Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ open wheel race car bodies and chassis components are second to none! Speedway has the best chassis, cage kits, seats, and parts for sprint cars and midgets from top names like Auto Meter, Eagle Motorsports and Spike Chassis. With a wide selection of sprint car hoods, racing seats, front or rear bumpers, side panels and safety armguards, it’s one stop shopping for all your Sprint car speed needs. Don't forget about our huge selection of midgets performance parts as well!

"Open Wheel, Frame" Page 1 of 1

  • LEAD BALLAST 25 LBS
    $79.99
    Product Rating: 5.00 Stars
    LEAD BALLAST 25 LBS
    (Part #91045002)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • Lower V Brace for Regular Rear K Member
    Lower V Brace for Regular Rear K Member
    (Part #91637090)
    x
                1" diameter 4130 Chromoly.  Coped and sized to match original factory pieces.
            
  • LEAD BALLAST-2 13LB. PIECES
    $79.99
    LEAD BALLAST-2 13LB. PIECES
    (Part #91045003)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. 
    • 1 ½” tall x 2 ½” wide x 8 ½” long
    • Pieces are approximately 13 lbs. each
    • Sold in pairs

    Ships anywhere in the US lower 48 states via USPS Flat Rate for only $5.80 per pair ordered! To take advantage of this shipping offer, please place your order for any other items that you may require on a second or separate order as the lead ballasts must ship alone

    At check out, please place the following "USPS Flate Rate Shipping" in the comments box.  We will then modify your order when processing for shipment at our facility to see that the flat rate shipping cost is applied and reflected on your order.

  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

  • Lower V Brace for Long Rear K Member
    Lower V Brace for Long Rear K Member
    (Part #91637091)
    x
                1" diameter 4130 Chromoly.  Coped and sized to match original factory pieces.
            
  • Radiator X Long-Short Piece
    $19.99
    Radiator X Long-Short Piece
    (Part #91637086)
    x
                
    • 1" x .049" 4130 material
    • Direct replacement for Maxim chassis
    • Coped ends mate to 1.25" tube
  • DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    (Part #35610408)
    x
                

    Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

    • Withstands direct heat up to 400°F and 2000°F radiant heat
    • Protects lines, hoses, cables, and more
    • Aluminized and bonded to fiberglass
    • Flexible and easy to apply
    • Strong self-adhesive backing
    • Use to secure panels, seal air boxes, wrap wiring & more

    Cool Tape Frequently Asked Questions (PDF)

  • HRP HRP3600 Repair Slug For Top Rail
    HRP HRP3600 Repair Slug For Top Rail
    (Part #91637098)
    x
                

    Never butt tubes together without inserting a slug first.  Use these CNC turned inserts to give your top rail joint proper alignment and strength.

    Repair slug is 1.310" o/d x 0.087" wall thickness x 3" long to be used inside 1-1/2" x 0.095" wall tubing.

  • 60 PC GUSSET/TAB KIT
    $49.99
    $51.99
    Product Rating: 5.00 Stars
    60 PC GUSSET/TAB KIT
    (Part #91091025)
    x
                

    This Gusset Kit / Tab Kit includes:

    • (10) - Standard gussets with 1/2" hole
    • (10) - Standard 3 hole gussets
    • (10) - Chassis tab, 3/16" steel with 1/2" hole
    • (10) - Trick tab, 1/8" steel with 1/4" hole
    • (10) - Body tabs, .085" steel with 1/4" hole
    • (10) - seat belt tabs, 3/16" steel with 1/2" hole
  • Safety Strap Locator
    $1.99
    Safety Strap Locator
    (Part #91637082)
    x
                Keep tethers and cage nets in place using these wire formed locators. Great for drag link straps, cage nets, or other nets in place. Will work for both Sprint Cars and Midgets.
            
  • Front Cross Member, "X" Member Unassembled
    Front Cross Member, "X" Member Unassembled
    (Part #91637084)
    x
                Sized to fit the most popular brands, these tubes are 1" diameter 4130 Chromoly.  Choose the "X" configuration as a factory replacement.
            
  • Stainless Steel Tube Weight Clamp
    $4.99
    $5.99
    Stainless Steel Tube Weight Clamp
    (Part #910471)
    x
                

    This stainless steel "U" clamp is designed to fit around 1.25" or 1.375" diameter tubing.  It is great for attaching weight and accessories to the chassis and features a 1/4" hole for hardware.

    • "U"-shaped clamp
    • Fits 1.25" or 1.375" diameter tubing
    • 1/4" hole for hardware
    • Attaches accessories to racing chassis
  • Safety Bar Kit, Right Side
    $39.99
    Safety Bar Kit, Right Side
    (Part #91637019)
    x
                Protect from side intrusion with these add-ons to your chassis.  Bent to conform to the most popular fiberglass options.  1-1/4" x .065 wall 4130, each kit includes bent upright and supporting gusset.
            
