Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Fasteners & Hardware At Speedway Motors

Speedway Motors is the sprint or midget racer's connection for high performance fasteners! Speedway can supply all your fastener needs, from nylock nuts and washers to rivets and complete Sprint car bolt kits featuring Speedway's exclusive Tru-Lite titanium bolts. Don't lose the open wheel race due to cheap fasteners! Use only the best from Speedway Motors.

Featured Products
Tru Rivets, 3/16 Inch Large Head
From: $9.99
Product Rating: 4.47 Stars
Tru Rivets, 3/16 Inch Large Head
x
            Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
        
Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
x
            

If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

  • 5/8 Inch-18 NF Fine Thread
  • Sold in bags of six nuts.
  • Choose left or right thread.
Large Head 3/16 Inch Exploding Rivets
Large Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Large head is 5/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

Small Head 3/16 Inch Exploding Rivets
Small Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Small head is 3/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

"Open Wheel, Fasteners and Hardware" Page 1 of 11

  • Speed Fast Aluminum SAE/Fine Lock Nut Kit
    Speed Fast Aluminum SAE/Fine Lock Nut Kit
    x
                This Aluminum Nylock Nut Kit contains 50 pieces. A variation of the nyloc nut, this features a fiber and nylon locking insert for the tightest hold. Nylocs are  designed to increase locking force and prevent the nut from coming  loose. 

    Several sizes of nylocks are available in this kit for your application. Comes with (10) 10-32, (10) 5/16"-24, (10) 3/8"-24, (10) 1/4"-28,  (10) 1/2"-20.
  • Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    x
                

    These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.

    • Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
    • Black Tie Wraps are UV resistant. Recommended for outdoor usage.
    • Metal Detectable
    • Temperature Ratings 185 F / 85 C.
    • UL Flame Rating 94V-2.
    • Minimum installation temperature is greater than 32 F or 0 C.
    • Made From Nylon 6/6.
    • Choose from lengths of 4", 5.5", 7.3", and 11.4"
    • 100 per Bag
  • AFCO 10138 Steel Jam Nut, 3/8-24 RH
    $0.78
    $0.99
    AFCO 10138 Steel Jam Nut, 3/8-24 RH
    x
                

    Steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

  • Speed Fast O-Ring Assortment Kit
    Speed Fast O-Ring Assortment Kit
    x
                
    • Wide selection of popular O-rings
    • 1/16" in. section to 1/4" in. O.D.
    • 1/8" in. section to 2-1/4" in. O.D.
    • R-01 thru R-32
    • 407 pieces
    •  Nitrile Rubber, Buna-N SAE Assortment
    • Suitable for many Hydrocarbons, Fats, Oils, Gas, etc...
    • Not Suitable for use with Brake Fluids
    • Good Abrasion Resistance and Resistant to Compression
    • High Tensile Strength
  • Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    x
                These medium Mag Daddy™ fasteners are designed to hold up to 10  unshielded Cat 5 Cables.  Rated at 16 lbs., these black fasteners  feature a magnetic bond for easy installation and removal without the  use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 5 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033243 Cable Daddy Information/Instructions (PDF) 

  • Steel 3/8 Inch AN6 Washers, 50 Pack
    Steel 3/8 Inch AN6 Washers, 50 Pack
    x
                Steel 3/8" AN Washers, 50 Pack
            
  • Pop Rivet 151 Piece Kit
    $15.99
    Pop Rivet 151 Piece Kit
    x
                151 piece kit comes with 1/8" and 3/16" pop rivets with steel head and steel mandrel, and aluminum head with steel mandrel. Or aluminum head with aluminum mandrel. 

    Also comes with an assortment of backing washers as well as the large headed 3/16" style. All packed into a convenient storage case.

  • AFCO 10141 Steel Jam Nut, 3/4-16 LH
    $1.35
    $1.99
    AFCO 10141 Steel Jam Nut, 3/4-16 LH
    x
                

    Steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • TI64 222 Titanium Micro Sprint Bullet Nose Stop Adjuster Bolt Kit
    TI64 222 Titanium Micro Sprint Bullet Nose Stop Adjuster Bolt Kit
    x
                These bullet nose stop adjusters for Micro Sprint cars are constructed of titanium for long lasting durability.  They come in a set of 4 bolts with 5/16"-18 x 1-3/4" threads.
    • Bullet Nose Stop Adjuster
    • Set of 4
    • 5/16"-18 x 1-3/4"
  • Mag Daddy 1/2 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 5-Pack
    Mag Daddy 1/2 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 5-Pack
    x
                Mag Daddy Cable-Daddy™ fasteners are designed to  easily secure all wires and cables in a variety of environments. These  magnetic fasteners adhere to most all metal surfaces with an absurd 23  lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best  solution to wire and cable management. They're offered in a choice of  three sizes to meet your requirements. Whether you need to hold a brake  line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™  fasteners are the perfect fix.
    • Black rectangular cable hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 18.5mm
    • Holds up to 20 unshielded Cat 5 Cables
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Ability to Rotate 360°
    • Re-usability
    • Take in and out wires
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062423 Cable Daddy Information/Instructions (PDF)

