Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

Your motor mounts have a simple but very important job; keep the motor in place. Along with generating horsepower, engines also generate a lot of thrust that causes the engine to shift and buck violently. It's the motor mounts job to put a tight grip on your motor to reduce vibration and allow all other critical systems to continue to function normally. We understand the importance of motor mounts, which is why we carry a huge selection. Looking for a set of universal motor mounts for your custom setup? Maybe you're needing a conversion kit or even a complete engine swap kit. Whether you're looking for steel or aluminum, rubber or polyurethane, we've got the right mounts for your ride - all at the best prices around.

"Open Wheel, Engine Mounts" Page 1 of 1

  • Front Flex Tab
    $5.99
    Front Flex Tab
    x
                Eliminate the need for an expensive front engine plate and retain the flex advantage when changing engine angle. The reversible flat tab houses the washer with bushing to acheive maximum chassis flex.
            
  • Steel Long Standard Motorplate for Sprint Racing Small Block Chevy
    Steel Long Standard Motorplate for Sprint Racing Small Block Chevy
    x
                These standard long aluminum  rear motorplates are relieved for the dash  and allow for brake line  pass-through. It is an easy way to add weight  to a car to conform to  weight rules.
    • Steel motorplate is an easy way to bolt in weight to conform for weight rules
    • Laser cut 3/8" steel
    • Weighs 35 lbs.
    • Pre-drilled and tapped for S/B Chevy
    • Perfect for 305 racing
  • Eagle Motorsports Standard Short Rear Motorplate
    Eagle Motorsports Standard Short Rear Motorplate
    x
                

    Eagle Motorsports factory-built component. This standard short aluminum rear motorplate is relieved for the dash and allow for brake line pass-through. It is an easy way to add weight to a car to conform to weight rules.

    • Easy way to add weight to a car to conform to weight rules
    • Laser cut 3/8" aluminum
    • Pre drilled and tapped for S/B Chevy
    • Mates with all Chevy blocks, pump combinations and ball housings
    • Two-tone black anodize finish 
  • Eagle Motorsports Steel Rear Motorplate
    Eagle Motorsports Steel Rear Motorplate
    x
                
    Eagle Motorsports factory-built component. 
    • Easy way to add weight to a car to conform to weight rules
    • Laser cut 3/8" steel
    • Pre-drilled and tapped for S/B Chevy
    • Integrated dirt shield for pump
    • Recess for dash or cowl
    • Mates with all Chevy blocks, pump combinations and ball housings
  • Eagle Motorsports Upper Motor Mount Tab
    Eagle Motorsports Upper Motor Mount Tab
    x
                These upper motor mount tabs are made as a factory chassis  component from Eagle Motorsports, but will work on any chassis brand. They are a weld-on steel tab. 
    • Upper motor mount tab
    • Weld-on
    • Steel construction
    • Eagle Motorsports factory chassis component, works for any brand. 

    Eagle Motorsports Chassis Repair Guide

  • Garage Sale - Chevy V8 and LS Motor Mounts for AFCO Mustang K-Member
    Garage Sale
    Garage Sale - Chevy V8 and LS Motor Mounts for AFCO Mustang K-Member
    x
                

    Chevy V8 (small block, big block and LS) motor mounts for AFCO Mustang K-Member 106-20022. Includes a pair of powdercoated steel motor mounts,  and all necessary hardware.

     

    These are garage sale priced because they are missing the black bushings.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Sprint Front Motor and Dry Sump Tank Mount
    Sprint Front Motor and Dry Sump Tank Mount
    x
                This motor plate give the needed extra support when using lightened blocks by utilizing the water pump mounting bolt holes and the lower front mounting holes, also can be used to block the stock water pump holes. 

    Right hand mount has provisions to bolt the oil filter bracket mount and the left hand has provisions for the dry sump tank mounting brackets that are sold separately. You must order upper and/or lower tank mounts. S/B Chevy.
  • J&J Auto Racing 101014BS Front Motor Plate
    J&J Auto Racing 101014BS Front Motor Plate
    x
                The two piece motor plate has three holes which will allow you to use your original front motor plate tabs. 
            
  • Eagle Motorsports Aluminum Standard Long Motorplate
    Eagle Motorsports Aluminum Standard Long Motorplate
    x
                

    Eagle Motorsports factory-built component. This standard long rear motorplate is relieved for the dash and allows for brake line pass-through. It is an easy way to add weight to a car to conform to weight rules. 

    • Laser cut 3/8" aluminum
    • Pre-drilled and tapped for S/B Chevy
    • Mates with all Chevy blocks, pump combinations and ball housings
    • Two-tone black anodize finish 

     

  • Front Flex Tab, Two Tab Kit With Bushings
    Front Flex Tab, Two Tab Kit With Bushings
    x
                Eliminate the need for an expensive front engine plate and retain the flex advantage when changing engine angle. The reversible flat tab houses the washer with bushing to achieve maximum chassis flex.  
            
  • Garage Sale - 1984-1997 Astro Van Motor Mount
    Garage Sale
    Garage Sale - 1984-1997 Astro Van Motor Mount
    x
                

    For use with 7204696. 

    Does NOT work in S10/S15 Chevy or GMC pickups 

     

    This is garage sale priced because it is a single.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Speedway Small Block Chevy Aluminum Rear Motor Plate, Plain
    Speedway Small Block Chevy Aluminum Rear Motor Plate, Plain
    x
                Lightweight 3/8" plain aluminum motor plate.  Will work with both raised and standard cam, small block Chevy engines.  Accepts standard and narrow mount engine blocks.  For Eagle and others. 
            
  • Steel Long Rear Motorplate for Sprint Racing Small Block Chevy
    Steel Long Rear Motorplate for Sprint Racing Small Block Chevy
    x
                These standard long aluminum  rear motorplates are relieved for the dash and allow for brake line  pass-through. It is an easy way to add weight to a car to conform to  weight rules.
    • Steel motorplate is an easy way to bolt in weight to conform for weight rules
    • Laser cut 3/8" steel
    • Weighs 35 lbs.
    • Pre-drilled and tapped for S/B Chevy
    • Perfect for 305 racing
  • Front Motor Tabs
    $4.99
    Front Motor Tabs
    x
                
            
  • Sprint Car Straight Front Motor Tab
    Sprint Car Straight Front Motor Tab
    x
                These front motor mount tabs are made as a factory chassis  component.  They are a weld-on steel tab for your Sprint or  Midget race car.
    • Straight front motor tab
    • Weld-on
    • Steel construction

    Sprint Chassis Repair Guide (Link)

  • Eagle Motorsports Long Rear Motorplate
    Eagle Motorsports Long Rear Motorplate
    x
                
    Eagle Motorsports factory-built component. This standard short aluminum rear motorplate is relieved for the dash and allow for brake line pass-through. It is an easy way to add weight to a car to conform to weight rules. 
    • Two tone black anodize finish
    • Machined from 7075 aluminum
    • Laser cut 3/8" aluminum
    • Pre-drilled mounting holes
    • Mates with all Chevy blocks, pump combinations and ball housings
    • Two-tone black anodize finish