Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 15

Products

Exhaust Headers

Shop Open Wheel Headers & Exhaust At Speedway Motors

Speedway Motors stocks all the best low-restriction open wheel racing headers for Sprint and Midget chassis! We also have a great selection of header kits, collectors and tubing so you can repair your damaged headers or fabricate a custom set for your open wheel racing application.

Featured Products
  • Boom Tube Small Block Chevy Zoomie Headers for Sprints, Painted Black
    Boom Tube Small Block Chevy Zoomie Headers for Sprints, Painted Black
    (Part #9301700)
    x
                

    Zoomie style headers with extra-thick flanges and 1-3/4" primaries. Ready to bolt on and go. Will not fit wide cars. Fits Standard port S/B Chevy heads only.

  • Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    Small Block Chevy Header Kit, 1-5/8 Standard Port, 3 Collector
    (Part #930SK158)
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, weld up headers will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
    • 1-5/8” primary tubes
    • 3” collectors
  • Dynatech   90-00100B Stealth Black Ceramic Coating Option, Header Set
    Dynatech 90-00100B Stealth Black Ceramic Coating Option, Header Set
    (Part #3119000100B)
    x
                

    Great option for increasing the life, horsepower and appearance of your new Dynatech® headers! All headers purchased with this option are coated inside and outside. The coating will significantly reduce the underhood temperature of your car, which translates into a small horsepower gain, not to mention it it makes those headers look great! 

    Note: This option can only be ordered in conjunction with Factory Shipped Dynatech® products. 

  • Header Collector, 1 3/4 Inch Primaries
    Header Collector, 1 3/4 Inch Primaries
    (Part #91013837)
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-3/4" tube size. 
            
  • Dynatech Modified 604 Crate Engine Headers, 1 Inch Triple-Step Long Tube
    New
    Dynatech Modified 604 Crate Engine Headers, 1 Inch Triple-Step Long Tube
    (Part #31170117310)
    x
                

    These modified stainless steel race headers are engineered for use with 604 Crate Engines. These headers are specially designed for Shaw, Hoffman, and Dirtworks chassis.

    Shaw, Hoffman, and Dirtworks chassis.
    • 1" Raised
    • Shaw, Hoffman, and Dirtworks chassis
    • Stainless Steel for increased header life
    • TIG Welded
    • Triple-step long tube design
    • 9" long  collector
    • 3" collector outlet diameter
    • Gaskets and bolts inclduded
    • Raised and offset engine positions
    • Laser cut flanges with 604 crate port design 
    • 44.211 lbs.
    • 40"x21"x16"

    Header Dimension Chart

  • Dynatech   790-00100 Ceramic Coating Option for Headers
    Dynatech 790-00100 Ceramic Coating Option for Headers
    (Part #31179000100)
    x
                

    Great option for increasing the life, horsepower and appearance of your new Dynatech®s. All headers purchased with this option are coated inside and outside. The coating will significantly reduce the underhood temperature of your car - which translates into a small horsepower gain, not to mention it it makes those headers look great! Headers purchased with this ceramic coating come with a lifetime rust-through warranty and a customer satisfaction guarantee.

    Note: This option can only be ordered in conjunction with Factory Shipped Dynatech® products. 

  • Schoenfeld Standard Sprint Car Headers, 1-3/4, 3-1/2 Cltr, Chevy
    Schoenfeld Standard Sprint Car Headers, 1-3/4, 3-1/2 Cltr, Chevy
    (Part #9171014L)
    x
                

    Track proven for S/B Chevy.  Extra thick flanges. Headers feature 3-1/2" from flange to bend and approximately 32" primary tubes. Bolt directly to aluminum standard port heads.

    Header Dimension Chart 

    Complete with gaskets and bolts.

  • Small Block Chevy Header Kit, 1-3/4 Standard Port, 3 Collector
    Small Block Chevy Header Kit, 1-3/4 Standard Port, 3 Collector
    (Part #41865600)
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, weld up headers will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest tube flange to bend
    • 5" length from shortest tube flange to the bend

Filter

"Open Wheel, Exhaust Headers" Page 1 of 15

Page 1 of 15

  • Dynatech   790-00100 Ceramic Coating Option for Headers
    Dynatech 790-00100 Ceramic Coating Option for Headers
    (Part #31179000100)
    x
                

    Great option for increasing the life, horsepower and appearance of your new Dynatech®s. All headers purchased with this option are coated inside and outside. The coating will significantly reduce the underhood temperature of your car - which translates into a small horsepower gain, not to mention it it makes those headers look great! Headers purchased with this ceramic coating come with a lifetime rust-through warranty and a customer satisfaction guarantee.

    Note: This option can only be ordered in conjunction with Factory Shipped Dynatech® products. 

  • Dynatech Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    Dynatech Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    (Part #31178360835)
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Dynatech Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    (Part #31178381241)
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port 3-1/2 Collector
    Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port 3-1/2 Collector
    (Part #41865620)
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, weld up headers will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
  • Dynatech   Stainless Steel Merge Collector, 2 In. Slip Over, 3-1/2 In. Outlet
    Dynatech Stainless Steel Merge Collector, 2 In. Slip Over, 3-1/2 In. Outlet
    (Part #3118000506)
    x
                

    Dynatech® merge collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it and go" part. In order to realize the full potential of this collector disign, dyno testing is recommended. (See Notes tab)

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower

    Note: 9:1 applications must use stainless (not mild steel) merge collectors for best performance and durability.

