Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Electric Switches & Connectors At Speedway Motors

Find all your sprint, mini sprint, and midget race car switch panels, warning lights and wiring accessories at Speedway Motors - America's Racing Super Market. Speedway Motors stocks many of the most dependable brands in the racing industry, including AFCO, Longacre and Painless Wiring. Shop now for same day shipping on these open wheel racing electrical components!

Featured Products
Brake Light Switch with 3/8 Inch IFM Adapter Fitting
Brake Light Switch with 3/8 Inch IFM Adapter Fitting
SKU-91031304
x
            

This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

  • Designed to be installed into a 3/8"-24 inverted flare female fitting
  • Switch has two 1/4" wide male spade terminals
  • 3/8"-24 IFM thread adapter included
NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.
Toggle Ignition On Switch
$9.99
Product Rating: 4.75 Stars
Toggle Ignition On Switch
SKU-91364380
x
            Toggle switch works great as a kill switch or with other auxiliary equipment. 25 amp SPST switch with rubber boot and on/off plate.
        
Push Button Starter Switch
$5.99
Product Rating: 4.86 Stars
Push Button Starter Switch
SKU-91364381
x
            

Momentary switch has rubber boot which protects switch from moisture. Easy install to give any classic car that hot rod feel. Features a high quality die cast zinc housing with brass terminals.

Auto Meter 5289 GPS Sending Module-Universal for Electric Speedometers
Auto Meter 5289 GPS Sending Module-Universal for Electric Speedometers
SKU-1825289
x
            

This unit allows nearly any electric speedometer to use free GPS signals to drive the speedometer. No more cables, no more calibration drives. If you've got an Auto Meter electronic speedometer, it's a plug and play solution. Calibration on non-Auto Meter speedometers takes about 10 seconds and doesn't require driving. The Module uses the fastest possible GPS technology for truly seamless functionality.

  • Lightning fast 10Hz Signal
  • Separate paintable 1" square antenna with optional magnetic attachment capability
  • Waterproof antenna and module assembly (IP67 sealed)
  • Factory calibrated for 16,000 pulses per mile
  • One touch calibration
  • Compatible with Electronic Speedometers Only

"Open Wheel, Electrical, Lighting and Body" Page 1 of 2

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    SKU-91050302
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • MSD 7990 Dual Ignition Kill Switch
    MSD 7990 Dual Ignition Kill Switch
    SKU-5477990
    x
                

    When running a crank trigger, you now have an option of two base timings. When the track gets slick, just flip the switch to kill some power.

     MSD Rebate (Link)

  • Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
    Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
    SKU-47544611
    x
                These high capacity (40 amp at 12 volts) ignition switch panels with aircraft style cover and pilot light are easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration. They come pre-wired with high insulation "Fat" wires and soldered terminals with heat shrinked seals.
    • Starter button with weatherproof cover
    • Lightweight aluminum panel
    • Plugs into Longacre wiring harness P/N 44930
    • Ignition Switch:
      • Style:    Toggle
      • Cover:    Aircraft style flip
      • Pilot Light Included:   Yes
      • Rating:    40 amps @ 12 volts
    • Starter Switch:
      • Style:    Push button
      • Cover:    Weatherproof rubber
      • Rating:    15 amps @ 12 volts resistive
    • Panel:
      • Material:    Lightweight aluminum
      • Panel Dimensions:   3-1/2" x 3-1/2"
      • Wiring Included:    Yes
  • Toggle Ignition On Switch
    $9.99
    Product Rating: 4.75 Stars
    Toggle Ignition On Switch
    SKU-91364380
    x
                Toggle switch works great as a kill switch or with other auxiliary equipment. 25 amp SPST switch with rubber boot and on/off plate.
            
  • Safety Kill Switch
    $19.99
    Product Rating: 4.50 Stars
    Safety Kill Switch
    SKU-91364384
    x
                

    This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

    20 amp rating at 12 VDC.

  • Painless Wiring 70402 Two Wire Weatherpack Connectors
    Painless Wiring 70402 Two Wire Weatherpack Connectors
    SKU-91012212
    x
                

    A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

  • Lokar 1110118 Dial-In Board 1-5/8 Inch Cage Mount - Clear
    New
    Lokar 1110118 Dial-In Board 1-5/8 Inch Cage Mount - Clear
    SKU-4911110118
    x
                

    This 3-digit dial in board from Lokar comes with a bracket. This mount fits a 1-5/8" diameter tube.

