Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Headers & Exhaust At Speedway Motors

Speedway Motors stocks all the best low-restriction open wheel racing headers for Sprint and Midget chassis! We also have a great selection of header kits, collectors and tubing so you can repair your damaged headers or fabricate a custom set for your open wheel racing application.

Featured Products
Combo Exhaust Bend, 1-1/2 Inch
Combo Exhaust Bend, 1-1/2 Inch
x
            
Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-1/2" O.D.
Speedway Auger Style Muffler
$14.99
Product Rating: 4.75 Stars
Speedway Auger Style Muffler
x
            Auger style muffler fits 3" or 3-1/2" diameter pipe.  11" long. Baffle style. Slips inside.       
        
Assorted Exhaust Bends, 1-3/4 Inch
Assorted Exhaust Bends, 1-3/4 Inch
x
            Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
        
Combo Exhaust Bend, 2 Inch
$14.99
Product Rating: 4.87 Stars
Combo Exhaust Bend, 2 Inch
x
            Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 2" O.D.
        

"Open Wheel, Exhaust" Page 1 of 17

  • Header Collector, 1 3/4 Inch Primaries
    Header Collector, 1 3/4 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-3/4" tube size. 
            
  • Combo Exhaust Bend, 2 Inch
    $14.99
    Product Rating: 4.87 Stars
    Combo Exhaust Bend, 2 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 2" O.D.
            
  • Mild Steel Exhaust U-Bend, 2 Inch
    Mild Steel Exhaust U-Bend, 2 Inch
    x
                

    16-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Speedway Spark Plug Guard
    $4.99
    Speedway Spark Plug Guard
    x
                
    • Clamps to header tube to protect plugs and wires from flying debis
    • Fits standard tube headers
    • Bend to fit as necessary
  • Speedway Auger Style Muffler
    $14.99
    Product Rating: 4.75 Stars
    Speedway Auger Style Muffler
    x
                Auger style muffler fits 3" or 3-1/2" diameter pipe.  11" long. Baffle style. Slips inside.       
            
  • Dynatech   794-00320 U-Tab Kit - 8 Tabs, 4 Bolts
    Dynatech 794-00320 U-Tab Kit - 8 Tabs, 4 Bolts
    x
                

    Weld tabs to headers, collectors, or mufflers and fasten together with the provided bolt. Provides a quick, secure connection. These are the same U-tabs Dynatech® uses on all their headers and collectors.

    Kit includes U-tabs and hardware.

  • Dynatech   Header Bolts, M8 x 1.25 mm, Pack/16
    Dynatech Header Bolts, M8 x 1.25 mm, Pack/16
    x
                

    Dynatech® has a wide variety of metric header bolts to fit your heads.

  • Kickout Pipes, 3-1/2 x 7 Inch
    Kickout Pipes, 3-1/2 x 7 Inch
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Combo Exhaust Bend, 2-1/2 Inch Diameter
    Combo Exhaust Bend, 2-1/2 Inch Diameter
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Boom Tube Small Block Chevy Zoomie Headers for Sprints, Plain
    Boom Tube Small Block Chevy Zoomie Headers for Sprints, Plain
    x
                

    Zoomie style headers with extra-thick flanges and 1-3/4" primaries. Ready to bolt on and go. Will not fit wide cars. Fits Standard port S/B Chevy heads only.

  • Combo Exhaust Bend, 1-3/4 Inch
    Combo Exhaust Bend, 1-3/4 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-3/4" O.D.
  • Header Bolts, 3/8-16 x 1 Inch, Set/12
    Header Bolts, 3/8-16 x 1 Inch, Set/12
    x
                

    Standard bolts for headers for most makes of heads. Heat treated steel.

  • Combo Exhaust Bend, 1-1/2 Inch
    Combo Exhaust Bend, 1-1/2 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-1/2" O.D.
  • Yamaha R6 Exhaust Gaskets - 99-05 S Model
    Yamaha R6 Exhaust Gaskets - 99-05 S Model
    x
                
    • OEM Yamaha replacements
    • Copper material         
    • 99-05 S model               
  • Schoenfeld Headers 01511 Small Block Chevy D-Port Header Gaskets
    Schoenfeld Headers 01511 Small Block Chevy D-Port Header Gaskets
    x
                

    Schoenfeld header gaskets for Small Block Chevy 265-400 V-8 with D-port cylinder heads.

