Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 30

Products

Driveline and Axles

Shop Open Wheel Driveline & Rear End At Speedway Motors

Speedway Motors can help you put the power to the wheels with a complete selection of Sprint and Midget driveline components. We stock fully-loaded quick change rearend assemblies, plus all the differential gears and parts to service them. Quality open wheel components from a reliable source, Speedway Motors.

Featured Products
  • Rod End Supply 5010-2RS Mini Sprint Rear Axle Bearing, Dual
    Rod End Supply 5010-2RS Mini Sprint Rear Axle Bearing, Dual
    (Part #9601265)
    x
                
    • 1.97" I.D.
    • 3.15" O.D. 
    • 1.256" Wide
  • Winters Performance 3558 10 Piece Axle Spacer Kit
    Winters Performance 3558 10 Piece Axle Spacer Kit
    (Part #8023558)
    x
                This axle spacer Kit includes:

    • Two .750" unsplined spacers
    • Two .375" unsplined spacers
    • Two 1.00" splined spacers
    • One 2.00" splined spacers
    • One .750" tapered & splined spacer
    • One 1.50" tapered & splined spacer
    • One 2.00" tapered & splined spacer
  • Winters Rear End Accessory Package
    $89.99
    $99.99
    Winters Rear End Accessory Package
    (Part #8028269)
    x
                

    Simply purchase a rearend, then add this kit and you have what you need to go racing.

    Kit includes: 

    • Rotor Mount
    • Hex Nuts (for lightweight axles not Ultralite)
    • Cable Bracket
    • Breather Kit
    • Torque Tube Stud Kit
    • 3/16" Steel Spacer
    • Brake Clamp Spacer
    • Steel Axle Saver Spacer
  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 4.75 Stars
    Winters Quick Change Gears, 10 Spline
    (Part #80285)
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

  • Winters 6-Bolt Cover Quick Change Rear End, 4.86 Inch Ring and Pinion
    Winters 6-Bolt Cover Quick Change Rear End, 4.86 Inch Ring and Pinion
    (Part #8025066)
    x
                
    These lightweight 6 bolt rear ends come with a number of friction reducing options. These are thermal coated and constructed of steel.
    • 31-spline ultra-light aluminum spool
    • Sprint center magnesium case
    • 4.86 ring and pinion
    • Thermal coated
    • 6-rib side bells
    • Steel 3" tubes with Grand National ends
    • Low drag seals

    Note: These rear-ends are 60" wide with pinion on center.

    The complete rear-ends come with:

    • Bare rear listed above
    • Winters platinum Grand National hubs, bearings and seals
    • Aluminum drive plates
    • 31-spline gun drilled axle
    • .810 brake rotors
  • Winters 6-Bolt Rear Cover Quick Change Rear End, 4.12 Inch Ring and Pinion
    Winters 6-Bolt Rear Cover Quick Change Rear End, 4.12 Inch Ring and Pinion
    (Part #8025071)
    x
                

    Check out these 6-bolt rear cover quick changes with 4.12 inch ring and pinions from Winters Performance. These come with 2-7/8" large hub and bearings friction reducing options.

    • 4.12" Ring and Pinion
    • 31-spline ultralight aluminum spool
    • Spring center magnesium case
    • Thermal Coated
    • 6-rib side bells
    • Steel 3" tubes with Grand National ends
    • Low drag seals
    • Lightweight 3" tubes with 2-7/8" bearings
    • Winter platinum 2-7/8" Grand National hubs, bearings and seals
    • Steel drive plates
    • 31-spline gun drilled axle
    • .810" brake rotors
  • Mini-Sprint Aluminum Rear Sprocket, 6.438 Inch Bolt Circle
    Mini-Sprint Aluminum Rear Sprocket, 6.438 Inch Bolt Circle
    (Part #960643)
    x
                These lightweight 7075-T6 aluminum sprockets for Mini/Micro Sprints fit 6-lug hubs with the 6.438" bolt circle. Available from 42-55 tooth.
            
  • Front Hub Bearings
    $5.99
    Product Rating: 4.50 Stars
    Front Hub Bearings
    (Part #9601285)
    x
                

    Sealed ball bearing that will work with most make and model Micro hubs.

    • 1" I.D., 2" O.D., .562" wide. 

Filter

"Open Wheel, Driveline and Axles" Page 1 of 30

Page 1 of 30

  • Winters Performance 6252 Pro-Eliminator Rearend Stationary Coupler
    Winters Performance 6252 Pro-Eliminator Rearend Stationary Coupler
    (Part #8026252)
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Stationary Coupler

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Dana Spicer 5-1350X Heavy Duty Cross U-Joint, 1350 Series, Non-Greaseable
    Dana Spicer 5-1350X Heavy Duty Cross U-Joint, 1350 Series, Non-Greaseable
    (Part #910451350)
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Heavy Duty U-joint
    • 1350 Series
    • 3.625 x 1.188
    • Non-Greaseable cross shaft


  • Henchcraft Mini Sprint 1.5 Inch Left Rear Number 4 Wheel Spacer
    Henchcraft Mini Sprint 1.5 Inch Left Rear Number 4 Wheel Spacer
    (Part #9706880)
    x
                

    New from Henchcraft Chassis, these aluminum rear axle spacers are designed for 2" splined axles for Mini Lightning Sprint chassis.

