Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 29

Products

Disc Brakes and Accessories

Shop Open Wheel Brakes & Hubs At Speedway Motors

Speedway Motors has the brake components you need for the rigors of open wheel racing. We carry top quality rotors and calipers for Sprints, Mini Sprints, and Midgets, as well as lightweight aluminum hubs to mount your brakes. Our complete assortment of brake pads will help you dial in your brakes for track conditions. Choose from a great selection of master cylinders and high temp racing brake fluid as well. Trust Speedway Motors with all your sprint car braking needs!

Featured Products
  • Afco 6651021 C2 Compound Brake Pads for F88 Caliper
    Afco 6651021 C2 Compound Brake Pads for F88 Caliper
    (Part #1066651021)
    x
                AFCO proudly offers its line of C2 racing brake pads. These pads have  gone through extensive testing in the toughest racing environments, and  are derived from the latest materials in friction products and are made  using the latest manufacturing technologies.

    C2 compound provides exceptional high temperature performance and is designed to withstand wide-ranging temperature changes. This gives the driver predictable feel and excellent control qualities lap after lap. C2 has a high torque value yet has very long pad wear life while remaining rotor friendly. Perfect choice for use in the 500 to 1200 degree operating range.
    • Includes 4 pads, completes one axle
    • Withstands wide-range temperature changes
    • High torque life
    • Long pad wear life
    • Rotor Friendly

    These brake pads from AFCO fit the new F88 caliper or a standard SL style caliper. The C2 compound is designed for a wide range or temperatures and provides excellent cold bite while allowing aggressive brake power.

    Best used on:

    • F88 or standard SL style caliper
    • Rear of dirt late models
    • Front of asphalt late models
    • Sprint cars using steel non-drilled inboard rotors

    Pads are sold as a set of 4. (One set fits 2 calipers.)

    Tech Tip:  Only use full metallic pads on coated rotors.

     
    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.
    The AFCO brake pads fit in AFCO's new F88 caliper or a standard SL style caliper. The C2 pad compound is designed for a wide range of brake temperatures and provides excellent cold bite while providing aggressive braking power. The pads are best used on the rear of dirt late models, front of asphalt late models, and on sprint cars using steel non-drilled inboard rotors. - See more at: http://www.afcodynapro.com/store?search_api_views_fulltext=6651021#sthash.oFLgPaoz.dpuf
    The AFCO brake pads fit in AFCO's new F88 caliper or a standard SL style caliper. The C2 pad compound is designed for a wide range of brake temperatures and provides excellent cold bite while providing aggressive braking power. The pads are best used on the rear of dirt late models, front of asphalt late models, and on sprint cars using steel non-drilled inboard rotors. - See more at: http://www.afcodynapro.com/store?search_api_views_fulltext=6651021#sthash.oFLgPaoz.dpuf
    The AFCO brake pads fit in AFCO's new F88 caliper or a standard SL style caliper. The C2 pad compound is designed for a wide range of brake temperatures and provides excellent cold bite while providing aggressive braking power. The pads are best used on the rear of dirt late models, front of asphalt late models, and on sprint cars using steel non-drilled inboard rotors. - See more at: http://www.afcodynapro.com/store?search_api_views_fulltext=6651021#sthash.oFLgPaoz.dpuf
  • Speedway 156 Hard Brake Pad
    $8.99
    Speedway 156 Hard Brake Pad
    (Part #9191566)
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    .450" thick, 1.97" long, 589 A Compound

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 120-4062 Billet Dynalite Single Caliper, 3.25 In Mnt, 1.75/.38
    Wilwood 120-4062 Billet Dynalite Single Caliper, 3.25 In Mnt, 1.75/.38
    (Part #8351204062)
    x
                

    Wilwood’s Billet Dynalite Single utilizes close tolerance design and manufacturing techniques which results in the most rigid, lightweight and attractive caliper in the evolution of the Dynalite Single Series. Starting at 1.58 pounds, the Billet Dynalite Single is perfect for compact high performance braking as required in Open Wheel, Drag, Modified, Kart, Motorcycle and Off Road applications.

    • Lightweight, compact design with two stainless steel 1-3/4" pistons
    • Use with .38" rotors
    • Has 3-1/4" mount centers
    • Uses "Single Quick-Change" style pads

    Wilwood Dynalite Dimensions (Link)

  • Wilwood 160-12041 Super Alloy 32 Vane Vented Scalloped Rotor, 11.75 In
    Wilwood 160-12041 Super Alloy 32 Vane Vented Scalloped Rotor, 11.75 In
    (Part #83516012041)
    x
                

    These new Super Alloy rotors are designed specifically for Dirt Late Model and Modified racing. Wilwood’s proprietary Super Alloy material provides the lowest rotating and un-sprung weight, without degradation, shrinkage and warping like comparable Iron & Steel lightweight rotors. Super Alloy rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. The special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads.