  • Butlerbuilt BBP-4801 Torque Ball Shield Mount Kit, Sprint Racing
    Butlerbuilt BBP-4801 Torque Ball Shield Mount Kit, Sprint Racing
    (Part #2024801)
    x
                These are replacement mounting bracket kits for our torque ball shield (202-4800).  Torque ball shields protect the driver's feet and legs from injury during catastrophic driveline failure.
    • Replacement mounting brackets and bolts
    • Easy installation.....no fabrication required
    • Mounts to bellhousing
    • Easily removed for quick torque tube servicing
  • RADIATOR 'X' SHORT PC
    $19.99
    RADIATOR 'X' SHORT PC
    (Part #91637087)
    x
                
    • 1" x .049" 4130 material
    • Direct replacement for Maxim chassis
    • Coped ends mate to 1.25" tube
  • Safety Bar Kit, Left Side
    $39.99
    Safety Bar Kit, Left Side
    (Part #91637026)
    x
                Protect from side intrusion with these add-ons to your chassis.  Bent to conform to the most popular fiberglass options.  1-1/4" x .065 wall 4130, each kit includes bent upright and supporting gusset.
            
  • HRP HRP3601 Repair Slug For Bottom Rail
    HRP HRP3601 Repair Slug For Bottom Rail
    (Part #91637099)
    x
                

    Never butt tubes together without inserting a slug first.  Use these CNC turned inserts to give your bottom rail joint proper alignment and strength. 

    Repair slug is1.190" o/d x 0.090" wall thickness x 3" long to be used inside 1-3/8" x 0.095" wall tubing

  • LEAD BALLAST - 50 LBS
    $159.99
    LEAD BALLAST - 50 LBS
    (Part #91045001)
    x
                Lead ballast allows you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 racing. 
            
  • Lower V Brace for Front K Member
    Lower V Brace for Front K Member
    (Part #91637089)
    x
                1" diameter 4130 Chromoly.  Coped and sized to match original factory pieces.
            
  • RADIATOR 'X' LONG PC
    $19.99
    RADIATOR 'X' LONG PC
    (Part #91637085)
    x
                
    • 1" x .049" 4130 material
    • Direct replacement for Maxim chassis
    • Coped ends mate to 1.25" tube
  • DEi 010413 Cool-Tape Plus    Heat Reflective Tape, 2 Inch x 60 Ft.
    DEi 010413 Cool-Tape Plus Heat Reflective Tape, 2 Inch x 60 Ft.
    (Part #35610413)
    x
                

    Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

    • Withstands direct heat up to 400°F and 2000°F radiant heat
    • Protects lines, hoses, cables, and more
    • Aluminized and bonded to fiberglass
    • Flexible and easy to apply
    • Strong self-adhesive backing
    • Use to secure panels, seal air boxes, wrap wiring & more

    Cool Tape Frequently Asked Questions (PDF)

  • Safety Bar Gusset
    $14.99
    Safety Bar Gusset
    (Part #91637023)
    x
                Use these factory spec tubular parts to brace repaired areas.
            
  • Jacobs Ladder Front Tube Gusset
    Jacobs Ladder Front Tube Gusset
    (Part #91637021)
    x
                Use these factory spec tubular parts to brace repaired areas.
            
  • Butlerbuilt BBP-4800 Torque Ball Shield, Sprint Racing
    Butlerbuilt BBP-4800 Torque Ball Shield, Sprint Racing
    (Part #2024800)
    x
                These quality torque ball shields are constructed using multiple layers of ballistic  Kevlar.  They protect the driver's feet and legs from injury during catastrophic driveline failure.  Mounts easily to bellhousing.
    • Constructed using multiple layers of ballistic Kevlar
    • Protects driver's feet and legs from injury during catastrophic driveline failure
    • Easy installation.....no fabrication required
    • Mounts to bellhousing
    • Easily removed for quick torque tube servicing
    • Mounting brackets and bolts included
  • Jacobs Ladder Rear Tube Gusset
    Jacobs Ladder Rear Tube Gusset
    (Part #91637020)
    x
                Use these factory spec tubular parts to brace repaired areas.
            
  • 2005 Featherlite Aluminum Fifth Wheel Trailer
    Garage Sale
    2005 Featherlite Aluminum Fifth Wheel Trailer
    (Part #94900016)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1 Inch Fire Resistant Firewall Sleeve
    Garage Sale
    Garage Sale - 1 Inch Fire Resistant Firewall Sleeve
    (Part #91080234.GS)
    x
                Please view the product's page for more information
            
  • Garage Sale - Speedway 40 Lbs. Lead Ballast
    Garage Sale
    Garage Sale - Speedway 40 Lbs. Lead Ballast
    (Part #91045004.GS)
    x
                

    These ballasts are garage sale priced because they are different than what we currently offer.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find.  