  • Plastic Large Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    Plastic Large Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    x
                
    1/4 turn panel fasteners that have an extra large 1-1/8" diameter head with a 1/2" grip. These quarter turn fasteners are available in black, blue, grey, purple, red, white and yellow.
    • Extra large 1-1/8" diameter head
    • .500" grip
    • Available in Black, Blue, Grey, Purple, Red, White, or Yellow
    • Pack of 10

    Measurement Guide (Link)

  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • DMI RRC-1620 XR-1 Bulldog Rearend Stub Shaft Snap Ring
    DMI RRC-1620 XR-1 Bulldog Rearend Stub Shaft Snap Ring
    x
                

    Manufactured with the highest quality castings, bearings, and gears these rearend parts have proven reliability.

    Stub Shaft Snap Ring

  • Tru-Lite Titanium Torque Tube Stud, 3/8 Inch-16-24 x 1.25
    Tru-Lite Titanium Torque Tube Stud, 3/8 Inch-16-24 x 1.25
    x
                

    These titanium studs are fine on one end and coarse on the other.

    • 3/8" x 1.25.
    • Titanium standard.

     

  • Tru-Lite Fine Thread Titanium Bolt, 3/8-24 x 1.500 Inch
    Tru-Lite Fine Thread Titanium Bolt, 3/8-24 x 1.500 Inch
    x
                

    3/8"-24 with 9/16" Hex Head

    These fine thread titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight.

  • Tru-Lite Titanium Bolt, 1/2-20 Fine Thread, 1.400 Inch Long, 3/4 Inch Hex Head
    Tru-Lite Titanium Bolt, 1/2-20 Fine Thread, 1.400 Inch Long, 3/4 Inch Hex Head
    x
                

    These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Fine thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 1/2"-20 x 1.400"
    • 3/4" Hex Head
    • Application: radius rod to birdcage
  • Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    x
                Steel fine thread jam nuts for use with rod ends, heim joints, and clevis. Each has a small 3/4" O.D. for added clearance. Sold in bags of six nuts. Available with left or right thread.
            
  • DMI RRC-1110 XR-1 Bulldog Rearend Side Bell Stud
    DMI RRC-1110 XR-1 Bulldog Rearend Side Bell Stud
    x
                

    Manufactured with the highest quality castings, bearings, and gears these rearend parts have proven reliability.

    Side Bell Stud

  • AFCO 80745 Twister Pliers
    $49.99
    $50.99
    AFCO 80745 Twister Pliers
    x
                
    • Utilizes end bearing for faster, smoother twisting
    • Great for use in small areas where a second pull is required
  • Tru-Lite Titanium Bolts, 5/16-18 Coarse Thread, 1/2 Inch Long, 1/2 Inch Hex Head
    Tru-Lite Titanium Bolts, 5/16-18 Coarse Thread, 1/2 Inch Long, 1/2 Inch Hex Head
    x
                

    These coarse thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-18 x 1/2"
    • 1/2" Hex Head
    • Application: steering wheel bolt
  • Tru-Lite Titanium Thru-Bolt Style Bolt Kit, Eagle Chassis
    Tru-Lite Titanium Thru-Bolt Style Bolt Kit, Eagle Chassis
    x
                Through-bolt style bolt kit complete with 138 titanium bolts and aluminum and steel nylocks/washers. For Eagle Sprint Car chassis.
            
  • M&W WSW-1 Wing Cylinder Wiper
    M&W WSW-1 Wing Cylinder Wiper
    x
                This fits our wing cylinders # 546358 (any length) and helps keep dirt and debris from destroying the seal in the cylinder.
  • AFCO 7242-0040 F33i Series .810 Inch Caliper Cotter Pin
    AFCO 7242-0040 F33i Series .810 Inch Caliper Cotter Pin
    x
                

    Service Parts for US Brake F33i Series Calipers

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

     

  • Tru-Lite Titanium Wheel Bolt, 5/16-24 Thread, 1-1/2 Inch Long, 1/2 Hex Head
    Tru-Lite Titanium Wheel Bolt, 5/16-24 Thread, 1-1/2 Inch Long, 1/2 Hex Head
    x
                

    These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Fine thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-24 x 1-1/2"
    • 1/2" Hex Head
    • Application: top/front wing, wing straps  
  • Steel Dome Head Quarter Turn Fasteners
    Steel Dome Head Quarter Turn Fasteners
    x
                
    These 1/4 turn panel fasteners feature no slip installation and removal with their all the way through 3/16" hex hole. These panel fasteners can be installed and removed using a standard 3/16" allen wrench.
    • 1/4 turn
    • No more slipping and gouging paint or graphics
    • 3/16" hex hole allows for positive, no-slip installation and removal
    • Can be used with a standard 3/16" Allen wrench
    • Hex hole goes all the way through, it's impossible to get plugged with dirt, and is lighter than other fasteners
  • Titanium Stop Bolt Kit
    $39.99
    Titanium Stop Bolt Kit
    x
                Titanium stop bolt kit.
            