  • Dynatech 780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    Dynatech 780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    (Part #31178010516)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech   780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    Dynatech 780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    (Part #31178010514)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech   780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    Dynatech 780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    (Part #31178011516)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech 780-02518 Plain Steel Merge Collector, 2-1/4 x 4 Inch
    Dynatech 780-02518 Plain Steel Merge Collector, 2-1/4 x 4 Inch
    (Part #31178002518)
    x
                

    Dynatech® Mild Steel Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Formed long transition 4-into-1 design for maximum power
    • Jig-located U-tabs at 180 degrees for bolt-on mounting
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    (Part #9300114S)
    x
                

    Many rodders are looking to install Chevy’s powerful and efficient LS1 / LS6 Small Block V8 in their street rods, customs and classic trucks. These shorty headers can make those installations easier in a variety of applications, and help produce more power as well.

    An oxygen sensor bung is included with these block hugger headers, but not installed, for those who want to keep the engine’s electronic fuel injection. Includes bolts, gaskets, and reducers.

    LS1 Header Dimensions (GIF)

  • Dynatech Ceramic Coated Slip-On Collector, 2 x 3-1/2 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2 x 3-1/2 x 12 Inch
    (Part #31178351236)
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Header Collector, 1 3/4 Inch Primaries
    Header Collector, 1 3/4 Inch Primaries
    (Part #91013837)
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-3/4" tube size. 
            
  • Dynatech 780-14510 Ceramic Coated Merge Collector, 2-1/2 x 5 Inch
    Dynatech 780-14510 Ceramic Coated Merge Collector, 2-1/2 x 5 Inch
    (Part #31178014510)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech 783-21230 Plain Steel Slip-On Collector, 1-5/8 x 3 x 12 Inch
    Dynatech 783-21230 Plain Steel Slip-On Collector, 1-5/8 x 3 x 12 Inch
    (Part #31178321230)
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Schoenfeld Swept Forward Sprint Headers, 2 In, 3-1/2 Cltr, Spread Port
    Schoenfeld Swept Forward Sprint Headers, 2 In, 3-1/2 Cltr, Spread Port
    (Part #9171026LDN)
    x
                

    Swept forward for muffler clearance. Fits Chevy, Brodix Spread Port and now all Pro Spread Port pattern heads. Laser cut flanges to clear down nozzles. Headers welded to clear 4" from head to inside tube. Approximately 32" 18 ga. primary tubes and 3-1/2" x 14" collectors, may be shortened. Bolts directly to your head and comes with bolts and gaskets.

    Header Dimension Chart

  • Schoenfeld Std Sprint Car Headers, 1-3/4 to 1-7/8, 3-1/2 Cltr
    Schoenfeld Std Sprint Car Headers, 1-3/4 to 1-7/8, 3-1/2 Cltr
    (Part #9171014LVSP)
    x
                Track proven for S/B Chevy.  Extra thick flanges. Headers feature 3-1/2" from flange to bend and approximately 32" primary tubes. Bolt directly to aluminum spread port heads.

    Complete with gaskets and bolts. Available with 1-3/4", 1-7/8", or 2" primary tubes.

    Header Dimension Chart

  • Schoenfeld Std Sprint Car Headers, 1-7/8 To 2, 3-1/2 Cltr, Chevy
    Schoenfeld Std Sprint Car Headers, 1-7/8 To 2, 3-1/2 Cltr, Chevy
    (Part #9171015LV)
    x
                Track proven for S/B Chevy.  Extra thick flanges. Headers feature 3-1/2" from flange to bend and approximately 32" primary tubes. Bolt directly to aluminum standard port heads.

    Complete with gaskets and bolts. Available with 1-3/4", 1-7/8", or 2" primary tubes.

    Header Dimension Chart

  • Schoenfeld Straight Tube Sprint Car Headers, 2 Inch, All Pro Head
    Schoenfeld Straight Tube Sprint Car Headers, 2 Inch, All Pro Head
    (Part #9171056LAP)
    x
                

    Over 200 degrees of bends removed for increased flow and 8-10 hp increase. Fits standard Chevy, Brodix spread port and now all pro spread port pattern heads. Laser cut flanges to clear down nozzles. Headers welded to clear 4" from head to inside tube. Approximately 32" 18-gauge primary tubes and 3-1/2" collectors. Comes with bolts and gaskets. 

    Header Dimension Chart

  • Schoenfeld Straight Tube Sprint Headers, 2 In., All Pro Head, 16 In
    Schoenfeld Straight Tube Sprint Headers, 2 In., All Pro Head, 16 In
    (Part #9171056LAP.16)
    x
                

    These straight tube sprint car headers from Schoenfeld feature an extra long 16 inch collector and come complete with all necessary bolts and gaskets.

    Header Dimension Chart 

    • Over 200 degrees of bends removed for increased flow and 8-10 hp increase.
    • Fits standard Chevy, Brodix spread port and now all pro spread port pattern heads.
    • Laser cut flanges to clear down nozzles.
    • Headers welded to clear 4" from head to inside tube.
    • Approximately 32" 18-gauge primary tubes and 3-1/2" collectors. 
    • Extra long 16 inch collector
    • Comes with bolts and gaskets.
  • Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 4 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 4 x 12 Inch
    (Part #31178361241)
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
Goto Previous PagePrevious Page
1 2 3 4 5 ... 15