Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Fittings & Hose At Speedway Motors

Speedway Motors has hundreds of fuel and oil line fittings in stock and ready to ship! Plumb your open wheel race car with the same hose and fittings the big-name professional racers use like Jiffy-Tite and Fragola. We stock everything from anodized AN fittings to high-pressure stainless steel braided line.

Featured Products
Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
x
            

Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

Socketless Push-On Application Chart (GIF)

Socketless Push-On Assembly (GIF)

AN Thread Size Guide (GIF)

Fitting Thread Size Guide (GIF)

Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
x
            

Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
x
            

These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

  • AN to hose barb 
  • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
  • Use with Aeroquip Special Application blue hose
  • For use with 37° AN style fittings

Socketless Fitting Application Chart (GIF)

AN Thread Size Guide (GIF)

Fitting Thread Size Guide (GIF)

All-In-One Accessory Clamps
$14.99
All-In-One Accessory Clamps
x
            

These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

Hood pins and brackets sold separately.

"Open Wheel, Fittings and Hose" Page 1 of 4

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 45 Degree
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 45 Degree
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. 45° elbow -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Snap-In Grease Needle
    $7.99
    Product Rating: 1.00 Stars
    Snap-In Grease Needle
    x
                

    Inject grease into low profile grease zerks or hard to reach places with this adapter. Nipple snaps into your existing grease gun end.

     

  • Blue Straight AN6 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Blue Straight AN8 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    Blue Straight AN8 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/8" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -8 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Gates 32925 Power Grip Hose Clamp, 15/16 Inch - 1 1/16 Inch OD
    Gates 32925 Power Grip Hose Clamp, 15/16 Inch - 1 1/16 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 15/16" - 1-1/16" OD

    Instruction Sheet (PDF) 

  • Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • 90 Degree Flare Adaptor, AN3 to 1/8 Inch NPT
    90 Degree Flare Adaptor, AN3 to 1/8 Inch NPT
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • 90 Degree Flare Adaptor, AN6 to 1/4 Inch NPT
    90 Degree Flare Adaptor, AN6 to 1/4 Inch NPT
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Blue Straight AN8 Flare Adapter to 1/2 Inch Aluminum Pipe Fitting
    Blue Straight AN8 Flare Adapter to 1/2 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/2" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -8 AN to 1/2" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • AN 6 Fitting for Walbro GL392 Fuel Pump
    AN 6 Fitting for Walbro GL392 Fuel Pump
    x
                

    This blue anodized aluminum fitting is to be used with Walbro GL392 inline racing fuel pump (960-392).  It screws directly to one female threaded end of fuel pump to withstand 60 psi maximum pressure.

    • AN 6 Fitting
    • Walbro GL392 inline racing fuel pump application
    • Blue anodized aluminum
  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Blue Straight AN6 Flare Adapter to 1/8 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 1/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 1/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Quick Tight Hose Clamp, 3/4 - 1 Inch
    Quick Tight Hose Clamp, 3/4 - 1 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over .75" to 1.00" O.D. hose.
            
  • Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/4" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN to 3/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • 90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1" to 1.50" O.D. hose.
            
  • Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    x
                High Flow O-Ring Fitting, AN6 Hose, AN4 Port
            
  • Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 1/2" - 11/16" OD

    Instruction Sheet (PDF)

  • Steel 90 Degree Wing Cylinder Push-Lock Hose End Fitting
    Steel 90 Degree Wing Cylinder Push-Lock Hose End Fitting
    x
                Nickel-plated steel 90° elbow push-lock hose end fitting for 1/4" O.D. nylon tubing. 1/8" NPT male threads.
            
  • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    x
                
    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Jiffy-Tite 52412 Quick Connect Fluid Fittings, -12 AN Male Plug
    Jiffy-Tite 52412 Quick Connect Fluid Fittings, -12 AN Male Plug
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    x
                

    These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

    • AN to hose barb 
    • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
    • Use with Aeroquip Special Application blue hose
    • For use with 37° AN style fittings

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Jiffy-Tite 21802 Quick Disconnect Wing Fittings, 1/8 Inch NPT, Male
    Jiffy-Tite 21802 Quick Disconnect Wing Fittings, 1/8 Inch NPT, Male
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • Aluminum Tube Nut Couplers, -4 AN, 1/4 Inch, Black, Pack of 6
    Aluminum Tube Nut Couplers, -4 AN, 1/4 Inch, Black, Pack of 6
    x
                
    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.
    • 6 Pack 
  • Billet Nose Wing Post Tube Clamp, 1.250 Inch Tube
    Billet Nose Wing Post Tube Clamp, 1.250 Inch Tube
    x
                Machined to be aerodynamic - these tube clamps fit on your front torsion tubes for quick and easy adjustments or replacement.  Accept a 3/4" post, includes hardware. 
            
Goto Previous PagePrevious Page
1 2 3 4