Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 17

Products

Fittings and Hose

Shop Open Wheel Fittings & Hose At Speedway Motors

Speedway Motors has hundreds of fuel and oil line fittings in stock and ready to ship! Plumb your open wheel race car with the same hose and fittings the big-name professional racers use like Jiffy-Tite and Fragola. We stock everything from anodized AN fittings to high-pressure stainless steel braided line.

Featured Products
  • Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    (Part #47223)
    x
                

    These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

    • AN to hose barb 
    • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
    • Use with Aeroquip Special Application blue hose
    • For use with 37° AN style fittings

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Fragola 209108BL Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    Fragola 209108BL Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    (Part #61729181)
    x
                

    This black 90 degree hose fitting adapter from Fragola allows you to connect a -6 AN hose to an -8 AN fitting. Fragola Performance Systems Series 8000 Push-Lite hose fittings are made from high quality material for performance and durability.

    • Aluminum Construction
    • 90 Degree
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet
    • Sold Individually
    • Black
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends
  • Aluminum Black Tube Nut Sleeve, -6 AN, 3/8 Inch, 2/Pack
    Aluminum Black Tube Nut Sleeve, -6 AN, 3/8 Inch, 2/Pack
    (Part #61760651)
    x
                
    These tube nut sleeves, when used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    (Part #106332)
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    (Part #91031820)
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Aluminum Tube Nut Couplers, -6 AN, 3/8 Inch, Black, Pack of 2
    Aluminum Tube Nut Couplers, -6 AN, 3/8 Inch, Black, Pack of 2
    (Part #61760571)
    x
                
    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.
    • 2 Pack
  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    (Part #106333)
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

Filter

"Open Wheel, Fittings and Hose" Page 1 of 17

Page 1 of 17

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    (Part #91031820)
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    (Part #6174255)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • AN Fitting Plug, -8 AN
    $4.99
    AN Fitting Plug, -8 AN
    (Part #54523804)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Quick Tight Hose Clamp, 3/4 - 1 Inch
    Quick Tight Hose Clamp, 3/4 - 1 Inch
    (Part #91015760)
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over .75" to 1.00" O.D. hose.
            
  • AN16 Fitting Caps, 4/pk
    $5.99
    AN16 Fitting Caps, 4/pk
    (Part #54523811)
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    (Part #6177035)
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 8 male on one end; AN 8 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    (Part #1061440)
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • 3325X6 Brass Nipple Pipe Fitting, 3/8 Inch NPT to 3/8 Inch NPT
    New
    3325X6 Brass Nipple Pipe Fitting, 3/8 Inch NPT to 3/8 Inch NPT
    (Part #6175028)
    x
                

    This brass nipple pipe fitting features two 3/8 inch NPT fitting ends with a straight brass design.

    • Brass construction
    • Straigh angle
    • 3/8 inch NPT fitting end A
    • 3/8 inch NPT fitting end B 
  • Fragola        Series 6000 P.T.F.E. Lined Hose, -6 AN, 15 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -6 AN, 15 FT Roll, Stainless
    (Part #61761506)
    x
                

    The properties of P.T.F.E. make it a natural for all highly corrosive applications like automotive brake fluid.  P.T.F.E. also works well for hot oil and power steering fluid.  These hoses will take high pressure and cycle over and over without failure, and they also are easily suitable for use with nitrous oxide.

    P.T.F.E. powder is extruded into a smooth bore tube product.  The tube is then fed into a machine that weaves stainless wire into the familiar braided pattern.  The hose is inspected 100% and any flawed sections are discarded.

    • -6 AN
    • P.T.F.E. lined
    • .312" nominal inside diameter
    • Working pressure:  2,500 psi.
    • Burst pressure:  10,000 psi.
    • Minimum bend radius:  3" 
    • 15' roll of hose
  • Fragola        Series 6000 P.T.F.E. Lined Hose, -6 AN, 6 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -6 AN, 6 FT Roll, Stainless
    (Part #61766006)
    x
                

    The properties of P.T.F.E. make it a natural for all highly corrosive applications like automotive brake fluid.  P.T.F.E. also works well for hot oil and power steering fluid.  These hoses will take high pressure and cycle over and over without failure, and they also are easily suitable for use with nitrous oxide.

    P.T.F.E. powder is extruded into a smooth bore tube product.  The tube is then fed into a machine that weaves stainless wire into the familiar braided pattern.  The hose is inspected 100% and any flawed sections are discarded.

    • -6 AN
    • P.T.F.E. lined
    • .312" nominal inside diameter
    • Working pressure:  2,500 psi.
    • Burst pressure:  10,000 psi.
    • Minimum bend radius:  3" 
    • 6' roll of hose
  • Fragola        Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Stainless
    (Part #61762010)
    x
                

    The properties of P.T.F.E. make it a natural for all highly corrosive applications like automotive brake fluid.  P.T.F.E. also works well for hot oil and power steering fluid.  These hoses will take high pressure and cycle over and over without failure, and they also are easily suitable for use with nitrous oxide.

    P.T.F.E. powder is extruded into a smooth bore tube product.  The tube is then fed into a machine that weaves stainless wire into the familiar braided pattern.  The hose is inspected 100% and any flawed sections are discarded.

    • -10 AN
    • P.T.F.E. lined
    • .500" nominal inside diameter
    • Working pressure:  1,500 psi.
    • Burst pressure:  6,000 psi.
    • Minimum bend radius:  6.5" 
    • 20' roll of hose
  • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    (Part #6171513)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • AN8 Fitting Caps, 4/pk
    $4.99
    Product Rating: 5.00 Stars
    AN8 Fitting Caps, 4/pk
    (Part #54523805)
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • AN Fitting Plug, -6 AN
    $4.99
    AN Fitting Plug, -6 AN
    (Part #54523802)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    (Part #46852312)
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • AN Fitting Plug, -4 AN
    $4.99
    AN Fitting Plug, -4 AN
    (Part #54523800)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    (Part #91015762)
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1.625" to 2.125" O.D. hose.
            
  • Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    (Part #472981613)
    x
                

    These straight flare adaptors connect 3/4" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN to 3/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • 90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    (Part #6176080)
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 17