Speedway Motors is the open wheel racing engine authority! Whether you have a 360, 410, USAC or Outlaw series Chevy race engine, Speedway has every part Sprint and Midget racers need. Our large assortment of cylinder heads, camshafts and racing valve train components allows you to tailor your engine for any racing condition. Speedway also has a variety of durable forged rotating assemblies, dry sump oiling systems and Dart engine blocks that can survive the rigors of open wheel racing. Race and win with Speedway Motors!
Fel Pro Performance V8 gasket set for 1955-79 S/B Chevy with left hand dipstick. Fits 283, 302, 307, 327, and 350 with stock or small intake and exhaust ports (excluding most aluminum blocks).
- #1003 Head Gaskets
- pre-flattened steel wire ring
- 4.166" gasket bore
- 0.041" nominal compression thickness
- 9.1 cc compressed volume
- Intake Gaskets
- 1.23" x 1.99" port size
- .060" thickness
- Header Gaskets have 1.38" x 1.38" ports
The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.
1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).
- Comp Height 6.0" Rod: 1.250
- Pin Diameter: 0.927
- Clearance Guide
- *Meas. = 0.500
- Min = 0.0025
- Max = 0.0033
*The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465
Made from C1010 material and heat treated. Has 25% more column strength than stock pushrods. Black finish, 5/16" diameter and .075" wall with drilled, welded balls. Can be used with guide plates. Use for spring pressures up to 400 lbs.
Available in stock length (7.794"), .100" longer (7.894") and .150" longer (7.944"). Set of 16.
Not only are these valve covers lightweight, they look cool! Hand fabricated and TIG welded, these aluminum valve covers have baffled breather tubes in one cover for racing use. Use with 1-3/8" breathers. Includes hold down bolts. Gaskets not included.
- Flange Thickness: 1/8"
- Bolts: 1/4"-20 x 3-1/2"
- Can be painted, polished, or left in bare aluminum finish.
Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.
"Open Wheel, Engine" Page 1 of 25
$3.99More InfoMagnetic Drain Plugx
Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!
Will fit any oil pan with 1/2-20 threads.
$49.99More InfoMagnetic Engine Heaterx
This 200 Watt engine oil/block heater features a magnetic base. 110 volt, 5 foot cord.
$14.99More InfoKing Racing Products 2176 Oil Pressure Gauge Fitting Only, -4 ANx
-4 AN oil pressure fitting.
$29.99More InfoJ&J Auto Racing 101014SK Rear Shims for Motorx
These shims fit between the rear motor plate and chassis. This raises or lowers the front of the engine one degree depending on which direction you install the shims.
Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Borex
These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.
- Gaskets are sold each
- Pre-flattened steel wire
- Nominal compression thickness: .041"
- Compressed volume: 9.1 cc
- 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
- When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.
Head Gasket Application (JPEG)
$5.99More InfoARP Fasteners 230-7001 Small Block Chevy Oil Pump Studsx
For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
$29.99More InfoSmall Block Chevy High-Volume Oil Pump, 5/8 Pickupx
Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.
$9.99More InfoSuperSeal Rear Cover Gasket for Halibrand Quick Changex
Our paper gaskets provide a great quality seal at a very low price. These gaskets are for popular Halibrand quickchange rear axles.
$17.99More InfoWinters Performance 5290-01 Large Inspection Plugx
If you have ever removed the original plugs in a Winters Pro Eliminator rear end, you know how hard they are to get a wrench on. These billet aluminum plugs replace the fill and drain plugs and accept a 9/16" socket.
$6.99More InfoSpeedway Small Block Chevy Crankshaft Wiperx
Removes excess oil from the crankshaft to improve top end horsepower and reduce windage. Fits Small Block Chevy. Mounts to the starter side of the block.
Slight trimming may be required. For best results, trim to within .045" of the rods and counterweights.
$54.99More InfoSpeedway Small Block Chevy Main Cap Studs, Set of 5x
Stock extended style main cap studs. Used to mount windage trays. Small Block Chevy. Set of 5.
$4.99More InfoSmall Block Chevy Main Cap Bafflex
Keeps sump oil from reaching crankshaft. Mounts between pump and main cap. Requires trimming.