    These ballasts have over all outside dimensions of: 12.5" long, 5.75" wide and 2.0" tall

  • Garage Sale - 2003 Chevy-GMC & Caddy Brake Control Adapter Harnesses
    Garage Sale
    Garage Sale - 2003 Chevy-GMC & Caddy Brake Control Adapter Harnesses
    (Part #60815264)
    x
                

    Available for 2003 Chevy/GMC & Cadillac models.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Aluminum Body Mounting Bracket
    Garage Sale
    Garage Sale - Aluminum Body Mounting Bracket
    (Part #91004055)
    x
                

    Aluminum body mounting bracket. Designed for 1-1/2" round tube.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - AFCO Ballast Bracket, 1-1/2"
    Garage Sale
    Garage Sale - AFCO Ballast Bracket, 1-1/2"
    (Part #AUP1839)
    x
                

    AFCO Ballast Brackets

    • 1-1/2 Inch Round
     
    Clearance!
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 3/4 Inch Fire Resistant Firewall Sleeve
    Garage Sale
    Garage Sale - 3/4 Inch Fire Resistant Firewall Sleeve
    (Part #91080232.GS)
    x
                

    These fire stop sleeve kits allow you to run wires, hoses or cables through your firewall or any other bulkhead. They include a  unique intumescent putty which when exposed to hight heat, actually expands and seals off smoke, fumes and flames. Fire stop sleeve also reduces the amount of gas and fumes that enters through the firewall under normal operating conditions.

    Approved for use in NASCAR, SCCA and IMCA competition.

    Choose 1/2", 3/4" or 1" sizes. Total cable or wire size needs to be half the diameter of the sleeve.

     

    These sleeves are garage sale priced because they are longer than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Fire Stop Foam Sponges
    $14.99
    $29.99
    Garage Sale
    Garage Sale - Fire Stop Foam Sponges
    (Part #91099773.GS)
    x
                

    This set includes:

    2, 2-1/2" X 2-1/2" Squares

    1, 4" round 

    1, 4" X 4" Square

     

    This kit is garage sale priced because we do not usually stock it.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Dirtworks Style Roof Posts
    $59.99
    $89.99
    Garage Sale
    Dirtworks Style Roof Posts
    (Part #91074112)
    x
                

    Each panel is being sold individually. Limit colors available.  

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Aluminized Heat Barrier, 2 Sheets of 40 X 17 Inch
    Garage Sale
    Garage Sale - Aluminized Heat Barrier, 2 Sheets of 40 X 17 Inch
    (Part #UP44466)
    x
                

    This heat shield is garage sale priced because it is cut in 2 16-17" X 40" pieces.  What you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Protect your equipment from radiant heat. Often used to create curtains and screens, this sheeting has an aluminum foil backing that reflects heat and withstands temperatures up to 300° F. The fiberglass fabric base is off-white and has a maximum temperature of 1000° F. Foil backing is silver.

  • Garage Sale - Ford Brake Control Adapter Harnesses
    Garage Sale
    Garage Sale - Ford Brake Control Adapter Harnesses
    (Part #60815260)
    x
                

    Available for Ford models.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 1999-2002 Chevy-GMC-Cadillac Brake Control Harnesses
    Garage Sale
    Garage Sale - 1999-2002 Chevy-GMC-Cadillac Brake Control Harnesses
    (Part #60815263)
    x
                

    Available for 1999-2002 Chevy/GMC & Cadillac models.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Adjustable Settering Block and Washer
    Garage Sale
    Garage Sale - Adjustable Settering Block and Washer
    (Part #30460GS)
    x
                

    This block and washer is garage sale priced because we don't usually stock them.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Schnee Chassis Sprint Racing Fiberglass RH Safety Armguard
    Garage Sale
    Garage Sale - Schnee Chassis Sprint Racing Fiberglass RH Safety Armguard
    (Part #UP40104)
    x
                Schnee Chassis factory-built component. This armguard fully encloses the cockpit on the RH side and works on any chassis.
    • High density fiberglass construction
    • Withstands abuse from dirt, mud and rocks
    • No interference with full containment seats
     
    This is garage sale priced because it was damaged in shipping.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   
  • Garage Sale - Trans-Dapt 9750 Trailer Tote
    Garage Sale
    Garage Sale - Trans-Dapt 9750 Trailer Tote
    (Part #7209750)
    x
                

    Painted steel trailer tote with 1-7/8" trailer ball included. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS