Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Engine At Speedway Motors

Speedway Motors is the open wheel racing engine authority! Whether you have a 360, 410, USAC or Outlaw series Chevy race engine, Speedway has every part Sprint and Midget racers need. Our large assortment of cylinder heads, camshafts and racing valve train components allows you to tailor your engine for any racing condition. Speedway also has a variety of durable forged rotating assemblies, dry sump oiling systems and Dart engine blocks that can survive the rigors of open wheel racing. Race and win with Speedway Motors!

"Open Wheel, Gaskets and Seals" Page 1 of 4

  • Small Block Chevy Valve Cover Gaskets, Vortec Heads
    Small Block Chevy Valve Cover Gaskets, Vortec Heads
    (Part #91010218)
    x
                

    Rubber valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC) with vortec heads.

  • Moroso 23961 Oil Pan Scavenge Screens
    Moroso 23961 Oil Pan Scavenge Screens
    (Part #54523961)
    x
                

    Screws right into port fittings in your oil pan. Helps to keep debris from damaging your expensive oil pump. -12 port fittings x-12 AN.

    • Traps metal chips and debris before reaching external or dry sump oil pumps, or rear end lube pumps
    • 304 stainless steel screen uses .015" diameter, 16 mesh wire
    • Easily removed for cleaning

     

  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    (Part #91010217)
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    (Part #573195)
    x
                

    These universal oil filter adapters come with 6 different thread size adapters to make installation easy on a variety of applications. They are designed to be mounted between the engine block and oil filter to route oil to a remote oil cooler.

    • 3/8 NPT ports
    • Special thread adapters cover 90% of engines
    • Die cast aluminum
    • Add an oil cooler and remote filter

    Oil Filter Adapter 195 Installation Instructions (PDF)

     

  • J-B Weld 8276 Kwik Epoxy Putty
    J-B Weld 8276 Kwik Epoxy Putty
    (Part #91080180)
    x
                

    J-B Weld is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. The Kwik Weld formula, which when mixed in equal parts, sets in 4 minutes. JB Weld bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper - just about any porous and non-porous material. When cured, you can drill it, tap it, and machine it.

    • Gasoline, petroleum, chemical, and acid resistant
    • Waterproof
    • Sets in 4 minutes, fully cures in 4 hours
    • Withstands temperatures up to 300° F
  • Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    (Part #3442802)
    x
                

    Fel Pro Performance V8 gasket set for 1955-79 S/B Chevy with left hand dipstick. Fits 283, 302, 307, 327, and 350 with stock or small intake and exhaust ports (excluding most aluminum blocks).

    • #1003 Head Gaskets
      • pre-flattened steel wire ring
      • 4.166" gasket bore
      • 0.041" nominal compression thickness
      • 9.1 cc compressed volume
    • Intake Gaskets
      • 1.23" x 1.99"  port size
      • .060" thickness
    • Header Gaskets have 1.38" x 1.38" ports
  • SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    (Part #91010255)
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    (Part #3441244)
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    (Part #344KS2614)
    x
                

    The Fel-Pro Overhaul Gasket Set includes the composite head gasket (Fel Pro # 8364PT), valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Fits 1970-1980 Small Block Chevy 400 V8.

  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (Part #3441003)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    (Part #9152400)
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    (Part #9152350)
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Henchcraft 2009-Up GSXR Oil Pressure Line Adpater Fitting
    Henchcraft 2009-Up GSXR Oil Pressure Line Adpater Fitting
    (Part #97010031)
    x
                

    New from Henchcraft Chassis, these oil fittings are designed for use with Mini Lightning Sprint ZX10, R1, or GSXR engines. These aluminum adapters screw to the engine case for the placement of oil line fittings for gauges.

    • Fitting for oil pressure line
    • ZX10, R1, or GSXR
    • Adapts engine port to AN line
    • For use on 2009-Up applications
    • O-ring makes for leak proof seal
  • Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    (Part #3441818)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8"

  • Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    (Part #91010215)
    x
                

    Composite valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    (Part #3441821)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8" and the thin front seal is 1/4".

  • Replacement Seal for Small Block Chevy Cam Plug
    Replacement Seal for Small Block Chevy Cam Plug
    (Part #94014003)
    x
                Rear cam drive seal only for a standard bearing block. Helps prevent oil, dirt, and other potential particles out of engine area.
            
  • Small Block Chevy Camshaft Rear Seal, Roller Block, 2.090 O.D.
    Small Block Chevy Camshaft Rear Seal, Roller Block, 2.090 O.D.
    (Part #94014002)
    x
                

    These rear camshaft drive seal plates for roller cam bearing blocks help prevent oil, dirt, and other potential particles from entering your bearings while retaining your oil.  These seals are OEM replacements that will provide a secure, leak-free seal on your small block Chevy rebuild.

    • Roller cam bearing blocks
    • Prevents oil, dirt, and debris from entering your bearings
    • OEM replacement
    • Provides a secure, leak-free seal
    • Small Block Chevy Rear Seal
    • Red, rubber material

     

  • Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    (Part #3441604)
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Winters Performance 5290-01 Large Inspection Plug
    Winters Performance 5290-01 Large Inspection Plug
    (Part #8025290)
    x
                If you have ever removed the original plugs in a Winters Pro Eliminator rear end, you know how hard they are to get a wrench on. These billet aluminum plugs replace the fill and drain plugs and accept a 9/16" socket.
            
