Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Fittings & Hose At Speedway Motors

Speedway Motors has hundreds of fuel and oil line fittings in stock and ready to ship! Plumb your open wheel race car with the same hose and fittings the big-name professional racers use like Jiffy-Tite and Fragola. We stock everything from anodized AN fittings to high-pressure stainless steel braided line.

Featured Products
Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
(Part #1061243)
x
            

Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

Socketless Push-On Application Chart (GIF)

Socketless Push-On Assembly (GIF)

AN Thread Size Guide (GIF)

Fitting Thread Size Guide (GIF)

Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
(Part #91031820)
x
            

Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
(Part #47223)
x
            

These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

  • AN to hose barb 
  • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
  • Use with Aeroquip Special Application blue hose
  • For use with 37° AN style fittings

Socketless Fitting Application Chart (GIF)

AN Thread Size Guide (GIF)

Fitting Thread Size Guide (GIF)

All-In-One Accessory Clamps
$14.99
All-In-One Accessory Clamps
(Part #91032866)
x
            

These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

Hood pins and brackets sold separately.

"Open Wheel, Fittings and Hose" Page 1 of 8

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    (Part #91031820)
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    (Part #6174255)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • AN Fitting Plug, -8 AN
    $4.99
    AN Fitting Plug, -8 AN
    (Part #54523804)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Quick Tight Hose Clamp, 3/4 - 1 Inch
    Quick Tight Hose Clamp, 3/4 - 1 Inch
    (Part #91015760)
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over .75" to 1.00" O.D. hose.
            
  • AN16 Fitting Caps, 4/pk
    $5.99
    AN16 Fitting Caps, 4/pk
    (Part #54523811)
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    (Part #6177035)
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 8 male on one end; AN 8 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    (Part #1061440)
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Fragola        Series 6000 P.T.F.E. Lined Hose, -6 AN, 15 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -6 AN, 15 FT Roll, Stainless
    (Part #61761506)
    x
                Please view the product's page for more information
            
  • Fragola        Series 6000 P.T.F.E. Lined Hose, -6 AN, 6 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -6 AN, 6 FT Roll, Stainless
    (Part #61766006)
    x
                Please view the product's page for more information
            
  • Fragola        Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Stainless
    Fragola Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Stainless
    (Part #61762010)
    x
                Please view the product's page for more information
            
  • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    (Part #6171513)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • AN8 Fitting Caps, 4/pk
    $4.99
    Product Rating: 5.00 Stars
    AN8 Fitting Caps, 4/pk
    (Part #54523805)
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • AN Fitting Plug, -6 AN
    $4.99
    AN Fitting Plug, -6 AN
    (Part #54523802)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
    (Part #46852312)
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • AN Fitting Plug, -4 AN
    $4.99
    AN Fitting Plug, -4 AN
    (Part #54523800)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    (Part #91015762)
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1.625" to 2.125" O.D. hose.
            
  • Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    (Part #472981613)
    x
                

    These straight flare adaptors connect 3/4" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN to 3/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • 90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    90 Degree Flare Adaptor, AN4 to 1/8 Inch NPT
    (Part #6176080)
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    (Part #91015761)
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1" to 1.50" O.D. hose.
            
  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    (Part #6174242)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    (Part #1061242)
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    (Part #6177009)
    x
                High Flow O-Ring Fitting, AN6 Hose, AN4 Port
            
  • Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    (Part #39532915)
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 1/2" - 11/16" OD

    Instruction Sheet (PDF)

  • Aluminum Black Tube Nut Sleeve, -10 AN, 5/8 Inch
    Aluminum Black Tube Nut Sleeve, -10 AN, 5/8 Inch
    (Part #61760671)
    x
                
    These tube nut sleeves, when used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN
    Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN
    (Part #61768406)
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -6 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Fragola 209108 Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    New
    Fragola 209108 Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    (Part #6172918)
    x
                

    This blue 90 degree hose fitting adapter from Fragola allows you to connect a -6 AN hose to an -8 AN fitting. Fragola Performance Systems Series 8000 Push-Lite hose fittings are made from high quality material for performance and durability.

    • Aluminum Construction
    • 90 Degree
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet
    • Sold Individually
    • Blue

    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends

  • 90 Degree Flare Adaptor, AN8 to 1/2 Inch NPT
    90 Degree Flare Adaptor, AN8 to 1/2 Inch NPT
    (Part #6176087)
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    (Part #6174234)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    (Part #1061241)
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Jiffy-Tite 21506P Quick Disconnect Fluid Fittings, -6 AN Push Lock
    Jiffy-Tite 21506P Quick Disconnect Fluid Fittings, -6 AN Push Lock
    (Part #46821506P)
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    (Part #39532954)
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Steel 90 Degree Wing Cylinder Push-Lock Hose End Fitting
    Steel 90 Degree Wing Cylinder Push-Lock Hose End Fitting
    (Part #9401880)
    x
                Nickel-plated steel 90° elbow push-lock hose end fitting for 1/4" O.D. nylon tubing. 1/8" NPT male threads.
            
  • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    (Part #1061234)
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, Straight
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, Straight
    (Part #1061302)
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. Straight -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    • -6 AN female to push-on adapter
    • Straight style line hose end connector/coupler
    • Available in a Zinc plated finish

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Premium Black Synthetic Hose - AN6
    Premium Black Synthetic Hose - AN6
    (Part #620506)
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.095 lbs.
    • Minimum Bend Radius:  2.5 in.

    Works great as a fuel line for gasoline and alcohol fuels.

  • Fragola 209108BL Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    New
    Fragola 209108BL Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    (Part #61729181)
    x
                

    This black 90 degree hose fitting adapter from Fragola allows you to connect a -6 AN hose to an -8 AN fitting. Fragola Performance Systems Series 8000 Push-Lite hose fittings are made from high quality material for performance and durability.

    • Aluminum Construction
    • 90 Degree
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet
    • Sold Individually
    • Black
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends
  • Premium Black Synthetic Hose - AN4
    Premium Black Synthetic Hose - AN4
    (Part #620504)
    x
                

    This lightweight motorsports inspired hose has a rubber core, flexible braided nylon cover in a black color, and is resistant to oil, fuels, and coolants. Features a 500 psi working pressure and an operating range of -40° F to +300° F. Designed to be used with both crimp style and full flow type fittings. 

    • Vacuum Rating: 28 in. hg.
    • Weight Per Ft.: 0.075 lbs.
    • Minimum Bend Radius:  2.0 in.
  • ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    (Part #61760551)
    x
                
    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Jiffy-Tite 52412 Quick Connect Fluid Fittings, -12 AN Male Plug
    Jiffy-Tite 52412 Quick Connect Fluid Fittings, -12 AN Male Plug
    (Part #46852412)
    x
                

    Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

    Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

    See Application tab for intended use on each disconnect/plug.

    Jiffy-Tite Flow Specs (Link)

  • Black Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 3.00 Stars
    Black Push-On Hose, -8 AN
    (Part #620108)
    x
                

    AN8 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the hig end of the parameter, hose clamps shoudl be utilized.

    Hose Fitting Sizing Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8