    • 6061 T-6 Aluminum
    • No welding or drilling required
    • No interference with roll-bar padding
    • Adjustable arm for leveling
    • Made in the USA
  • Painless 30103 Fan Relay w/ Thermostatic Switch, 185/175 Degree
    New
    Painless 30103 Fan Relay w/ Thermostatic Switch, 185/175 Degree
    SKU-91030103
    x
                

    This Fan Relay from Painless Performance comes with a Thermostatic switch that screws into the engine block or intake manifold. This offers good protection for your vehicles electric fan and the vehicles wiring harness.

    Kit includes:

    • 30 Amp Circuit Breaker
    • SPST 40 Amp Relay
    • Thermostatic switch 185°F On/175°F Off (thread size: 3/8"-18NPT)
    • 1/2"NPT to 3/8"NPT adapter
    • Relay base with harness
    • Crimp-on terminals
    • Mounting hardware

     

  • Longacre 44661 Flip-Up Start/Ignition Panel w/ 1 ACC and Pilot Light
    Longacre 44661 Flip-Up Start/Ignition Panel w/ 1 ACC and Pilot Light
    SKU-47544661
    x
                These high capacity (40 amp at 12 volts) ignition switch panels with aircraft style cover and pilot light are easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration. They come pre-wired with high insulation "Fat" wires and soldered terminals with heat shrinked seals.
    • Starter button with weatherproof cover
    • Lightweight aluminum panel
    • Plugs into Longacre wiring harness P/N 44930
    • Ignition Switch:
      • Style:    Toggle
      • Cover:    Aircraft style flip
      • Pilot Light Included:   Yes
      • Rating:    40 amps @ 12 volts
    • Starter Switch:
      • Style:    Push button
      • Cover:    Weatherproof rubber
      • Rating:    15 amps @ 12 volts resistive
    • Accessory Switch:
      • Quantity Included:    1
      • Style:    Toggle
      • Cover:    Silicon rubber
      • Pilot Lights Included:    Yes
      • Rating:    40 amps @ 12 volts
    • Panel:
      • Material:    Lightweight aluminum
      • Panel Dimensions:   3-1/2" x 3-1/2"
      • Wiring Included:    Yes
  • Lokar 1110107 Dial-In Board 1-1/2 Inch Cage Mount - Black
    New
    Lokar 1110107 Dial-In Board 1-1/2 Inch Cage Mount - Black
    SKU-4911110107
    x
                

    This 3 digit dial-in board from Lokar comes with a bracket.  It is designed to fit 1-1/2" diameter tubes.

    • Anodized Black
    • No welding or drilling required
    • No interference with roll-bar padding
    • 6061 T-6 Aluminum
    • Made in the USA
  • Auto Meter 990340 Right Angle Reversing Adapter for Cobra Speedometers
    Auto Meter 990340 Right Angle Reversing Adapter for Cobra Speedometers
    SKU-182990340
    x
                

    These quality made adapters are designed for use with Cobra series speedometers that require reverse cable rotation for proper operation. They accept the standard 5/8" thread-on speedometer cable and are designed for use at the back of the instrument, not intended for installation on the transmission.

    • For Cobra series speedometers that require reverse cable rotation
    • Accepts standard 5/8 in. speedo cable
  • Lokar 1110134 Adjustable Angle Mount for MEGA Dial-In Board -Polished
    New
    Lokar 1110134 Adjustable Angle Mount for MEGA Dial-In Board -Polished
    SKU-4911110134
    x
                

    This 4-digit mega dial-in board mount comes with a bracket. The bracket is a universal bolt-on adjustable angle mount.

    • 6061 Aluminum
    • No welding or drilling reuqred
    • No interference with roll-bar padding
    • Made in the USA
    • Adjustable arm for leveing
  • RACEceiver Stereo Splitter
    $9.99
    RACEceiver Stereo Splitter
    SKU-910150503
    x
                

    This small splitter allows any RACEceiver to power 2 headsets simultaneously!