  • Speedway Shorty Race Mufflers, 8 x 3 Inch
    Speedway Shorty Race Mufflers, 8 x 3 Inch
    x
                These shorty race mufflers are useful when the rules say you must run a muffler, but do not specify a noise level. All steel construction with no fillers to burn out.
            
  • Mild Steel Exhaust U-Bend, 2-1/2 Inch
    Mild Steel Exhaust U-Bend, 2-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Speedway Shorty Race Mufflers, 8 x 3-1/2 Inch
    Speedway Shorty Race Mufflers, 8 x 3-1/2 Inch
    x
                These shorty race mufflers are useful when the rules say you must run a muffler, but do not specify a noise level. All steel construction with no fillers to burn out.
            
  • Small Block Chevy Header Kit, 1-7/8 Standard Port, 3-1/2 Collector
    Small Block Chevy Header Kit, 1-7/8 Standard Port, 3-1/2 Collector
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiasts, this kit will require some cutting, fitting and welding.

    • Thick 1/4" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flange to the bend
  • Small Block Chevy Copper Exhaust Gaskets, Square Port
    Small Block Chevy Copper Exhaust Gaskets, Square Port
    x
                

    Copper exhaust gaskets are die cut and dead soft. Embossed port ridge for a perfect seal. Cure the "leaky header blues" with these copper exhaust gaskets. Constructed of the finest .041 copper material and will seal where most gaskets fail. Reusable.

    • 1-3/8" x 1-3/8"
    • Can be trimmed to as large as 1.5" x 1.5"
  • Header Collector, 2 Inch Primaries
    Header Collector, 2 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 2" tube size. 
            
  • Combo Exhaust Bend, 1-5/8 Inch
    Combo Exhaust Bend, 1-5/8 Inch
    x
                Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-5/8" O.D.
            
  • Small Block Chevy Copper Exhaust Gasket, Round Port
    Small Block Chevy Copper Exhaust Gasket, Round Port
    x
                

    Cure the "leaky header blues" with these copper exhaust gaskets for round port Small Block Chevy heads. These copper exhaust gaskets are die cut and dead soft. Embossed port ridge for a perfect seal. Constructed of the finest .041" copper material and will seal where most gaskets fail. Reusable.

  • Combo Exhaust Bend, 1-7/8 Inch
    Combo Exhaust Bend, 1-7/8 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 1-7/8" O.D.
            
  • Header Collector, 1 5/8 Inch Primaries
    Header Collector, 1 5/8 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-5/8" tube size.
            
  • Mild Steel Exhaust U-Bend, 1-1/2 Inch
    Mild Steel Exhaust U-Bend, 1-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    3" Bend Radius 

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 1-3/4 Inch
    Mild Steel Exhaust U-Bend, 1-3/4 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Elbow, 90 Degree, 3 Inch O.D.
    Exhaust Elbow, 90 Degree, 3 Inch O.D.
    x
                

    3" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

  • Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, this kit will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
    • 1-5/8” primary tubes
    • 3” collectors
  • Header Bolts, 3/8-16 x 3/4 Inch, Set/12
    Header Bolts, 3/8-16 x 3/4 Inch, Set/12
    x
                

    Standard bolts for headers for most makes of heads. Heat treated steel.

  • SuperSeal Small Block Chevy Square Port Exhaust Gaskets
    SuperSeal Small Block Chevy Square Port Exhaust Gaskets
    x
                SuperSeal offers premium quality components & materials and exceeds all sealing requirements established by gasket manufacturers. For Small Block Chevy stock style square port heads.
            
  • Mild Steel Exhaust U-Bend, 1-5/8 Inch
    Mild Steel Exhaust U-Bend, 1-5/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    x
                

    3-1/2" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

    • 3.5" O.D.
    • 90 degree angle
    • 4" center line
    • A length: 5 1/4"
    • B length: 2 3/4"
  • Mild Steel Exhaust U-Bend, 1-7/8 Inch
    Mild Steel Exhaust U-Bend, 1-7/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Header Collector, 1 7/8 Inch Primaries
    Header Collector, 1 7/8 Inch Primaries
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-7/8" tube size.
            
  • Fel-Pro Gaskets 1404 Small Block Chevy Square Port Exhaust Header Gaskets
    Fel-Pro Gaskets 1404 Small Block Chevy Square Port Exhaust Header Gaskets
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy exhaust gaskets for headers.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 17