$21.99More InfoSmall Block Chevy Oil Pan Stud Kitx
The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
$29.99More InfoManley 42171 Small Block Chevy Head Boltsx
Heavy duty design, longer than stock, for use with head bolt washers.
- 180,000 PSI material
- Longer than stock for use with washers
- Improved wrenchability with 1/2" hex head
Order one set per head (two sets required per motor). Washers sold separately.
$59.99More InfoMain Bearing Spacers - Small Block Chevy, 350 Crankx
Put a 350 crank in a 400 block. Simply snap in and install regular 350 main bearings. Reusable.
Spacer bearing makes up for difference in crank journal diameters.
$32.99More InfoEngineQuest AT350 Small Block Chevy Rear Main Alignment Toolx
Small block Chevy rear main alignment tool
$259.99More InfoSmall Block Chevy 4340 Steel H-Beam Rods, Bushed Pinx
Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.
Weight matched sets of 8. Available in 5.7" or 6.0" lengths.
$24.99More InfoSmall Block Chevy Windage Tray, Plain Steelx
Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install. Fits 2 or 4 bolt main blocks.
$3.99More InfoCamshaft Lockplate and Bolt Kitx
Camshaft lock plate with three grade 8 cam bolts. V8 and V6 Chevy.
Bolts are 5/16-18 X 7/8 USS Course Grade 8
From: $5.99More InfoValve Cover Hold Down Clampsx
Set of eight for small block Chevy hold down clamps. Available in Zinc or Chrome and are 5" long overall.
$19.99More InfoBraided Pressure Gauge Line Kitx
This braided pressure gauge line kit makes it a snap to hook up your pressure gauge. Can be used with oil, water, fuel or air. Includes AN 4 braided line, AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of 25", 36" or 48".
$24.99More InfoSteel Shim SBC Timing Cover Seal Kitx
Steel shim seal holder required for KSE front covers.
$15.99More InfoMoroso 37800 Chevy Block Deck Plug Kitx
Reduce upper cylinder wall distortion by installing 3/4" NPT plugs in deck water passage holes of S/B Chevy V8 and 90° V6 Chevys. Machining necessary after installation. Makes water passage holes 5/16".
- Reduces upper cylinder wall distortion
- Water holes must be tapped before the plugs are screwed in
- Block must also be decked after installation
- Plugs also restrict water flow to the cylinder heads by reducing size of water passage holes to 5/16"
$9.99More InfoScrew-In Rocker Studs, 3/8 Inchx
3/8" Chromoly steel. For use without guide plates. Simply tap boss 7/16"-14 and screw in the studs.
Complete set of 16 studs.
Moroso 23997 External Self-Adhesive Heating Pad, 2 x 15 Inch, 150 Wattx
We all know that you should never go on the track with a cold engine or transmission. Rather than running them in the pits you can plug one of these heaters into your generator and in no time, you are ready to race.
- Excellent for pre-heating of oil pans, dry sump tanks and automatic transmission pans
- Preheats oil prior to start-up
- 6" x 12" neoprene rubber-coated heating pad
- Etched foil design distributes heat evenly
- Superior grade silicone outer shell resists oil and dirt
- 36" cord
- 110 volt AC
$589.99More InfoShaver-Wesmar Small Block Chevy Gear Drive, Standard Cam Heightx
Ron Shaver and Bob Westphal have combined their 70+ years experience in the sprint engine building business to create the ultimate gear drive.
- Made of ultra-light aluminum aircraft alloy
- Crack resistant steel idler gear support
- Gears precision cut from 9310 steel, with no more than a .001 total run out with 20 degrees pressure angle
- Fits most small block Chevys
- Highly adjustable and easy to install
$79.99More InfoAluminum Crank Flange, Early Small Block Chevyx
Aluminum crank flange for Small Block Chevy early 2-piece rear main seal
- Early Small Block Chevy
- For 2-piece rear main seal
$74.99More InfoSpeedway High Lift Spring Kit, 1.253 Inch O.D.x
S/B Chevy high lift spring kit for solid lifter cams. Kit includes 16 springs (single w/ damper) and 16 steel retainers for use with 7° locks.