    • Standard 3.5 mm input and output
  • Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    New
    Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    SKU-1068000044402
    x
                These heavy duty dual fans wire harness kits from Afco are designed  as a universal kit for positive or negative controlled units.  They  feature 40 amp relays, heavy gauge wiring, and all connectors needed.
    • Hardware included
    • Color installation instructions included
    • 40 amp relays
    • Positive or Negative controlled
    • Universal for dual cooling fans
    • Temp switch sold seperately
  • Magneto Kill Switch
    $12.99
    Product Rating: 5.00 Stars
    Magneto Kill Switch
    SKU-9405582
    x
                  Specially designed for dirt racing. Seal back. Silver contacts. 23 amp rating.   
            
  • Lokar 1110148 1-1/2 In Dial-In Board Cage Mount for Mega Board - Clear
    New
    Lokar 1110148 1-1/2 In Dial-In Board Cage Mount for Mega Board - Clear
    SKU-4911110148
    x
                

    This 4-digit mega dial-in board mount comes with a mounting bracket. The bracket is designed to fit 1-1/2" diameter tubing.

    • 6061 T-6 Aluminum
    • No welding or drilling required
    • No interference with roll-bar padding
    • Adjustable arm for leveling
    • Made in the USA
  • Painless Wiring 70406 Six Wire Weatherpack Connectors
    Painless Wiring 70406 Six Wire Weatherpack Connectors
    SKU-91012215
    x
                A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.
            
  • Lokar 1330021 Interior Battery Disconnect Lever Kit- Vari-Mnt 125 Amp
    New
    Lokar 1330021 Interior Battery Disconnect Lever Kit- Vari-Mnt 125 Amp
    SKU-4911330021
    x
                

    This interior battery disconnect from Lokar allows a person to turn the electrical power on/off from the drivers seat. It works in conjunction with a fire system kill switch.

    • Fits B&M Pro Ratchet, TCI Thunder Stick, TCI Outlaw, TCI Lightning, Hurst Quarter Stick, or can be floor mounted
    • Lokar vari-mount
    • 125 Amp
    • Red billet aluminum power lever
    • Made in the USA
    • Kit standard with 8' push pull cable
  • Kinsler Fuel Injection 20264 Jack Shaft Kit, Hilborn
    Kinsler Fuel Injection 20264 Jack Shaft Kit, Hilborn
    SKU-4733336
    x
                
    Jackshaft kit provides a perfect sync of both banks throughout the entire rotation. The jack shaft kit features billet pedestals, arms and stops while also having stainless steel crossbars. These are combined with high quality rod ends.
    • Perfect sync of both banks throughout entire rotation
    • Billet pedestals, arms and stops
    • Stainless steel cross bars and high quality rod ends

  • Lokar 1110114 Dial-In Board 1-5/8 Inch Cage Mount - Polished
    New
    Lokar 1110114 Dial-In Board 1-5/8 Inch Cage Mount - Polished
    SKU-4911110114
    x
                

    This polished 3-digit dial-in board from Lokar comes with a bracket. This bracket clamps on to a 1-5/8" diameter tube.

    • 6061 T-6 Aluminum
    • No welding or drilling required
    • No interference with roll-bar padding
    • Adjustable arm for leveling
    • Made in the USA
  • JOES 25865 1 Inch Temperature Gauge Hose Fitting
    JOES 25865 1 Inch Temperature Gauge Hose Fitting
    SKU-96025865
    x
                

    Monitor your engine temp to catch problems before they damage your expensive Micro Sprint Engine. Our new temp fitting easily connects to your rubber hose water line. The threaded port fitting matches up to your standard temp sensor.

    • Catch problems before they damage your expensive Micro Sprint Engine
    • Easily connects to your rubber hose water line
    • Threaded port fitting matches up to your standard temp sensor
  • MPD Racing 036000LT Lightened Wing Cylinder Slider Valve
    MPD Racing 036000LT Lightened Wing Cylinder Slider Valve
    SKU-546360
    x
                

    This compact MPD wing cylinder slider valve is made of high quality aluminum and weighs only .50 pounds. Has 1/8" NPT threads to connect to your power steering pump and wing cylinders. This product is manufactured & assembled in the USA out of materials from the USA.

    For Sprint Cars, Micros and Mini Sprints.

  • MSD 8985 Timing Tapes
    $5.99
    Product Rating: 4.60 Stars
    MSD 8985 Timing Tapes
    SKU-5478985
    x
                

    MSD's timing tape set comes with eight different tapes to fit balancers from 5-1/4" to 8" diameters.