    • Sized for proper component alignment
    • 1-1/2" left rear #4 spacer
    • For 2" splined axles
    • Aluminum construction
    • For use on Henchraft Mini Lightning Sprint chassis
  • Winters D-Mount Aluminum Front Hubs, RH/LH Rotor Mounts
    Winters D-Mount Aluminum Front Hubs, RH/LH Rotor Mounts
    (Part #80239802)
    x
                

    Winters direct mount front hubs are forged 2024-T3 aluminum for superior strength, durability and weight savings. Hubs are then CNC machined to precise tolerances. Gold anodized to resist corrosion.

    Kit includes bearings, seals, wheel studs, nuts, LH hub w/brake mount, RH hub w/ brake mount, and billet threaded hubcaps.

  • Dana Spicer 5-3615X U-Joint w/Coated Caps for Alum Driveshaft, 1350 Series
    Dana Spicer 5-3615X U-Joint w/Coated Caps for Alum Driveshaft, 1350 Series
    (Part #910453615)
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Coated Caps
    • 1350 Series
    • 3.625 x 1.188 
    • For use with Aluminum drive shafts
    • Non-Greaseable cross shaft


  • Winters Performance 6818 Pro-Eliminator Midget Magnesium Gear Cover
    Winters Performance 6818 Pro-Eliminator Midget Magnesium Gear Cover
    (Part #8026718)
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    Pro Eliminator Rear End Part Guide (Link)

  • DMI RRC-1373 Vault-Lock Quick Change Sprint Rearend Gear Cover
    DMI RRC-1373 Vault-Lock Quick Change Sprint Rearend Gear Cover
    (Part #9401373)
    x
                

    The Vault-Lock rearend gear cover turns timely gear changes into a 15 second job!  These covers eliminate the process of having to remove and reinstall the 6 outside cover bolts by utilizing the patent pending center Vault-Lock design.  Designed to fit Winters or DMI rearends.

    • Speed-up gear change time with the Vault-Lock gear cover
    • Fits Winters Performance or DMI rearends
  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    (Part #8027794ASR)
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Winters Performance 3942-03/9105 27-1/4 32-Spline Ball Drive Shaft Kit
    Winters Performance 3942-03/9105 27-1/4 32-Spline Ball Drive Shaft Kit
    (Part #802394203)
    x
                Reduce deflection and eliminate bind with this new driveline development.  Lighter than many titanium drive shafts, this large OD shaft offers the swivel ball system with 32 splines on each end.  Non-swivel style rearends can be upgraded to accept this driveshaft.
            
  • Winters Performance 3980 Black Aluminum D-Mount Front Hubs
    Winters Performance 3980 Black Aluminum D-Mount Front Hubs
    (Part #8023981)
    x
                

    Winters direct mount front hubs are forged 2024-T3 aluminum for superior strength, durability and weight savings. Hubs are then CNC machined to precise tolerances. Black anodized to resist corrosion.

    Kit includes bearings, seals, wheel studs, nuts, LH hub w/brake mount, RH hub w/o brake mounts, and billet threaded hubcaps.

  • Winters Hercules Sprint U-Joint
    Winters Hercules Sprint U-Joint
    (Part #8024865)
    x
                The latest development in U-Joint technology, Hercules is the answer to driveline failure. Billet 7075 aluminum captures the journal while U-bolts hold it securely. Weighs only 3.8 lbs and is available in both 16 or 32 spline. 
            
  • DMI SRC-2393 Lightweight Torque Tube
    DMI SRC-2393 Lightweight Torque Tube
    (Part #9402393)
    x
                DMI all aluminum constructed torque tube, 28" in length. Works with any rear end and for Sprint Cars only.
            
  • MPD Racing 02160030 Midget 2.3 Inch O.D. Torque Tube
    MPD Racing 02160030 Midget 2.3 Inch O.D. Torque Tube
    (Part #5462160)
    x
                Midget torque tube and collar by MPD Racing. Will work with any ball and housing, it is a midget drive line only.
            
  • Winters Performance 7455 Pro-Eliminator Midget Pinion Nut O-Ring
    Winters Performance 7455 Pro-Eliminator Midget Pinion Nut O-Ring
    (Part #8027455)
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    Pro Eliminator Rear End Part Guide (Link)

  • Dana Spicer 5-3614X U-Joint w/Coated Caps for Alum Driveshaft, 1330 Series
    Dana Spicer 5-3614X U-Joint w/Coated Caps for Alum Driveshaft, 1330 Series
    (Part #910453614)
    x
                

    Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

    Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

    • Coated Caps
    • 1330 Series
    • 3.625 x 1.062 
    • For use with Aluminum drive shafts
    • Non-Greaseable cross shaft


  • Henchcraft Chassis Mini Lightning Sprint Sprocket Guards
    Henchcraft Chassis Mini Lightning Sprint Sprocket Guards
    (Part #9708315)
    x
                

    Keep your chain both protected and in line with these billet guards. Split in two pieces for easy removal and alignment.

    • 2 Piece per side design
    • 5.25" Bolt Circle
    • CNC machined aluminum
    • Easily removable for gear changes
    • For use on Henchcraft Mini Lightning Sprint chassis
Goto Previous PagePrevious Page
1 2 3 4 5 ... 30