7

Products

Gaskets and Seals

Shop Open Wheel Engine At Speedway Motors

Speedway Motors is the open wheel racing engine authority! Whether you have a 360, 410, USAC or Outlaw series Chevy race engine, Speedway has every part Sprint and Midget racers need. Our large assortment of cylinder heads, camshafts and racing valve train components allows you to tailor your engine for any racing condition. Speedway also has a variety of durable forged rotating assemblies, dry sump oiling systems and Dart engine blocks that can survive the rigors of open wheel racing. Race and win with Speedway Motors!

Featured Products
  • Henchcraft Mini Lightning Sprint O-Ring for AN Oil Line Fitting
    Henchcraft Mini Lightning Sprint O-Ring for AN Oil Line Fitting
    (Part #97010071)
    x
                

    New from Henchcraft Chassis, these oil fitting o-rings are designed for use with Mini Lightning Sprint GSXR engines.

    • O-ring for oil pressure fitting
    • GSXR engines
  • GSXR 600 Micro / Mini Sprint Crank Case Cover
    GSXR 600 Micro / Mini Sprint Crank Case Cover
    (Part #9609905)
    x
                These Micro Sprint crank case covers are designed to work with 2006-2012 Suzuki GSXR 600 and 750 engines. They feature durable billet aluminum construction with an anodized black finish.
    • Fits Suzuki GSXR 600 or 750 engines, 2006 to 2012
    • Direct replacement for factory crank case cover
    • Designed specifically for the rigors of micro sprint racing
    • Billet aluminum construction, anodized finish
  • Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    (Part #9152350)
    x
                Speedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Fel-Pro 1142-026 PermaTorque Multi-Layer Steel Head Gasket, Small Block Chevy
    New
    Fel-Pro 1142-026 PermaTorque Multi-Layer Steel Head Gasket, Small Block Chevy
    (Part #3441142026)
    x
                

    Fel-Pro Performance head gaskets are proven to handle big power and are designed to maintain contact pressure between the cylinder head and block during engine operation.  Manufactured to work great with both cast iron and aluminum heads, pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets.

    • Works for 265-350 Small Block Chevy
    • Gaskets are sold each
    • Multi-layer
    • 4.100" gasket bore
    • Nominal compression thickness: .026"
    • Compressed volume: 5.7 cc
    • Not for use with small block 400.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (Part #3441003)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Ford C-4 Automatic Transmission Oil Pan Gasket
    Ford C-4 Automatic Transmission Oil Pan Gasket
    (Part #91010229)
    x
                This oil pan gasket is made to work with your Ford C-4 automatic transmission. It is .07" thick and made of rubber impregnated cork. 
    • .07" thick rubber impregnated cork gasket
    • Sold individually
    • Ford C-4 transmission
  • Speedway 1955-76 Small Block Chevy Head Gasket Set
    Speedway 1955-76 Small Block Chevy Head Gasket Set
    (Part #5501130)
    x
                

    Speedway Small Block Chevy (SBC) composite head gaskets use premium materials to ensure a positive seal on any race or street engine. This gasket is sold in pairs.

    • Sold in Pairs
    • 4.0" bore steel shim (.016")
    • Small Block Chevy
    • 1957-1976 Only

    NOTE: Only fits 1957-1976 Chevy blocks and heads (they will leak at the bottom of later heads). Will NOT fit 1996-1999 GM "Vortec" 906 heads and 062 heads, or RHS Vortec heads.

  • Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    (Part #3441206)
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            

Filter

"Open Wheel, Gaskets and Seals" Page 1 of 7

Page 1 of 7

  • Small Block Chevy Valve Cover Gaskets, Vortec Heads
    Small Block Chevy Valve Cover Gaskets, Vortec Heads
    (Part #91010218)
    x
                

    Rubber valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC) with vortec heads.

  • Moroso 23961 Oil Pan Scavenge Screens
    Moroso 23961 Oil Pan Scavenge Screens
    (Part #54523961)
    x
                

    Screws right into port fittings in your oil pan. Helps to keep debris from damaging your expensive oil pump. -12 port fittings x-12 AN.

    • Traps metal chips and debris before reaching external or dry sump oil pumps, or rear end lube pumps
    • 304 stainless steel screen uses .015" diameter, 16 mesh wire
    • Easily removed for cleaning

     

  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    (Part #91010217)
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    (Part #573195)
    x
                

    These universal oil filter adapters come with 6 different thread size adapters to make installation easy on a variety of applications. They are designed to be mounted between the engine block and oil filter to route oil to a remote oil cooler.