- 1.253" diameter
- .600" max lift
- 116 lbs. at 1.80" assembled height
- 341 lbs. open
- Solid at 1.16"
$9.99More InfoSmall Block Chevy Copper Oil Pump Mounting Gasketsx
Does your oil pump leak where it mounts to the main cap? Not anymore with our dead soft copper oil pump mounting gaskets.
Bag of 3 gaskets.
$24.99More InfoSingle Remote Oil Filter Bracket, Ford Filterx
Aluminum remote oil filter bracket with horizontal hose inlet/outlet. Has 1/2" NPT female hose inlet/outlet threads. This oil filter relocator accepts Ford filters with 3/4"-16 threads. Use AC Delco PF2 or Fram HP1 filters.
Three items are needed for a remote oil filter assembly:
- Choose a remote oil filter bracket.
- Choose a remote bypass adapter to replace your oil filter.
- Choose a hose kit to connect the bypass adapter and oil filter bracket.
$8.99More InfoFel-Pro Gaskets 2330 Small Block Chevy Full Circle Timing Gasketx
These Fel-Pro timing cover gaskets are ideal for high-performance and racing applications. Made of top-quality materials, these gaskets are designed to ensure a leak-free seal.
$211.99$284.83More InfoCOMP Cams 26120-16 Beehive 1.445 Inch Valve Spring, Set of 16x
Please view the product's page for more information
$9.99More InfoManley 42102 Head Bolt Washersx
These hardened steel 7/16" washers ensure proper torque readings. Pack of 34 pieces outfits one Small Block Chevy engine.
EngineQuest RSH350 1986 and Newer S/B Chevy Rear Main Seal Conversionx
Enables a rebuilder to install a 2-piece design crankshaft in a one-piece seal design block. Billet aluminum. Alignment tool required for installation. Uses a 1986 and later 1-pc rear main style oil pan and gasket.
$27.99More InfoARP Fasteners 934-0005 1 Inch Cam Drive Spudx
- Drive: forged APR2000, 220,000 psi alloy chromoly steel with corrosion-resistant oxide finish
- Concentricity: .001 T.I.R., between shaft and hex, 1" length
- Threads: form rolled 9/16" x .625 on cam end, 3/8" hex on drive
$12.99$17.95More InfoDEi 090400 SPA Turbo Gasket Eliminator & Flange Sealant, 14 Oz.xSeal metal-on-metal gaps up to .050" in size with Spa Turbo Gasket Eliminator. It is a grey anaerobic paste that was developed for the turbo market and after curing is able to withstand high temperatures, high pressure, vibration, and moisture. Gasket Eliminator and Flange Sealant is a product your garage should never be without. It will help complete all projects on time and protect against all kinds of unseen problems that may arise.
- Seals metal on metal gaps up to 0.050”
- Cures within 3-4 minutes
- Bonds to steel, aluminum, brass, and other alloys
- Form-in-place gasket flexibility
- Not model-specific; use on all vehicle makes and models
- Suitable replacement for misplaced or lost exhaust gaskets
- Head to Exhaust Manifold
- Manifold to Turbine Housing
- Manifold to Wastegate
- Turbine Housing to Downpipe
$24.99More InfoSuperSeal Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piecex
Small Block Chevy oil pan gasket by SuperSeal.
- Left Hand side ('55-'79) and Right Hand side ('80-'85) dipstick
- For 2-piece rear main seal blocks
- Rubber gasket w/ steel bushings
- '75-'85 w/ thick front seal
$28.99More InfoChain Guide Blockx
Durable plastic block mounts your birdcage or bearing carrier to provide a low resistance guide for any chain.
$44.99$49.99More InfoNeoprene Hose and Fitting Kit for Remote Oil Filter, 48 Inchx
Kit includes enough -8 AN push-on neoprene/rubber hose (1/2" I.D.) to run two 48" lines from your oil filter block adapter to your remote oil filter bracket. Also includes two 1/2" NPT hose ends, two -8 AN hose ends and two 1/2" NPT to -8 AN steel fittings.
$17.99More InfoSmall Block Chevy Steel Guide Plates, 5/16 Pushrodsx
Raised guiding area grips pushrods at highest point for stability and strength. Fits stock diameter 5/16" pushrods. Set of 8.