  • Fel-Pro 1144 S/B Chevy 400 Head Gasket, Multi-layer Steel, 4.200 Bore
    Fel-Pro 1144 S/B Chevy 400 Head Gasket, Multi-layer Steel, 4.200 Bore
    (Part #3441144)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Small Block 400 with steam holes aluminum block and heads or cast-iron heads.
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

  • Cometic EC1104018AFM Yamaha R6 Ignition Cover Gasket
    Cometic EC1104018AFM Yamaha R6 Ignition Cover Gasket
    (Part #960613)
    x
                

    Ideal gasket material for machined surfaces, especially when used between two uneven stamped surfaces that have been plated. AFM is a chemically blown, compounded Nitrile synthetic rubber bonded to an aluminum core with temperature resistance of over 250°F. AFM material has an 85% recovery while maintaining a strong torque retention. AFM does not require gasket sealers or silicone bead. Re-torque is NOT required.

    Fits 2006-Present Models.

  • Super Seal SB Chevy 400 Head Gaskets, 4.125 In Bore w/Steam Holes
    Super Seal SB Chevy 400 Head Gaskets, 4.125 In Bore w/Steam Holes
    (Part #91010202)
    x
                

    Super Seal Small Block Chevy (SBC) composite head gaskets use premium materials to ensure a positive seal on any race or street engine.

    Sold as each.

  • EngineQuest AT350 Small Block Chevy Rear Main Alignment Tool
    EngineQuest AT350 Small Block Chevy Rear Main Alignment Tool
    (Part #91015012)
    x
                Small block Chevy rear main alignment tool
            
  • Cometic EX425064AM S/B Chevy Gaskets, Brodix D-Port, Std Bolt Pattern
    Cometic EX425064AM S/B Chevy Gaskets, Brodix D-Port, Std Bolt Pattern
    (Part #91013502)
    x
                
    • Brodix D-port style
    • Standard bolt pattern
    • Multi-layer steel gasket material
    • .062" Thick
    • Sold individually
  • Chevy Billet Oil Filter Bypass Adapter
    Chevy Billet Oil Filter Bypass Adapter
    (Part #54523775)
    x
                

    Trade that failure prone die cast piece with the internal bypass for this billet aluminum piece. The original bypass version allows unfiltered oil back into the engine at high pressure. These bolt right in and are much stronger.

    • Eliminates the failure-prone factory bypass 
    • Forces 100% of engine oil through the filter
    • Fits SBC and BBC engines ('68-up)
    • Can be used with stock type spin-on oil filters
    • Easy 2 bolt installation
  • Fel-Pro 1143 SB Chevy 265-400 Head Gasket-4.165 Bore-Multi-layer Steel
    Fel-Pro 1143 SB Chevy 265-400 Head Gasket-4.165 Bore-Multi-layer Steel
    (Part #3441143)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Multi-layer
    • Nominal compression thickness: .041"
    • Compressed volume: 9.2 cc
    • Big bore multi-layer 400 small block Chevy
    • 4.165" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    (Part #550179)
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Features a 5/16" extra thick cork/neoprene blend.

  • Seals-It TBS2S-07 Motor Plate Adapter for Torque Ball Seal
    Seals-It TBS2S-07 Motor Plate Adapter for Torque Ball Seal
    (Part #9402344)
    x
                This seal kit fits in the motor plate hole and helps keep dirt out of the U-joint and torque tube. 
            
  • Cometic H2256SP2027S 2003-2005 Yamaha R6 Head Gasket, Stock Bore
    Cometic H2256SP2027S 2003-2005 Yamaha R6 Head Gasket, Stock Bore
    (Part #960625)
    x
                

    Cometic MLS Gaskets provide maximum sealing performance for today’s high output engines and require no sealants. They are comprised of multiple layers of stainless steel to increase strength, ability to rebound, and resistance to corrosion.

    • Ideal for aluminum heads to aluminum blocks
    • No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion
    • .027" Thick
  • SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    (Part #91010224)
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • 1986-Up one-piece
    • Approx 1/8" thick
    • Gray gasket w/ torque limiting washers
  • Valve Cover Hold Down Clamps
    From: $5.99
    Product Rating: 5.00 Stars
    Valve Cover Hold Down Clamps
    (Part #91017002)
    x
                Set of eight for small block Chevy hold down clamps. Available in Zinc or Chrome and are 5" long overall.
            
  • Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    (Part #3441603)
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Oil Filter Adapter without Bypass
    Oil Filter Adapter without Bypass
    (Part #7201027)
    x
                

    Unlike an original OEM piece, this non-bypass adapter is designed to force 100% of the engine oil through the filter. It fits 1967 and newer small block and big block Chevys. The adapter includes one gasket and two 5/16-18 x 1" shocket head cap screws.

    • Replacement for stock oil filter to spin-on style oil filters
    • Designed to fit 1967 or newer small block and big block Chevy
    • Aluminum
    • Non-bypass adapter
    • Includes one gasket and two 5/16-18 x 1" shocket head cap screws

    Note: As an alternative, our parts # 720-1029 or 720-1044 are remote filter mounts that will fit modern spin-on filters with 13/16”-16 threads (replacing your old canister-type filter).

  • Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    (Part #550175)
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Gaskets fit '60-'86 "straight" bolt heads.

  • SuperSeal SB Chevy Intake Gasket Set, 1206 Style, 1/8 In Thick
    SuperSeal SB Chevy Intake Gasket Set, 1206 Style, 1/8 In Thick
    (Part #91010235)
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
Goto Previous PagePrevious Page
1 2 3 4