  • Steel Hex Jam Nut, 1-1/8 Inch, Zinc Plated
    Steel Hex Jam Nut, 1-1/8 Inch, Zinc Plated
    x
                These grade A jam nuts are often used to lock or  "jam" something in place without clamping against another object. Jam  Nuts are typically low profile compared to a standard nut.  Zinc  plating, retards the corrosion rate in a normal atmosphere.
    • Steel
    • 1-1/8" Diameter
    • 7 RH coarse thread
    • .609 thick
    • Zinc finish
    • 1-11/16" wrench size
    • Specification: ANSI B18.2.2
  • 12 Point 5/16 Inch-24 Flange Flare Nuts, Headers, Torque Tube, 10 Pack
    12 Point 5/16 Inch-24 Flange Flare Nuts, Headers, Torque Tube, 10 Pack
    x
                

    This package of 10 block oxide flanged nuts feature a size of 5/16"-24 with RH thread. They are made of steel with a black oxide finish.

    • Set of 10
    • Flanged nuts
    • 5/16"-24 with RH thread
    • Steel with a black oxide finish
  • Cotter Pin Assortment Kit
    $15.99
    Cotter Pin Assortment Kit
    x
                200 pieces. Steel. Assorted size. 
            
  • Swindell Series by Ti64 Complete Spike Chassis Ti Bolt Kit
    Swindell Series by Ti64 Complete Spike Chassis Ti Bolt Kit
    x
                Please view the product's page for more information
            
  • Aluminum Jam Nuts, 3/8-24 RH, Pack/6
    Aluminum Jam Nuts, 3/8-24 RH, Pack/6
    x
                

    These jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.

    Sold in package of six.

  • Micro Sprint 7/16 Inch Fine Thread Jet Nut
    Micro Sprint 7/16 Inch Fine Thread Jet Nut
    x
                

    These fine thread, super lightweight jet nuts have many uses. Self locking jet nuts feature built-in washers and reduced hex heads.

    • Steel construction
    • Micro/Mini Sprint hardware
    • Sold each
  • Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 5/16-24 Thread
    • 3/8" hex
    • Pack of 12
  • Tru-Lite Titanium Bolt, 1/2-20 Fine Thread, 2 Inch Long, 3/4 Inch Hex Head
    Tru-Lite Titanium Bolt, 1/2-20 Fine Thread, 2 Inch Long, 3/4 Inch Hex Head
    x
                

    These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Fine thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 1/2"-20 x 2"
    • 3/4" Hex Head
    • Application: tie rod steering arm
  • Wing Tool Tray with Legs
    $49.99
    Product Rating: 5.00 Stars
    Wing Tool Tray with Legs
    x
                Trick aluminum tray (12" wide x 18" long x 3" high) with legs for use with sprint car nose wing. Complete with provisions for spark plug and/or injector nozzle storage. 
            
  • Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 1/4-28 Thread
    • 3/8" hex
    • Pack of 12
  • HRP HRP6997 Mule Axle Rack Combo
    HRP HRP6997 Mule Axle Rack Combo
    x
                
    • Each set comes with 4 tube clamps
    • Mounts on front of mule, adjustable and easily removed
    • Aluminum construction
    • Powdercoated black
    • Set contains 2 brackets
  • Steel 1/2 Inch AN8 Washers, 50 Pack
    Steel 1/2 Inch AN8 Washers, 50 Pack
    x
                
    Steel 1/2" AN Washers, 50 Pack
  • Super Buttons Aluminum Dome Head Quarter Turn Fasteners, 10/Pack
    Super Buttons Aluminum Dome Head Quarter Turn Fasteners, 10/Pack
    x
                
    These 1/4 turn panel fasteners feature no-slip installation and removal with their 3/16" hex hole. A 3/16" allen wrench or full-bore super button key is required for installation or removal. Hex hole will not fill with dirt as it goes all the way through.
    • 1/4 turn
    • No more slipping and gouging paint or graphics
    • 3/16" hex hole allows for positive, no-slip installation and removal
    • Can be used with a standard 3/16" Allen wrench or with the Full-Bore Super Button key
    • Hex hole goes all the way through, it's impossible to get plugged with dirt, and is lighter than other fasteners
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11