Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors stocks all the parts and pieces you need to put together a winning fuel delivery system in your sprint or midget. Plus, we have a great selection of bladders and tanks, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and Kinser. Speedway can fuel your need for speed!

"Open Wheel, Fuel Storage" Page 1 of 6

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    x
                

    These replacement front covers are perfect for your fuel cell with a 7" x 12" opening.  They are designed to fit the front side of the tank for your Sprint car and feature quality aluminum construction.

    • Replacement cover
    • Fits front of fuel cell
    • 7" x 12"
    • Aluminum
  • Aluminum Fuel Manifold Fitting
    Aluminum Fuel Manifold Fitting
    x
                          This handy little aluminum fuel manifold fitting allows you to plumb all your return lines right at the injector. That saves you weight and space because you don't have to run all the lines back to the tank. Choose AN8 or AN10 to lead to three AN6 male ends.            
            
  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    x
                

    Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

    • Max operating pressure is 2250 psi
    • Minimum bend radius is 4"
    • Temperature range of -55°F to +300°F
    • Hose is sold by the foot

    Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

    AN Thread Sizing Guide (GIF)

    AN 6 Hose Application Chart (GIF)

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. 90° elbow -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    • -6 AN female to push-on adapter
    • 90° elbow fuel line hose connector
    • 37° angled sealing surface guarantees a positive anti-leak seal

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Premium Black Sythetic Hose - AN10
    Premium Black Sythetic Hose - AN10
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.155 lbs.
    • Minimum Bend Radius:  4.0 in.

     

  • 3/8 Inch-24 Inverted Male Flare Plug for Master Cylinder Ports
    3/8 Inch-24 Inverted Male Flare Plug for Master Cylinder Ports
    x
                These threaded plug fittings are designed for use on master cylinders with 3/8"-24 IFM unused ports.
    • 3/8"-24 IFF Plug
    • Use to plug unused ports on double sided master cylinder
  • Tight Fit 90 Degree Socketless Reusable Fittings
    Tight Fit 90 Degree Socketless Reusable Fittings
    x
                

    These tight fit 90° steel fittings work great for a variety of different applications.  They feature your choice of -4, -6, or -8 AN male/female ends with a corrosion resistant finish.

    • Working pressure of 5500 psi 
    • 90° steel fuel line hose connector
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Choose from -4 AN, -6 AN, or -8 AN sizes

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Premium Black Synthetic Hose - AN8
    Premium Black Synthetic Hose - AN8
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.120 lbs.
    • Minimum Bend Radius:  3.5 in.

    Works great as a fuel line for gasoline and alcohol fuels.

  • Premium Black Synthetic Hose - AN16
    Premium Black Synthetic Hose - AN16
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 350 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.320 lbs.
    • Minimum Bend Radius:  5.5 in.

     

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, Straight
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, Straight
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. Straight -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    • -6 AN female to push-on adapter
    • Straight style line hose end connector/coupler
    • Available in a Zinc plated finish

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Premium Black Synthetic Hose - AN6
    Premium Black Synthetic Hose - AN6
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.095 lbs.
    • Minimum Bend Radius:  2.5 in.

    Works great as a fuel line for gasoline and alcohol fuels.

  • Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    x
                

    Use this special aluminum spanner key for our fuel filler neck (617-9040).  They allow you to access your fuel with the ability to leave with a locked lid.

    • Aluminum replacement spanner key
    • For fuel filler neck/lid (6179040)
    • Access fuel from secured lid
  • Blue Straight AN10 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    Blue Straight AN10 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/8" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN male to 3/8" aluminum pipe connector
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Russell 670340 Fuel Pressure T-Off Fitting -6 AN Male - Female 1/8 NPT
    Russell 670340 Fuel Pressure T-Off Fitting -6 AN Male - Female 1/8 NPT
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 6 male on one end; AN 6 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • 45 Degree Flare Adaptor, AN3 to 1/8 Inch NPT
    45 Degree Flare Adaptor, AN3 to 1/8 Inch NPT
    x
                

    Pipe to 45° flare adaptor. 37° AN. Order desired size.

    Fitting Thread Application Chart (GIF)

  • Black Push-On Hose, -6 AN
    From: $9.99
    Product Rating: 5.00 Stars
    Black Push-On Hose, -6 AN
    x
                

    AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push on fittings
    • When using at temp and pressure at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Speedway Billet Tank Mount Tube Clamps
    Speedway Billet Tank Mount Tube Clamps
    x
                

    Don't fight hold placement of brackets when changing tanks. Use these tube clamps to position the tank in the correct spot with ease. Clamps to 1 3/8" tube and includes mounting hardware. 

    These mounts replace the welded frame tabs and clamp on to the cross tube. They can be rotated to move the upper fuel tank bolt for perfect alignment. You will never have to muscle in a fuel tank or fabricate new hole each time you install a new fuel tank.

    • Lightweight but strong
    • Made from 6061 Billet Aluminum
    • Black Anodized
  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • SBI SB 128FF-T Sprint Fuel Forward Tank Bladder Only, 28 Gallon
    SBI SB 128FF-T Sprint Fuel Forward Tank Bladder Only, 28 Gallon
    x
                

    Designed for short tracks, the SBI Fuel Forward baffle system helps keep your fuel load forward in the tank as the fuel level decreases. The anti-slosh and fuel containment characteristics make your car handle more consistently as you burn fuel. This special baffle concept lets you pick up almost every drop of fuel.

    • For use with alcohol fuel only
    • Two year manufacturer warranty

    Bladder Maitenance (PDF)

  • Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 8 male on one end; AN 8 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Fuel Safe ST333 Outlaw Sprint Replacement Fuel Shell, 33 Gallon
    Fuel Safe ST333 Outlaw Sprint Replacement Fuel Shell, 33 Gallon
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    New
    Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -6 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • SBI Fuel Systems SB 125-T Sprint Fuel Tank Bladder Only, 25 Gallon
    SBI Fuel Systems SB 125-T Sprint Fuel Tank Bladder Only, 25 Gallon
    x
                
    • For use with alcohol fuel only
    • Two year manufacturer warranty

    Bladder Maitenance (PDF)

  • SBI MB 116-TA Sprint Fuel Tank Bladder Only, 16 Gallon, Alcohol
    SBI MB 116-TA Sprint Fuel Tank Bladder Only, 16 Gallon, Alcohol
    x
                
    • For use with alcohol fuel only
    • Two year manufacturer warranty

    Bladder Maitenance (PDF)

  • Sprint Car Tail Tank Thermal Cover
    Sprint Car Tail Tank Thermal Cover
    x
                Fits standard outlaw style tank.
            
  • Premium Black Synthetic Hose - AN4
    Premium Black Synthetic Hose - AN4
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.075 lbs.
    • Minimum Bend Radius:  2.0 in.
  • Black Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 3.00 Stars
    Black Push-On Hose, -8 AN
    x
                

    AN8 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the hig end of the parameter, hose clamps shoudl be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    x
                

    These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

    • AN to hose barb 
    • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
    • Use with Aeroquip Special Application blue hose
    • For use with 37° AN style fittings

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 6