    MSD Rebate (Link)

  • Afco 8000044401 Universal Single Cooling Fan Wire Harness, 40 Amp Relay
    New
    Afco 8000044401 Universal Single Cooling Fan Wire Harness, 40 Amp Relay
    SKU-1068000044401
    x
                

    These heavy duty single fan wire harness kits from Afco are designed as a universal kit for positive or negative controlled units.  They feature a 40 amp relay, heavy gauge wiring, and all connectors needed.

    • Hardware included
    • Color installation instructions included
    • 40 amp relay
    • Positive or Negative controlled
    • Universal for single cooling fan
    • Temp switch sold seperately

     

  • Lokar 1330012 Interior Battery Disconnect Lever Kit-Direct Mnt 300 Amp
    New
    Lokar 1330012 Interior Battery Disconnect Lever Kit-Direct Mnt 300 Amp
    SKU-4911330012
    x
                

    This interior battery disconnect from Lokar allows you to turn the electrical power on/off from your drivers seat. It works in conjunction with your fire system kill switch.

    • Fits B&M Pro Bandit, Quarter Pro, Precision Performance Products Shifters
    • Direct Mount
    • 300 Amp
    • Red billet aluminum power lever
    • Made in the USA
    • Kit standard with 8' push pull cable
  • DPDT Momentary Toggle Switch
    $14.99
    DPDT Momentary Toggle Switch
    SKU-91364382
    x
                

    Universal heavy duty 3-position momentary toggle switch. Features a nickel-plated brass switch, phenolic housing, and plated steel cap. Rated at 25A at 12V, 15A at 24V, and 10A at 36V DC.

    • Mounting Stem:  15/32" -32 thread, 15/32" long, and fits panels up to 9/32"
    • Six Screw Terminals:  6-32 screws
    • Electrical Rating:  25A at 12V, 15A at 24V, and 10A at 36V DC

    Works great as a linear actuator switch!

    Note: Up=Momentary On, Center=Off, Down=Momentary On.

  • Lokar 1110124 Universal Adjustable Angle Mount - Polished
    New
    Lokar 1110124 Universal Adjustable Angle Mount - Polished
    SKU-4911110124
    x
                

    This 3-digit dial-in board from Lokar comes with bracket. The mount is a universal bolt-on adjustable angle mount.

    • 6061 Aluminum
    • No welding or drilling required
    • No interference with roll-bar padding
    • Adjustable arm for leveling
    • Made in the USA
  • Lokar 1330011 Interior Battery Disconnect Lever Kit-Direct Mnt 125 Amp
    New
    Lokar 1330011 Interior Battery Disconnect Lever Kit-Direct Mnt 125 Amp
    SKU-4911330011
    x
                

    This interior battery disconnect lever from Lokar allows you to turn the electrical power on or off form your drivers seat. It works in conjunction with your fire system kill switch.

    • Red billet aluminum power lever
    • Fits B&M Pro Bandit, Quarter Pro, and Precision Performance Products Shifters
    • 125 Amp
    • Direct Mount
    • Made in the USA
    • Kit standard with 8' push pull cable
  • Double Throw Toggle Switch with Boot
    Double Throw Toggle Switch with Boot
    SKU-91064015
    x
                

    Single pole, double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.

    • Three terminals
    • Two toggle positions
    • Rated for 25 amps at 12 volts DC

     

  • MSD 8193 Weatherpak Disconnect Pin Tool
    MSD 8193 Weatherpak Disconnect Pin Tool
    SKU-5478193
    x
                

    MSD's Weatherpak Pin Tool allows you to remove the terminal from the weathertight connector if you need to make repairs or change your wiring.

     MSD Rebate (Link)

  • Longacre 904518 AccuTech SMi Replacement Tachometer Lead Wire
    Longacre 904518 AccuTech SMi Replacement Tachometer Lead Wire
    SKU-475904518
    x
                These lead wires from Longacre are replacement for SMi tachometers. 
  • Painless Wiring 50202 8-Switch Panel, Non-Fused, Roll Bar Mount
    New
    Painless Wiring 50202 8-Switch Panel, Non-Fused, Roll Bar Mount
    SKU-91050202
    x
                

    This roll bar mounted switch panel is to be used with 910-50001 wire harness. The switches that are included on this switch panel are:

    • Start
    • Ignition
    • Electric Cooling Fan
    • Fuel Pump 1
    • Fuel Pump 2
    • Electric Water Pump
    • Lights
    • Accessory 

    Installation Instructions (PDF)

  • Lokar 1110117 Dial-In Board 1-5/8 Inch Cage Mount - Black
    New
    Lokar 1110117 Dial-In Board 1-5/8 Inch Cage Mount - Black
    SKU-4911110117
    x
                

    This 3-digit dial-in board from Lokar comes with a bracket. The bracket clamps on to a 1-5/8" diameter tube.