    • 3/8 NPT ports
    • Special thread adapters cover 90% of engines
    • Die cast aluminum
    • Add an oil cooler and remote filter

    Oil Filter Adapter 195 Installation Instructions (PDF)

     

  • J-B Weld 8276 Kwik Epoxy Putty
    J-B Weld 8276 Kwik Epoxy Putty
    (Part #91080180)
    x
                

    J-B Weld is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. The Kwik Weld formula, which when mixed in equal parts, sets in 4 minutes. JB Weld bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper - just about any porous and non-porous material. When cured, you can drill it, tap it, and machine it.

    • Gasoline, petroleum, chemical, and acid resistant
    • Waterproof
    • Sets in 4 minutes, fully cures in 4 hours
    • Withstands temperatures up to 300° F
  • Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    (Part #3442802)
    x
                

    Fel Pro Performance V8 gasket set for 1955-79 S/B Chevy with left hand dipstick. Fits 283, 302, 307, 327, and 350 with stock or small intake and exhaust ports (excluding most aluminum blocks).

    • #1003 Head Gaskets
      • pre-flattened steel wire ring
      • 4.166" gasket bore
      • 0.041" nominal compression thickness
      • 9.1 cc compressed volume
    • Intake Gaskets
      • 1.23" x 1.99"  port size
      • .060" thickness
    • Header Gaskets have 1.38" x 1.38" ports
  • Speedway 1957-85 Chevy 283-350 Complete Gasket Set
    Speedway 1957-85 Chevy 283-350 Complete Gasket Set
    (Part #91010255)
    x
                

    Speedway Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    (Part #3441244)
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    (Part #344KS2614)
    x
                

    The Fel-Pro Overhaul Gasket Set includes the composite head gasket (Fel Pro # 8364PT), valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Fits 1970-1980 Small Block Chevy 400 V8.

  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (Part #3441003)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Speedway Small Block Chevy Overhaul Gasket Set, 400 Chevy '70-'81
    Speedway Small Block Chevy Overhaul Gasket Set, 400 Chevy '70-'81
    (Part #9152400)
    x
                

    Seedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.

  • Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    (Part #9152350)
    x
                Speedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Henchcraft 2009-Up GSXR Oil Pressure Line Adpater Fitting
    Henchcraft 2009-Up GSXR Oil Pressure Line Adpater Fitting
    (Part #97010031)
    x
                

    New from Henchcraft Chassis, these oil fittings are designed for use with Mini Lightning Sprint ZX10, R1, or GSXR engines. These aluminum adapters screw to the engine case for the placement of oil line fittings for gauges.

    • Fitting for oil pressure line
    • ZX10, R1, or GSXR
    • Adapts engine port to AN line
    • For use on 2009-Up applications
    • O-ring makes for leak proof seal
  • Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    (Part #3441818)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8"

  • Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    (Part #91010215)
    x
                

    Composite valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    (Part #3441821)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8" and the thin front seal is 1/4".

  • Replacement Seal for Small Block Chevy Cam Plug
    Replacement Seal for Small Block Chevy Cam Plug
    (Part #94014003)
    x
                Rear cam drive seal only for a standard bearing block. Helps prevent oil, dirt, and other potential particles out of engine area.
            
  • Small Block Chevy Camshaft Rear Seal, Roller Block, 2.090 O.D.
    Small Block Chevy Camshaft Rear Seal, Roller Block, 2.090 O.D.
    (Part #94014002)
    x
                

    These rear camshaft drive seal plates for roller cam bearing blocks help prevent oil, dirt, and other potential particles from entering your bearings while retaining your oil.  These seals are OEM replacements that will provide a secure, leak-free seal on your small block Chevy rebuild.

    • Roller cam bearing blocks
    • Prevents oil, dirt, and debris from entering your bearings
    • OEM replacement
    • Provides a secure, leak-free seal
    • Small Block Chevy Rear Seal
    • Red, rubber material

     

  • Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    (Part #3441604)
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Winters Performance 5290-01 Large Inspection Plug
    Winters Performance 5290-01 Large Inspection Plug
    (Part #8025290)
    x
                If you have ever removed the original plugs in a Winters Pro Eliminator rear end, you know how hard they are to get a wrench on. These billet aluminum plugs replace the fill and drain plugs and accept a 9/16" socket.
            
Goto Previous PagePrevious Page
1 2 3 4 5 6 7