    Features:

    • Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
    • Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
    • Vented castings provide increased cooling capacity over machined steel plate rotors

    Specs:

    • Width: 1.25 Inches
    • Diameter: 11.75 Inches
    • 5.44 Pounds
    • Material: Stainless
    • Count: 32 Vane
    • Type: Alloy Scalloped
    • Style: Drilled
    • Surface Finish: Plain
    • Rotor Bolt Circle: 8 x 7.00"
    • Rotor Mount Hole Size: .326"
    • Lug ID/Registration: 6.38"
    • Far Side Inside Diameter: 8.19"

    Notes:

    • Suitable for Light Dirt Racing applications. Scalloped Rotors are unsafe for street use.
    • Recommended Brake Pads: Polymatrix H and CM(Sintered Metallic) Compounds
    • For brake tuning considerations: Polymatrix H has more aggressive friction than CM 

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.

    Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage. 

  • AFCO 7242-0092 F88i Series 1.25 Inch Caliper Bridge Bolt Kit
    AFCO 7242-0092 F88i Series 1.25 Inch Caliper Bridge Bolt Kit
    (Part #10672420092)
    x
                

    Assorted Service Parts for F88i Series Calipers made by US Brake.

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

  • Afco 6690246 Bridge Bolt Kit for 1.25 Inch F88 Forged Aluminum Caliper
    Afco 6690246 Bridge Bolt Kit for 1.25 Inch F88 Forged Aluminum Caliper
    (Part #1066690246)
    x
                

    These bridge bolt kits are intended to service F88 forged aluminum Afco calipers.  Their extreme duty steel construction adds 10-30% stiffness vs. billet caliper models.

    • For F88 Afco forged aluminum calipers
    • 1.25" caliper
    • Includes: Bridge bolt kit

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • M&W MBCB-3 Left Front Caliper Bracket
    M&W MBCB-3 Left Front Caliper Bracket
    (Part #95031014)
    x
                For 3.25" spindle and 3.25" calipers. Fits 10" rotor. 
            
  • Inboard Brake Clamp Spacer
    $19.99
    Inboard Brake Clamp Spacer
    (Part #9402299)
    x
                Black anodize brake clamp spacer for floating one-piece brake mount. 
            

Filter

"Open Wheel, Disc Brakes and Accessories" Page 1 of 29

Page 1 of 29

  • Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    (Part #83525013365)
    x
                

    These radial mount caliper brackets are designed for use with 11.75" to 12.19" rotors.  They fit Wilwood NDLR style racing calipers and come with all necessary hardware.

    • Radial mount caliper bracket kit
    • 11.75" to 12.19" rotors
    • Billet aluminum
    • Wilwood NDLR style calipers
    • Hardware included
  • Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    (Part #91031980)
    x
                Get the hot new Wilwood NDL caliper, 2 brake bads, axle clamp with bolts and Speedways solid mount, drilled 12.19" x .810" iron rotor. 

    Components available separately.

  • Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    (Part #83516010475)
    x
                

    Wilwood's Drilled Steel brake rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads.

    • Solid steel 
    • Front mounted
    • Bolt Circle: 3 x 5"
    • Threads:  Thru
    • Weight: 3.2 lbs
    • Face: drilled & scalloped

    CRotor Measure Schematic 

    Steel Front Rotor Application Chart

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    (Part #83523010483)
    x
                
    These steel bolt kits from Wilwood Brakes work with dynamic rotor mount kits and feature a zinc coated finish. They include all hardware needed.
    • Dynamic S mount rotor bolt kit
    • Includes:
      • (8) 5/16" 12-point bolts
      • (8) T-Nuts
      • (8) Washers

     

  • 2 Piece Aluminum Inboard Clamp
    $189.99
    2 Piece Aluminum Inboard Clamp
    (Part #6261669)
    x
                

    Clamps to Winters axle. Made for easy install of a inboard break system.

     

    • 7" 8- rotor bolt pattern. 

     

  • Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    (Part #83514013502)
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • Heat Shield For 2 Inch Single Quick Change Pads
    Heat Shield For 2 Inch Single Quick Change Pads
    (Part #94031043)
    x
                

    Made for Ultra Lite Brakes 100 Series Floating Caliper. Heat shield is .065" thick.

  • Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    (Part #8351304955)
    x
                These replacement o-ring seals from Wilwood are designed for use with GM style calipers with 2-3/4" piston diameter.
    • For Wilwood GM Caliper with 2.75" piston
    • 4/pk

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    (Part #1066630040)
    x
                AFCO set out in 2012 to take their market leading  caliper to the next level. The previous billet calipers have been  winning races over the last 10 years. With race technology improving  over the years, they knew it was time to revolutionize their caliper  line. After testing the new calipers all summer with multiple wins and  over 5000 laps in some of the most punishing conditions, they are proud  to provide their customers with the best calipers in racing. Many racers  think that brakes don't matter and all calipers are created equal, but  we know from testing that these calipers help win races!
    • Stiffest caliper on the market
    • Less brake heat
    • Extra wheel clearance
    • Universal mounting
    • Forged 6061 aluminum construction
    • 1/8" NPT inlet port
    • Speed bleeders installed for quick and easy maintenance
    • Heavy duty steel bridge bolts add 10% increase in stiffness
    • Internal brake fluid passages
    • Billet pistons with hard coat anodizing
    • 3-1/2" mount spacing
    • For 1.25" thick rotors
    • 1-3/4" piston
  • Wilwood 140-11762 Titanium Inboard Brake Kit
    $1,004.99
    $1,107.99
    Wilwood 140-11762 Titanium Inboard Brake Kit
    (Part #83514011762)
    x
                