    • 6061 T-6 Aluminum
    • Black Anodized
    • No welding or drilling required
    • No interference with the roll-bar padding
    • Made in the USA
  • Push Button Starter Switch
    $5.99
    Product Rating: 4.86 Stars
    Push Button Starter Switch
    SKU-91364381
    x
                

    Momentary switch has rubber boot which protects switch from moisture. Easy install to give any classic car that hot rod feel. Features a high quality die cast zinc housing with brass terminals.

  • Painless Wiring 50406 6-Switch Lighted Panel, Non-Fused with Wiring
    New
    Painless Wiring 50406 6-Switch Lighted Panel, Non-Fused with Wiring
    SKU-91050406
    x
                

    This 6-switch lighted non-fuse rocker switch panel with wiring from Painless Performance is made in the USA! This heavy-duty panel is pre-assembled with vibration-resistant terminals and 18 feet of TXL wire. The panel controls:

    • Start
    • Ignition Fuel Pump
    • Water Pump/Fan
    • 2 Accessories
    Installation Instructions (PDF)
     
  • Painless 50102 Fuel Pump Relay Kit
    $45.99
    $66.99
    New
    Painless 50102 Fuel Pump Relay Kit
    SKU-91050102
    x
                

    This fuel pump relay kit from Painless Performance prevents voltage drops at the fuel pump to maintain a constant fuel pump pressure and to prevent fuel pump amperage overloads from damaging the vehicles electrical system. This product is made in the USA.

    Kit includes:

    • 30 Amp Heavy duty relay
    • Relay base with wire harness
    • 30 Amp circuit breaker
    • Crimp-on terminals
    • Mounting hardware
  • Lokar 1330023 Interior Battery Disconnect Lever Kit-Vari-Mnt No Switch
    New
    Lokar 1330023 Interior Battery Disconnect Lever Kit-Vari-Mnt No Switch
    SKU-4911330023
    x
                

    This interior battery disconnect allows you to turn the electrical power on/off from the drivers seat. It works in conjunction with a fire system kill switch.

    • Fits B&M Pro Ratchet, Thunder Stick, Outlaw, Lightning, ST Quarter Stick Shifters
    • Lokar vari-mount or can be mounted to the floor
    • No Switch Included
    • Red billet aluminum power lever
    • Made in the USA
    • Kit standard with 8' push pull cable
  • Lokar 1330013 Interior Battery Disconnect Lever-Direct Mnt No Switch
    New
    Lokar 1330013 Interior Battery Disconnect Lever-Direct Mnt No Switch
    SKU-4911330013
    x
                

    This interior battery disconnect lever kit allows the driver to turn the electrical power on/off from the drivers seat. It works in conjunction with the fire system kill switch.

    • Fits B&M Pro Bandit, Quarter Pro, and Precision Performance Products Shifters
    • Lokar Direct Mount
    • Red billet aluminum power lever
    • No switch included
    • Made in the USA
    • Kit standard with 8' push pull cable
  • Bulkhead Battery Cable Connector, Red
    Bulkhead Battery Cable Connector, Red
    SKU-91064010
    x
                This handy connector allows you to run your battery cable through a  firewall the right way. Utilizes heavy duty 3/8" x 16 brass terminals  and requires a 1-1/4" hole.
            
  • Lokar 1110104 Dial-In Board 1-1/2 Inch Cage Mount - Polished
    New
    Lokar 1110104 Dial-In Board 1-1/2 Inch Cage Mount - Polished
    SKU-4911110104
    x
                

    This polished 3-digit dial-in board from Lokar comes with a bracket. It is designed to fit 1-1/2" diameter tubes.

    • Adjustable arm for leveling
    • No welding or drilling required
    • No interference with roll-bar padding
    • 6061 T-6 Aluminum
    • Made in the USA
Goto Previous PagePrevious Page
1 2