    Dynapro Radial Sprint Inboard Kit Features: A fully engineered bolt-on brake system for sprint car quick change rears with 3.00 x 46 splined axles. With titanium or Super Alloy.810 vented discs and a newly designed dynamic mount rotor axle clamp, are the lowest rotating weights available for Sprint racing. The lightweight advantages of the titanium rotor are fortified with the high durability, long wear, and superior heat control properties of advanced PolyMetallic coating technology. Forged billet DynaPro radial mount calipers with Composition Metallic pads, produce superior stopping power and consistent fade-free response. Kit includes Axle Clamp with Dynamic Mount Rotor Adapter assembly with T-nuts and Radial Mount Bracket and mounting hardware.

    Instructions (PDF) 

  • Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    (Part #1066690292)
    x
                

    These replacement pistons are intended to service your F88 forged aluminum AFCO calipers with a 1.38" bore. 

    • For F88 AFCO forged aluminum calipers
    • 1.38" bore
    • Billet pistons feature hard coat anodizing that provides great wear resistance and long life
    • Includes: Replacement piston

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Sprint Left Front Brake Kit with Speedway Brake Rotor
    Sprint Left Front Brake Kit with Speedway Brake Rotor
    (Part #91031960)
    x
                We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.875" aluminum Speedway brake rotor and mounting bolts. 

    Components also available separately.

  • Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    (Part #9402700)
    x
                

    Speedway's Aluminum Sprint Brake Rotors are machined from billet plate for excellent balance, flatness, and true rotation. Rugged construction resists thermal distortion while the black anodized finish prevents corrosion. Fits popular 3 x 5" Sprint & Midget front hubs.

    Works best with Speedway 156 pads or Wilwood PolyMatrix Q pads.

    Aluminum Rotors Application Chart

  • Wilwood 270-10757 Rotor Hub Kit
    $295.99
    $318.99
    Wilwood 270-10757 Rotor Hub Kit
    (Part #83527010757)
    x
                
    • Dynamic rotor mount with 6 x 5.5" bolt pattern
    • High strength lightweight aluminum
    • Includes rotor adapter and bolt kit
  • AFCO 7242-0074 F33i Series 1.75 Inch Caliper O-Ring Kit
    AFCO 7242-0074 F33i Series 1.75 Inch Caliper O-Ring Kit
    (Part #10672420074)
    x
                

    Service Parts for US Brake F33i Series Calipers

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

     

  • Wilwood 150-9756K Dynapro Brake Pads for Titanium Rotor
    Wilwood 150-9756K Dynapro Brake Pads for Titanium Rotor
    (Part #8359756)
    x
                

    These high-temperature racing pads manufactured by Wilwood measure .5" in thickness, 1.98" in width and 2.32" in height.

    • High friction throughout temperature range, High temperature range.
    • Formulation specific for use with Polymetalic coated rotors
    • Sold in set of 4 pads

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Afco 6690259 Bridge Bolt Kit for .810 Inch F33 Forged Aluminum Caliper
    Afco 6690259 Bridge Bolt Kit for .810 Inch F33 Forged Aluminum Caliper
    (Part #1066690259)
    x
                

    These bridge bolt kits are intended to service F33 forged aluminum Afco calipers.  Their extreme duty steel construction adds 10-30% stiffness vs. billet caliper models.

    • For F33 Afco forged aluminum calipers
    • .810" caliper
    • Includes: Bridge bolt kit

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Wilwood 120-1064 Billet Spot Caliper, 1.75 Piston, .12/.38 Inch Disc
    Wilwood 120-1064 Billet Spot Caliper, 1.75 Piston, .12/.38 Inch Disc
    (Part #8351201064)
    x
                

    Wilwood’s 1.75” diameter single piston Billet Spot Caliper is ideal for Micro and Mini Sprint, Kart, Off Road, Motorcycle, Drag Race Spindle Mount and industrial applications. Designed for light duty use, this floating caliper weighs just 1.20 pounds and holds a round .25” thick, .7 cubic inch brake pad, and accommodates rotors from 6.00” to 13.00” diameter and widths starting at .12”. Maximum rotor width can be adjusted by specific bracket and spacer dimensions. The pads are held in place by stainless steel 10-24 x .38” long flat head cap screw (screws are included), and the caliper is available black anodized.

    • 1.75” diameter single piston
    • Micro and Mini Sprint racing applications
    • Hardware included
    • Black anodized finish
  • AFCO 7242-0075 F33i Series 1.38 Inch Caliper O-Ring Kit
    AFCO 7242-0075 F33i Series 1.38 Inch Caliper O-Ring Kit
    (Part #10672420075)
    x
                

    Service Parts for US Brake F33i Series Calipers

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 29